The subject of the contract shall be supplies of natural aggregates broken within the meaning of Article 7 (4) of the PZP (together with transport service — deployment) for maintenance and construction of roads in the administrative area of Forest Forest District under the Regional Directorate of State Forests in Zielona Góra.
“Delivery of aggregates to Świebodzin Forest District”Natural broken aggregate with continuous grain 0/63mm - 4 632 t
Natural crushed aggregate with continuous grain 0/31.5 mm - 12 375 t
Natural crushed aggregate with continuous grain 0/5 mm — 440 t
A. Required properties of aggregate for mixtures with continuous grain fractions of 0-63 mm and 0-31.5 mm:
a) Grain - category not lower than: GA85.
(b) Grain tolerance limit — category not lower than: GTA20.
(c) Percentage of grains of crushed and broken area — category not lower than: C90/3.
d) Dust content — category: f9, f12, f15.
e) Flatness index — category not higher than: FI50.
(f) Shape indicator — category not higher than: SI55.
g) Frost resistance — category not higher than: F2.
h) Superabsorbability: category not higher than: WA242.
i) Contents of foreign pollutants: none.
j) Sand indicator — category: SE4 minimum 35.
B. Required properties of aggregate for mixtures with continuous grain fraction 0/5 mm:
a) Grain - category not lower than: GF85.
b) Superabsorbability: category not higher than: WA242.
c) Sand indicator — category: SE4 minimum 35.
C. Required properties of sand for road purposes with a grain variety of grain ratio: category not lower than: U3:
(a) Variety of grain: category not lower than: U3;
b) Water permeability indicator: category k10≥6*10-5;
(c) Sand indicator — Category SE4 minimum 35.
Additional information (for all parts) is included in SWZ
“Delivery of aggregates to Krzystkowice Forest District”Natural crushed aggregate with continuous grain 0/63mm — 3 450 t
Natural crushed aggregate with continuous grain 0/31.5 mm — 1 507 t
Natural crushed aggregate with continuous grain 0/5 mm — 190 t
Sand for road purposes with a grain variety of grain ratio not lower than category U3 — 3 086 t
A. Required properties of aggregate for mixtures with continuous grain fractions of 0-63 mm and 0-31.5 mm:
a) Grain - category not lower than: GA85.
(b) Grain tolerance limit — category not lower than: GTA20.
(c) Percentage of grains of crushed and broken area — category not lower than: C90/3.
d) Dust content — category: f9, f12, f15.
e) Flatness index — category not higher than: FI50.
(f) Shape indicator — category not higher than: SI55.
g) Frost resistance — category not higher than: F2.
h) Superabsorbability: category not higher than: WA242.
i) Contents of foreign pollutants: none.
j) Sand indicator — category: SE4 minimum 35.
B. Required properties of aggregate for mixtures with continuous grain fraction 0/5 mm:
a) Grain - category not lower than: GF85.
b) Superabsorbability: category not higher than: WA242.
c) Sand indicator — category: SE4 minimum 35.
C. Required properties of sand for road purposes with a grain variety of grain ratio: category not lower than: U3:
(a) Variety of grain: category not lower than: U3;
b) Water permeability indicator: category k10≥6*10-5;
(c) Sand indicator — Category SE4 minimum 35.
Additional information (for all parts) is described in SWZ
“Delivery of aggregates for county road no 1166F on Kłodnica — Axes section”Natural crushed aggregate with continuous grain 0/63mm — 4 985 t
Natural crushed aggregate with continuous grain 0/31.5 mm — 2 400 t
Natural crushed aggregate with continuous grain 0/5 mm — 290 t
A. Required properties of aggregate for mixtures with continuous grain fractions of 0-63 mm and 0-31.5 mm:
a) Grain - category not lower than: GA85.
(b) Grain tolerance limit — category not lower than: GTA20.
(c) Percentage of grains of crushed and broken area — category not lower than: C90/3.
d) Dust content — category: f9, f12, f15.
e) Flatness index — category not higher than: FI50.
(f) Shape indicator — category not higher than: SI55.
g) Frost resistance — category not higher than: F2.
h) Superabsorbability: category not higher than: WA242.
i) Contents of foreign pollutants: none.
j) Sand indicator — category: SE4 minimum 35.
