Purchase of bicycle boxes, purchase of

Bicycle collection garages, purchase of bicycle racks

The 1: Fahrradüberdachung

Roof width: approx. 13,500 mm (dimensions +/- 10% possible). The canopy can consist of several elements, through which these dimensions are approximately achieved. Roof depth between 2,200 mm and 2,500 mm (one-sided cantilever). Total height > 2,200 mm, <2,750 mm. Clear height (lowest point)>=2,000 mm

Lot 2: Bicycle enclosures in two different lengths

Roof width 1 : 10,000 mm (dimensions +/- 10 % possible)

Roof width roof 2: 3,000 mm (dimensions +/- 5 % possible)

Roof depth between 2,200 and 2,500 mm (one-sided projection), total height > 2,200 mm, <2,750 mm, clear height (lowest point)>=2,000 mm

Round or rectangular frames made of steel as load-bearing side elements which are connected in the roof area by 2 purlins. Monopitch roof, roofing trapezoidal sheet metal. Fastening in on-site foundations.

Lot 3: single-storey bicycle racks (leaning brackets), 120 units in expandable modular design, of which 66 hot-dip galvanized and 54 powder-coated. Wheelbase 500 mm (low/high arrangement), paved or asphalt pavement.

Lot 4: Double-decker bicycle racks: 60 pieces for parking bicycles in two levels (30 below, 30 above), wheelbase 500 mm, surface hot-dip galvanized, placement under an existing canopy on a paved surface.

Lot 5: individually lockable bicycle boxes (invitation to tender for individual parts). The products must be identical (same materiality, dimensions, fit) to the product of the "Aretus Classico by Orion Bausysteme", as these are necessary for the expansion of the already built bicycle parking system. The amount of individual parts corresponds to around 30-40 individual boxes.