Supply of equipment and tools for preparation of HTA & LV insulated cables.
Power tools intended for screwing the MV connections of the bearing for mechanical tightening fittings and lugs (RSM) and accessories.
Hand tools for preparing MV insulated cables,
TST and non-TST hand tools for preparing LV insulated cables.
Supply of flame protection tarpaulins to protect fitters in excavation.
Supply of spades and cable cutters and accessories.
Supply of a tightening device for low voltage insulation perforation fittings or for mechanical tightening fittings for underground distribution networks.
Supply of hydraulic presses for crimping on battery.
EDF SEI and Strasbourg electricity will be able to benefit, if they wish and at their first request, from the commercial conditions of the contract (s) awarded by Enedis for its needs, via a stipulation clause for others inserted in the or the steps).
Supply of a power tool with impact for Mechanical clamping connection (RSM) as well as its accessories.
Estimated annual non-contractual quantity of around 340 materials.
This device is an end-of-life product which is likely to disappear during the market within the Enedis company.
Adjustable tools suitable for all types of synthetic cables (including cables HN 33 S 23, NF C 33-223, UTE C 33 223 or cable 2000 and UTE C 33-226).
Estimated annual non-contractual quantity of around 345 materials.
TST LV and non-TST insulated tools which are intended for the preparation of Low Voltage (LV) cables and mainly the removal of the sheath of live and off cables.
These are pliers fitted with rollers allowing the longitudinal and circular cutting of the sheaths.
As a complementary function, the pliers can strip the insulators of overhead cables.
Estimated annual non-contractual quantity of around 330 materials.
These are specific flame-retardant tarpaulins for the protection of fitters in excavation with respect to surrounding cables and accessories.
These tarpaulins are placed on the other materials being excavated to prevent the sun from having an impact on the materials it covers.
Estimated annual non-contractual quantity of around 70 materials.
The pick and cable cutter essentially performs the following two functions:
- tapping, in order to ensure the absence of tension on the cables of underground MV and LV networks,
- cutting and shearing of the cable after checking for the absence of tension.
Estimated annual non-contractual quantity of around 80 materials.
An identification file will be requested on this material.
This classic power-driven screwdriver must operate without impact.
A torque reducer fixed on an extendable support can be adapted to the screwdriver. This device must meet the following functional requirements:
- tightening of fittings (without shocks),
- dimensional compatibility with underground connections,
- mechanical compatibility with fittings.
In addition, the device will be equipped with the following functions:
- machine (power tool):
—— a screwing / transport / unscrewing function,
—— a mains charging system,
—— a 12 V vehicle charging system
—— lighting (optional),
- shaping adapter for 240 mm sector
- the machine must be able to be replaced by a commercial portable device without impact (screwdriver type).
Estimated annual non-contractual quantity of around 210 materials.
An identification file will be requested on this material.
Portable hydraulic press head 12 t in U and head 12 t in C on battery suitable for crimping connectors.
Rounding die 240 mm
Estimated annual non-contractual quantity of around 100 materials.