B. Required properties of aggregate for mixtures with continuous grain fraction 0/5 mm:
a) Grain - category not lower than: GF85.
b) Superabsorbability: category not higher than: WA242.
c) Sand indicator — category: SE4 minimum 35.
C. Required properties of sand for road purposes with a grain variety of grain ratio: category not lower than: U3:
(a) Variety of grain: category not lower than: U3;
b) Water permeability indicator: category k10≥6*10-5;
(c) Sand indicator — Category SE4 minimum 35.
Additional information (for all parts) is described in SWZ
“Delivery of aggregates to the Cybinka Forest District”Natural crushed aggregate with continuous grain 0/31.5 mm - 1 430 t
Natural crushed aggregate with continuous grain 0/5 mm — 283 t
A. Required properties of aggregate for mixtures with continuous grain fractions of 0-63 mm and 0-31.5 mm:
a) Grain - category not lower than: GA85.
(b) Grain tolerance limit — category not lower than: GTA20.
(c) Percentage of grains of crushed and broken area — category not lower than: C90/3.
d) Dust content — category: f9, f12, f15.
e) Flatness index — category not higher than: FI50.
(f) Shape indicator — category not higher than: SI55.
g) Frost resistance — category not higher than: F2.
h) Superabsorbability: category not higher than: WA242.
i) Contents of foreign pollutants: none.
j) Sand indicator — category: SE4 minimum 35.
B. Required properties of aggregate for mixtures with continuous grain fraction 0/5 mm:
a) Grain - category not lower than: GF85.
b) Superabsorbability: category not higher than: WA242.
c) Sand indicator — category: SE4 minimum 35.
C. Required properties of sand for road purposes with a grain variety of grain ratio: category not lower than: U3:
(a) Variety of grain: category not lower than: U3;
b) Water permeability indicator: category k10≥6*10-5;
(c) Sand indicator — Category SE4 minimum 35.
Additional information (for all parts) is included in SWZ
“Delivery of aggregates to the area of Forest District Brzózka”Natural broken aggregate with continuous grain 0/63mm -12 390 t
Natural broken aggregate with continuous grain 0/31.5 mm - 11 264 t
Natural broken aggregate with continuous grain 0/5 mm - 671 t
Sand for road purposes with a grain variety of grain ratio not lower than category U3 - 4 279 t
A. Required properties of aggregate for mixtures with continuous grain fractions of 0-63 mm and 0-31.5 mm:
a) Grain - category not lower than: GA85.
(b) Grain tolerance limit — category not lower than: GTA20.
(c) Percentage of grains of crushed and broken area — category not lower than: C90/3.
d) Dust content — category: f9, f12, f15.
e) Flatness index — category not higher than: FI50.
(f) Shape indicator — category not higher than: SI55.
g) Frost resistance — category not higher than: F2.
h) Superabsorbability: category not higher than: WA242.
i) Contents of foreign pollutants: none.
j) Sand indicator — category: SE4 minimum 35.
B. Required properties of aggregate for mixtures with continuous grain fraction 0/5 mm:
a) Grain - category not lower than: GF85.
b) Superabsorbability: category not higher than: WA242.
c) Sand indicator — category: SE4 minimum 35.
C. Required properties of sand for road purposes with a grain variety of grain ratio: category not lower than: U3:
(a) Variety of grain: category not lower than: U3;
b) Water permeability indicator: category k10≥6*10-5;
(c) Sand indicator — Category SE4 minimum 35.
Additional information (for all parts) is included in SWZ
“Delivery of aggregates to the Gubin Forest District”Natural crushed aggregate with continuous grain 0/63mm — 1 625 t
Natural crushed aggregate with continuous grain 0/31,5 mm — 705 t
Natural crushed aggregate with continuous grain 0/5 mm — 100 t
Road sand with a grain variety of grain ratio not lower than category U3 — 1 808 t
A. Required properties of aggregate for mixtures with continuous grain fractions of 0-63 mm and 0-31.5 mm:
a) Grain - category not lower than: GA85.
(b) Grain tolerance limit — category not lower than: GTA20.
(c) Percentage of grains of crushed and broken area — category not lower than: C90/3.
d) Dust content — category: f9, f12, f15.
e) Flatness index — category not higher than: FI50.
