The subject of the contract is the delivery and commissioning of orthopedic implants (periprosthetic fracture anastomosis systems): intramedullary nails, small and large fragment plates, LPC boards, titanium plates for fracture fusion, small-fragment plates blocked by limited contact and LISS plates, screws and wires, DHS titanium plates for "Kutno Local Government Hospital" Sp. z o.o. in Kutno.
Package No. 1 - Intramedullary nails (committing)1.1 Set steel: pcs.40,
1.2 Titanium set: pcs.20,
2.1 Set steel: pcs.20,
2.2 Titanium set pcs.20,
3. Intramedullary nail to stabilize fractures of the proximal base of the femur. Titanium nail, solid, in the proximal part derotation pin (screwed into the nail) and telescopic screw (consisting of a universal part terminated with a thread and a guide sleeve of variable length), in the further part two locking holes, one dynamic and the other static (nails 180 and 220 mm long) or in the long version – three static holes (placed in the front plane). Sizes: length 220mm (125,130,135 degrees – neck-molar angle) diameter 10,12mm ; length 180 mm (130,135 degrees - neck-molar) pcs.120,
4. Intramedullary nail to stabilize fractures of the proximal base of the humerus. Titanium nail, anatomical (right, left), straight, in the long and short version, titanium, solid, in the proximal part four holes for locking screws (threaded) enabling stabilization of fractures of the larger, smaller head massif, preventing the displacement of fragments. In the proximal part, a polyethylene insert (PEEK) prevents the locking bolts from unscrewing. Short version, fully covered with a viewfinder. Sizes: 150,220,250,280mm, diameter of the proximal part 10mm, further 8 (150mm) and 7mm (other) pcs.20,
5. Intramedullary nail to stabilize fractures of the humerus shaft. Titanium nail, solid, with an asymmetrical end, inserted ulnar and from the head of the humerus, with a 4-degree epiphyseal molar bend. Possibility of compression . In the further part, locking holes in two planes (AP and sagittal). Sizes: diameter 7 and 8 mm length 180,200,220,240,260,280,300mm. The set consists of: four locking screws, intramedullary nail, plug pcs.20,
6. Intramedullary nail to stabilize fractures of the distal femoral epiphysis, introduced knee-jerk. Titanium nails, solid with a sharp end, four locking holes in the distal part, two in the proximal part. Sizes: avg. 10, 11.12 mm to a length of 240mm covered with a sight. (possibility of using nuts improving stabilization in the osteoporotic bone mounted on 2 screws of the distal part) The set consists of: two screws for the proximal part, two screws for the further part, two nuts, a plug, an intramedullary nail pcs. 50K
7. Titanium dynamic screw plate for fusion of femoral neck intracapsular fractures. Quadruple dynamic fixation in the femoral head, using telescopic screws screwed into the plate. Double distal locking (screws stabilized in the plate). The plate is placed in the subtrochanter area with an angle of 130°. The set consists of: a plate, 3 proximal screws, 2 distal screws pcs. 20.
Package No. 2 - Small and large fragment tiles (consignment)1.Microplate straight 6-16 hole, reconstructive. Board thickness 0.6 or 1mm length 23-89mm. Locked interchangeably: self-tapping or self-drilling cortical screws, with a cross socket. Possibility of using emergency screws, self-tapping. Material: titanium alloy pcs.10,
2. Microplate rectangle 4-12 hole profiled. Plate thickness 0.6mm or 1mm (8-10 holes). Locked interchangeably: self-tapping or self-drilling cortical screws, with a cross socket. Possibility of using emergency screws, self-tapping. Material: titanium alloy pcs.10,
3. Microplate 5 and 6 hole "L" profiled, left and right. Plate thickness for 5otw.: 0,6mm, dimensions 8x20mm, for 6otw.: 1,0mm, dimensions 10x32. Locked interchangeably: self-tapping or self-drilling cortical screws, with a cross socket. Possibility of using emergency screws, self-tapping. Material: titanium alloy pcs.5,
