Steel construction/hydraulic steel construction

site equipment

- temporary wooden plank covering (approx. 35 m2)

- Scaffolding work (stair tower 1 piece up to approx. 4.75 m construction height, side protection approx. 13.4 m)

raking

- Rake (approx. 0.3 to, sheets and hollow sections, stainless steel incl. accessories such as EPDM stop plates, chains, locks etc., clear opening approx. 2.7 m wide x 2.2 m high)

steel pipelines

- Steel pipe pressure pipes DN 1200 (3 strings with a total of approx. 91.3 m incl. fittings, mild steel, coating)

- Ventilation pipes DN 80 in three sections (3 strings with a total of approx. 23.5 m incl. fittings, sealing inserts, stainless steel)

shut-offs

- 2 gate valves approx. 2.7 m wide x 2.2 m high, protective hoods, drive stands, potting, actuators

Railings, ladders, covers, platforms, walkways, stairs and equipment

- Spar and filling bar railings and handrails (hollow sections and sheets, mild steel, hot-dip galvanized, approx. 1.80 tons)

- Climbing brackets, barrier posts (hollow sections and sheets, mild steel, hot-dip galvanized, approx. 0.34 tons)

- Bars, platforms, covers, mobile steel staircase substructure (bars, sections, sheets, structural steel, hot-dip galvanized, approx. 8.2 tons)

- Bars, platforms, covers gratings 30x3 mm (mild steel, hot-dip galvanized, partly with welded tear plates, approx. 56.7 m2)

- Covers tear plates Tr 8 mm (mild steel, hot-dip galvanized, approx. 35 m2)

- Ladders (stainless steel, approx. 64.1 m ladder length, incl. entry aids, fall protection rails, protective equipment, etc.)

- Horizontal rail safety systems (stainless steel, approx. 7.9 m)

- Various items of equipment (signage, safety chains, locks, wall brackets, etc.)

- potting, relining work

End supports, dam beams and floor rails for inspection closures

- Base sleepers (stainless steel, approx. 26.1 m)

- Guide rails (stainless steel, approx. 62.1 m)

- potting

Crane systems

- Bridge crane (lifting capacity 6.3 tons, track centre 9.05 m)

- Crane runways (2 strands, continuously mounted, crane rails A45 approx. 27.9 m, continuous elastic supports approx. 27.9 m, continuous base plates approx. 27.9 m, crane rail clamps with anchorages approx. 124 pieces, including crane runway buffer and track protection)

- potting

- Temporary protective covers, test load, signage, sling chain

General

- Filling and emptying shafts with water to check the leak rate

- Kranprüfung

- commissioning, commissioning and trial setups

Technical processing

- Planning services, documentation/as-built planning, CE marking

-Protocols