UKM83 Inverclyde, East Renfrewshire and Renfrewshire (UK UNITED KINGDOM)
Description:
Invitation to tender for servicing and support of GC1 line equipment including feeders, NIR analyzer, tablet press, blender lifting mechanism, and goods lift with specific technical requirements.
Servicing and Support For the GC1 Line. You are invited to submit a tender for the following requirements; servicing and support for the GC1 line. Feeder/Blender Units Consists of 5 Loss in weight feeders, of various sizes. All 316L SS polished to <0.8µm product contact surfaces with multiple sets of feeder screws each. NIR Analyser Sentronic NIR analyser and probe with a singular measurement channel, measures wavelengths of 1100-2100nm at +/- 1nm using two 5W bulbs (for redundancy) and uses a windows 7 PC connected to standard monitor as an HMI. Korsch Press Korsch X3 tablet press compresses the blended material into tablets, capable of around 150,000 tablets/hr. Capable of taking fill cam of 6-22mm, feeder feeds material at 5-100rpm into the dies in which the tablets are then formed by the turret rotating at 5-120rpm Epsilon Containment Two 316L, <0.4Ra internal, stainless steel glove boxes/drum discharging stations rated to OEB 4 with HEPA filtered extraction to hold the booths at –150Pa during operation. Lifting Device The Blender Lifting Mechanism is designed to lift & position different Blenders from their Home/Starting position to their Operational position. Goods Lift 5.9m (3.6m travel distance) bespoke goods lift used to transport materials and equipment (not personnel) to the top of a stainless-steel platform, at 0.2m/s. Lift has a max working load of 250kg and is operated off a 240V, 20A, controlled by its own independent control panel with E-stop and has electrically interlocked doors.