4. Microplate 6 and 7 hole "T" profiled. Plate thickness for 6otw.: 1mm, dimensions 11x32mm, for 7otw.: 0.6mm, dimensions 8x24mm. Locked interchangeably: self-tapping or self-drilling cortical screws, with a cross socket. Possibility of using emergency screws, self-tapping. Material: titanium alloy pcs.5,
5.Microplate 6 and 7 hole "Y" profiled. Plate thickness: for 6otw.: 1mm, dimensions 11x35mm, for 7otw.: 0.6mm, dimensions 9x28mm. Locked interchangeably: self-tapping or self-drilling cortical screws, with a cross socket. Possibility of using emergency screws, self-tapping. Material: titanium alloy pcs.5,
6. Microplate 6 and 9 hole "T" profiled. Plate thickness: for 7otw.: 1mm., dimensions 16x32mm, for 9otw.: 0.6mm, dimensions 12x29mm. Locked interchangeably: self-tapping or self-drilling cortical screws, with a cross socket. Possibility of using emergency screws, self-tapping. Material: titanium alloy pcs.5,
7. 10-hole microplate "T" profiled. Plate thickness 0.6mm, dimensions 15x30mm. Locked interchangeably: self-tapping or self-drilling cortical screws, with a cross socket. Possibility of using emergency screws, self-tapping. Material: titanium alloy pcs.5,
8.Micro trapezoidal plate 6 and 8 hole, profiled, left and right. Plate thickness for 6otw.: 1,0mm, dimensions 9x24mm, for 8otw.: 0,6mm dimensions 11x22mm. Locked interchangeably: self-tapping or self-drilling cortical screws, with a cross socket. Possibility of using emergency screws, self-tapping. Material: titanium alloy pcs.4,
9. Micro parallelogram plate 8 holes, profiled, left and right. Plate thickness 0.6 and 1.0mm. For 0.6mm dimensions 9x24mm, for 1.0mm dimensions 11x28mm. Locked interchangeably: self-tapping or self-drilling cortical screws, with a cross socket. Possibility of using emergency screws, self-tapping. Material: titanium alloy pcs.6,
10.4-hole straight microplate. Dimensions: plate thickness 1.0mm length 21mm and thickness 0.6mm length 17mm. dimensions 11x28mm. Locked interchangeably: self-tapping or self-drilling cortical screws, with a cross socket. Possibility of using emergency screws, self-tapping. Material: titanium alloy pcs.10, 11.Screw ø1,5mm cortex self-drilling, cross socket. Material: titanium alloy pcs.20,
12.Screw ø2,0mm cortex, socket cross. Material: titanium alloy pcs.30,
13.Screw ø2,3mm cortex, socket cross. Material: titanium alloy pcs.20,
14.Self-drilling cortex screw ø2,0mm, cross socket. Material: titanium alloy pcs.50.
Package No. 3 (commission)1.Anatomical palmar radial plate, shaped, blocked to the distal base of the radius, inserted from the palmar side, pcs. 6,
2.Palm radial plate extended anatomically, shaped, blocked to the distal base of the radius, inserted from the palmar side, pcs. 6,
3.Lockable shape plate fitted to the proximal base of the radius. Small right/left version, for radial head with a diameter of 20;22mm, pcs. 6,
4.T plate - wedge and X - wedge, plate width 15mm, wedge height 2 to 7mm every 1mm. Grave tiles 1.8mm. With at least 2 otw. under Kirschner wires 1.0mm for temporary fixing of the plate. Lockable holes for 2.4mm or 2.7mm screws. Self-tapping, screw head with conical and threaded cylindrical part. All screws with torx sockets. Ability to lock floating. The same color of titanium locking plates and screws facilitates the identification and selection of implants. Material: Titanium alloy, pcs. 10,
5.Shapeplate locks for correction of the first metatarsal. Bone part with holes for locking screws and endosseous part inserted into the bone marrow canal, pcs. 10,
6.Locked, self-tapping screw ø2,4mm socket: torx; Material: Titanium alloy, pcs. 20,
7.Cortical screw, self-tapping ø2,7mm socket: torx; Material: Titanium alloy, pcs. 10,
8.Locked, self-tapping screw, variable angle ø2,4mm socket: torx. Screw locking angle change range ±15°. Drill guide limiting the screw insertion angle to ±15°. Material - cobalt alloy, pcs. 30.