(f) Shape indicator — category not higher than: SI55.
g) Frost resistance — category not higher than: F2.
h) Superabsorbability: category not higher than: WA242.
i) Contents of foreign pollutants: none.
j) Sand indicator — category: SE4 minimum 35.
B. Required properties of aggregate for mixtures with continuous grain fraction 0/5 mm:
a) Grain - category not lower than: GF85.
b) Superabsorbability: category not higher than: WA242.
c) Sand indicator — category: SE4 minimum 35.
C. Required properties of sand for road purposes with a grain variety of grain ratio: category not lower than: U3:
(a) Variety of grain: category not lower than: U3;
b) Water permeability indicator: category k10≥6*10-5;
(c) Sand indicator — Category SE4 minimum 35.
Additional information (for all parts) is included in SWZ
“Delivery of aggregates to the area of the Lubsko Forest District”Natural broken aggregate with continuous grain 0/63mm — 8 555 t
Natural crushed aggregate with continuous grain 0/31.5 mm -3 880 t
Natural crushed aggregate with continuous grain 0/5 mm — 404 t
Road sand with a grain variety of grain ratio not lower than category U3 — 11 704 t
A. Required properties of aggregate for mixtures with continuous grain fractions of 0-63 mm and 0-31.5 mm:
a) Grain - category not lower than: GA85.
(b) Grain tolerance limit — category not lower than: GTA20.
(c) Percentage of grains of crushed and broken area — category not lower than: C90/3.
d) Dust content — category: f9, f12, f15.
e) Flatness index — category not higher than: FI50.
(f) Shape indicator — category not higher than: SI55.
g) Frost resistance — category not higher than: F2.
h) Superabsorbability: category not higher than: WA242.
i) Contents of foreign pollutants: none.
j) Sand indicator — category: SE4 minimum 35.
B. Required properties of aggregate for mixtures with continuous grain fraction 0/5 mm:
a) Grain - category not lower than: GF85.
b) Superabsorbability: category not higher than: WA242.
c) Sand indicator — category: SE4 minimum 35.
C. Required properties of sand for road purposes with a grain variety of grain ratio: category not lower than: U3:
(a) Variety of grain: category not lower than: U3;
b) Water permeability indicator: category k10≥6*10-5;
(c) Sand indicator — Category SE4 minimum 35.
Additional information (for all parts) is described in SWZ
“Delivery of aggregates to the Torzym Forest District”Natural crushed aggregate with continuous grain 0/63mm — 2 883 t
Natural crushed aggregate with continuous grain 0/31.5 mm — 11 017 t
Natural crushed aggregate with continuous grain 0/5 mm — 375 t
Road sand with a grain variety of grain ratio not lower than category U3 — 15 638 t
A. Required properties of aggregate for mixtures with continuous grain fractions of 0-63 mm and 0-31.5 mm:
a) Grain - category not lower than: GA85.
(b) Grain tolerance limit — category not lower than: GTA20.
(c) Percentage of grains of crushed and broken area — category not lower than: C90/3.
d) Dust content — category: f9, f12, f15.
e) Flatness index — category not higher than: FI50.
(f) Shape indicator — category not higher than: SI55.
g) Frost resistance — category not higher than: F2.
h) Superabsorbability: category not higher than: WA242.
i) Contents of foreign pollutants: none.
j) Sand indicator — category: SE4 minimum 35.
B. Required properties of aggregate for mixtures with continuous grain fraction 0/5 mm:
a) Grain - category not lower than: GF85.
b) Superabsorbability: category not higher than: WA242.
c) Sand indicator — category: SE4 minimum 35.
C. Required properties of sand for road purposes with a grain variety of grain ratio: category not lower than: U3:
(a) Variety of grain: category not lower than: U3;
b) Water permeability indicator: category k10≥6*10-5;
(c) Sand indicator — Category SE4 minimum 35.
Additional information (for all parts) is included in SWZ
“Delivery of aggregates to the area of Forest District Przytok”Natural crushed aggregate with continuous grain 0/63mm — 6 108 t
Natural crushed aggregate with continuous grain 0/31.5 mm — 3 044 t
Natural crushed aggregate with continuous grain 0/5 mm — 289 t
Sand for road purposes with a grain variety of grain ratio not lower than category U3 — 548 t
A. Required properties of aggregate for mixtures with continuous grain fractions of 0-63 mm and 0-31.5 mm:
a) Grain - category not lower than: GA85.
