The Unstrut-Hainich-Kreis is planning to convert and renovate the Salza Hall in Bad Langensalza, which was built in 1994 and is currently used for school sports and for the competitive sport of the Thuringian Handball Club. Two main measures are planned. In the first, a new grandstand building is to expand the hall's capacities and a directly attached player wing is to be created. In the second measure, the necessary renovation and renovation measures will extend to the roof and facade of the Salza hall, and on the other hand, the general expansion as well as the technical and sanitary facilities must be repaired. The aim here is the sustainable construction of the building to ensure school sports operations and the modernization of the technical facilities to current standards.

- BE, mobile scaffolding, working and protective scaffolding approx. 300 sqm, surface scaffolding approx. 200 sqm;

- preparatory work:

—— Close installation slots approx. 250 m;

—— holes close approx. 500 pieces;

- masking off approx. 3,000 sqm;

—— Sand plastered areas, float, wash about 1 100 square meters.

- Plastering and filling work:

—— Clean windows / doors (afterwards) approx. 200 m;

- Clean the steel frame (afterwards) approx. 25 pieces;

—— wall openings + wall opening various sizes approx. 15 pieces;

—— KS masonry fill approx. 115 square meters;

—— drywall fill approx. 750 sqm;

—— wall joints to concrete filler approx. 700 m;

—— Filling ceiling joints approx. 250 m;

—— Surface filler on concrete approx. 850 sqm.

- painting:

—— primer wall + ceiling approx. 7,000 sqm;

—— Grind walls approx. 6 100 square meters;

—— glass fabric approx. 500 sqm + reveals approx. 100 m;

—— Disp.color (various versions) approx. 8600 sqm;

—— Steel frames coat approx. 80 pieces;

—— Sheet metal doors / corner frames coat approx. 11 pieces;

—— Round concrete supports (sanding, priming, painting) approx. 250 m;

—— railings (reconditioning) 1 pc. (Including flat iron, top chord, etc.);

—— Heating pipes paint about 115 m;

—— Floor coating about 250 square meters;

—— preparation of concrete surface approx. 900 sqm;

—— Epoxy coating about 450 square meters.

- joints and profiles:

—- angle profile approx. 150 m;

—- movement joints approx. 25 m;

—- corner protection bracket approx. 150 m;

—- Acrylic joint approx. 3,000 m;

—- silicon joint approx. 2,000 m.