Package No. 4 - LPC boards (commissary)1.Reconstructive straight plate, locked, thin. 4-8 lockable holes and 2 compression holes each, pcs. 10,
2.Simple reconstructive plate, locked. 4-10 lockable holes and 2 compression holes, pcs. 10,
3.Shaped plate locks to the proximal base of the humerus. In the molar part 3 to 8 pairs of separate holes – locking and compression, pcs. 5,
4.Brachial plate d/back.side. Shaped plate blocked to the distal base of the humerus, assumed from the posterolateral side. Right/left version, pcs. 5,
5.Brachial plate d/back.side. Shaped plate blocked to the distal base of the humerus, inserted from the medial side. Right/left version, pcs. 5,
6.Shapeplate locks to the proximal base of the ulna. Right/left version, pcs. 10,
7.Palm radius, blocked. Right/left version, 5-11 lockable holes in the molars and separate compression holes. In the socket part, 5 locking holes with multidirectional positioning for reliable stabilization of fragments, pcs. 5,
8.Narrow shape plate L, locked, to the proximal base of the tibia, attached laterally. Right/left version. In the molar part 4 to 8 pairs of separate holes – locking and compression. In the socket part 6 interlockable holes with multidirectional positioning for reliable stabilization of the interlocked fragments. Angled screw positioning. Locking holes with a conical and threaded cylindrical retaining part. Thread around the full perimeter of the hole for some stabilization. No caps/adapters required for lockable screws. Compression holes with bidirectional compression. Having at least 4 holes for 2.0mm Kirschner wires for temporary fixing of the plate. For locking holes, locking screws 3.5mm, self-tapping, screw head with a conical and threaded cylindrical part. For compression holes 3.5 cortical screws with a spherical head. The end of the shaft part of the tile is properly profiled for the introduction of the tile by the minimal cutting method. A molar with undercuts to limit contact between the implant and the bone. The same color of plates and locking screws facilitating the identification and selection of implants, pcs. 10,
9.Tibia plate is lateral. Shaped plate locked, to the proximal base of the tibia, inserted from the lateral side. Right/left version. Tile available in sizes 4÷16 holes, pcs. 10,
10.Shaped mesh plate blocked to the distal base of the tibia, inserted from the medial side. Right/left version. In the molar part 4 to 8 pairs of separate holes – locked and compression, pcs. 10,
11.Shape plate blocked to the distal base of the tibia, inserted from the anterolateral side. Right/left version. In the molar part 4 to 8 pairs of separate holes – locked and compression, pcs. 10,
12.Shaped plate blocked to the distal base of the fibula to the lateral side of the bone. Right/left version. In the molar part 4 to 10 holes: interlockable holes and 2 elongated compression holes, pcs. 20,
13.Lockable cortex screw, Ø 3.5 mm diameter, torx socket. Material: Titanium alloy, pcs. 50,
14.Lockable cortex screw, Ø 2.4 mm diameter, torx socket. Material: Titanium alloy, pcs. 30,
15.Cortical screw Ø 3.5 mm diameter , torx socket. Material: Titanium alloy, pcs. 50.
Package No. 5 - LPC boards (commissary)1.Straight plate wide locking compression with limited contact. 6 to 14 lockable and 2 compression holes. Alternating inclination of lockable holes for reliable stabilization of fragments. Angled positioning of screws, pcs. 5,
2.Shape plate locks to the distal base of the femur, attached laterally. Right/left version. In the molar part 4 to 10 holes, including one compression, pcs. 10,
3.Shaped plate locks to the proximal base of the femur. Right/left version. In the molar part 2 to 8 holes, lockable holes and one compression hole, pcs. 5,
4.Femoral shaft fusion plate, 10-16 holes, length 209-333mm. Material: titanium alloy, pcs. 15,
5.Lockable cortex screw, diameter Ø 5.0 mm, torx socket. Material: Titanium alloy, pcs. 30,
6.Cannulated locking screw, diameter Ø 7.3mm. Material: Titanium alloy, pcs. 20,
7.Lockable cortex screw, sponge, diameter Ø 6.5 mm, torx socket. Material: Titanium alloy, pcs. 50K
8.Cortical screw, diameter Ø 4.5mm, torx socket. Material: Titanium alloy, pcs. 20.
Package No. 6 - Titanium plates for fracture fusion (commissary)1.3.6mm side tibial plate, 2mm left and right plate head thickness, 5 to 21 hole counts, 80 to 288mm plate length. Plaque reducing contact with the bone. Titanium material, pcs.1000,
2.Diagnocal tibia plate with a thickness of 4mm, a plate head thickness of 2.2mm left and right, the number of holes from 4 to 14, the length of the plate from 117 to 252mm. Plaque reducing contact with the bone. Titanium material, pcs.700,
3.Closer lateral tibia plate with 3.6mm thickness, 2mm plate head thickness left and right, number of holes from 4 to 16, plate length from 83 to 239mm. Plaque reducing contact with the bone. Material: titanium, pcs.620,
4.Radial tibia proximal medial with a thickness of 4.2mm, a plate head thickness of 2.2mm left and right, the number of holes from 4 to 14, the length of the plate from 109 to 239mm. Plaque reducing contact with the bone. Titanium material, pcs.500,
5.Lateral agittal sagittal plate with a thickness of 2.5 mm, left and right, number of holes from 3 to 7, plate length from 73 to 125 mm. Plaque reducing contact with the bone. Titanium material, pcs.1000,
6.Limited contact straight plate with a thickness of 3.2mm and a width of 11.5mm, number of holes from 4 to 12, length of the plate from 59 to 163mm. Titanium material, pcs.700,
7.3.5mm self-tapping locking cortex screw from 10 to 90mm, screw length change range from 10 to 50mm, 2mm steps, 50 to 90 every 5mm. Additionally available screws with a length of 35 and 45mm. Titanium material, pcs.100,
8.3.5mm self-tapping cortex screw from 12 to 90mm length, screw length change range from 12 to 50mm, 2mm steps, 50 to 90 every 5mm. Material: titanium, pcs.25,
9.Closer lateral tibia plate blocked by minimally invasive method LISS with a thickness of 4.8 mm, left and right, number of holes from 5 to 13, plate length from 141 to 301 mm, plate width 16mm, plate head width 21.5mm. Plaque reducing contact with the bone. Material: titanium, pcs.900,
10.Further lateral blockade femur plate inserted by the minimally invasive method LISS with a thickness of 5.5 mm, left and right, number of holes from 5 to 13, plate length from 155 to 315 mm, plate width 16.5mm, plate head width 35mm. Plaque reducing contact with the bone. Titanium material, pcs.1000,
11.5.0mm self-tapping bark screw 18 to 100mm locked, screw length change range from 18 to 50mm, 2mm step, 50 to 100 every 5mm. Material: titanium, pcs.100.