(b) Grain tolerance limit — category not lower than: GTA20.
(c) Percentage of grains of crushed and broken area — category not lower than: C90/3.
d) Dust content — category: f9, f12, f15.
e) Flatness index — category not higher than: FI50.
(f) Shape indicator — category not higher than: SI55.
g) Frost resistance — category not higher than: F2.
h) Superabsorbability: category not higher than: WA242.
i) Contents of foreign pollutants: none.
j) Sand indicator — category: SE4 minimum 35.
B. Required properties of aggregate for mixtures with continuous grain fraction 0/5 mm:
a) Grain - category not lower than: GF85.
b) Superabsorbability: category not higher than: WA242.
c) Sand indicator — category: SE4 minimum 35.
C. Required properties of sand for road purposes with a grain variety of grain ratio: category not lower than: U3:
(a) Variety of grain: category not lower than: U3;
b) Water permeability indicator: category k10≥6*10-5;
(c) Sand indicator — Category SE4 minimum 35.
Additional information (for all parts) is described in SWZ
“Delivery of aggregate to the area of the Dimension Forest District”Natural crushed aggregate with continuous grain 0/63mm — 15 190 t
Natural crushed aggregate with continuous grain 0/31,5 mm — 9 100 t
Natural crushed aggregate with continuous grain 0/5 mm — 910 t
Road sand with a grain variety of grain ratio not lower than category U3 — 6 020 t
A. Required properties of aggregate for mixtures with continuous grain fractions of 0-63 mm and 0-31.5 mm:
a) Grain - category not lower than: GA85.
(b) Grain tolerance limit — category not lower than: GTA20.
(c) Percentage of grains of crushed and broken area — category not lower than: C90/3.
d) Dust content — category: f9, f12, f15.
e) Flatness index — category not higher than: FI50.
(f) Shape indicator — category not higher than: SI55.
g) Frost resistance — category not higher than: F2.
h) Superabsorbability: category not higher than: WA242.
i) Contents of foreign pollutants: none.
j) Sand indicator — category: SE4 minimum 35.
B. Required properties of aggregate for mixtures with continuous grain fraction 0/5 mm:
a) Grain - category not lower than: GF85.
b) Superabsorbability: category not higher than: WA242.
c) Sand indicator — category: SE4 minimum 35.
C. Required properties of sand for road purposes with a grain variety of grain ratio: category not lower than: U3:
(a) Variety of grain: category not lower than: U3;
b) Water permeability indicator: category k10≥6*10-5;
(c) Sand indicator — Category SE4 minimum 35.
Additional information (for all parts) is described in SWZ
“Delivery of aggregates to Babimost Forest District”Natural broken aggregate with continuous grain 0/63mm — 3 613 t
Natural broken aggregate with continuous grain 0/31.5 mm — 1 845 t
Natural crushed aggregate with continuous grain 0/5 mm — 168 t
Road sand with a grain variety of grain ratio not lower than category U3 — 885 t
A. Required properties of aggregate for mixtures with continuous grain fractions of 0-63 mm and 0-31.5 mm:
a) Grain - category not lower than: GA85.
(b) Grain tolerance limit — category not lower than: GTA20.
(c) Percentage of grains of crushed and broken area — category not lower than: C90/3.
d) Dust content — category: f9, f12, f15.
e) Flatness index — category not higher than: FI50.
(f) Shape indicator — category not higher than: SI55.
g) Frost resistance — category not higher than: F2.
h) Superabsorbability: category not higher than: WA242.
i) Contents of foreign pollutants: none.
j) Sand indicator — category: SE4 minimum 35.
B. Required properties of aggregate for mixtures with continuous grain fraction 0/5 mm:
a) Grain - category not lower than: GF85.
b) Superabsorbability: category not higher than: WA242.
c) Sand indicator — category: SE4 minimum 35.
C. Required properties of sand for road purposes with a grain variety of grain ratio: category not lower than: U3:
(a) Variety of grain: category not lower than: U3;
b) Water permeability indicator: category k10≥6*10-5;
(c) Sand indicator — Category SE4 minimum 35.
Additional information (for all parts) is described in SWZ