package No. 7 - Screws and wires (delivery)1.Titanium screw washer Ø3,5 ; Ø4,5 from D-10 to D-15, pcs.30,
2. Soft wire for cerklażu Ø0,8;0,9; 1,0, 12 rolls,
3."Self-tapping cortical bone screws, hexagonal socket Ø 4,5; x 1.75 from L-12 to L-70", pcs.50,
4.Self-tapping screws for sponge bone, hexagonal socket, Ø 6.5 whole threaded from L-40 to L-140, pcs.25,
5.Self-tapping screws for sponge bone, hexagonal Ø6,5 with thread in the middle length from L-30 to L-140 pcs.25,
6.Self-tapping screws for sponge bone, hexagonal Ø6,5 with thread in 1/31 length from L-30 to L-140, pcs.50,
7."Cannulated screw Ø 7,0 full threaded L 25-130 mm", pcs.10,
8.Cannulated screw Ø 7,0 A=16 mm from L-35 to L-130, pcs.10,
9.Cannulated screw Ø 7,0 A=32 mm from L-35 to L-130, pcs.10,
10.Cannulated screw- Ø 4,5 socket 6-point, threaded in 1/3 of the length, self-tapping for guide wire Ø1,15-1,6 from L-25 to L-80, pcs.20,
11.Cannulated screw- Ø 4,5 socket 6-point, threaded along the entire length, self-tapping, for guide wire Ø1,15-1,6 from L-25 to L-80, pcs.20,
12.Washer for cannulated screws Ø6,5 ; Ø7,0 from D-10 to D-15, pcs.30,
13."Drill for drill connector type AO R 2,0 ;3,2; 3,7; 4,5", pcs.10,
14.Reamer for drilling machine connector type AO R6,5; 4,5; 3,5; length 150mm, pcs.10,
15.Automatic feeder for hexagonal screws connector type AO length 150mm, pcs.20, drill bit length 150-300 mm Ø 2; 3,2; 3,5:3,7; 4,5, pcs.20,
16.Ř – 1 ;1,2 ;1,4; 1,6 ,1,8,2,0:3,0( L-310 mm), pcs.2000, Ř – 1;1,2 ;1,4; 1,6 ,1,8,2,0:3,0 (L-150 mm), pcs 2000, L-170 mm and 210 mm ; Ø4,0mm, pcs.20,
17.L-180mm i210mm ; Ø4,5 mm, pcs20, L-180mm i210mm ; Ø5,0, pcs.20, "Schanz tip twister L-120-220mm ; Ø=5,0mm threaded at the end", pcs. 30.
Package No. 8 - DHS Tytan (commission)1.DHS limited contact with 135° molar-neck angle. Number of holes from 2 to 15. Tile lengths from 52 mm to 276 mm. Material: titanium, pcs. 30,
2.DHS/DCS neck screw. Screw lengths from 50 mm to 110 mm. Material: Titan, pcs. 30,
3.LAG DHS type compression screw of one size. Material: titanium, pcs. 30,
4.4.5mm diameter cortical screw. 3mm shaft diameter, 8mm head diameter. Sizes 16-60mm. Sizes 16-60 mm every 2 mm. Material: titanium, pcs. 70,
5.Titanium self-tapping locking screw, diameter 3.5mm, length 10-65mm, 10-50mm every 2mm, 50-65mm every 5mm, additional 35mm and 45mm. Material: titanium, pcs. 60,
6.3.5mm cortex screw from 12 to 50mm length, screw length change range from 12 to 50mm, 2mm steps, Titanium material, pcs. 60.