Trailed sprayer in the amount of 1 piece

Trailed sprayer.

1. Brand new machine, year of manufacture 2024

2. A valid roadside approval extract valid on the date of delivery is required.

3. Delivery date – up to 6 months from the date of signing the contract.

4. Trailed model, tandem chassis, pneumatically sprung. Two or one steering axle. Working width 42 m.

5. Working liquid tank capacity from 10000L to 12000L. The tank should be made of plastic. Have an electronic liquid level indicator. The tank should be protected against the movement of liquid during transport.

6. The sprayer should have a sheet metal cover for the bottom of the vehicle.

7. Stable main frame on which the working liquid tank is mounted.

8. Rigid or swivel hitch attached to the tractor transport hitch equipped with a vibration damper. K-80 ball hitch.

9. Dual-circuit braking system with automatic brake force adjustment.

10. Tyres 520/85 R42.

11. Track width 200 cm measured between the center of the tires.

12. Work platform with ladder.

13. Enclosed enclosure to protect fittings.

14. Electrical control protected in enclosed enclosure.

15. Transport case.

16. Contoured mudguards to protect the machine from dirt.

17. Lighting installation - road.

18. A piston diaphragm pump (or pumps) with a flow rate of min. 500 l/min. The pump is driven by PTO or hydraulically driven by the tractor hydraulics.

19. Clean water tank min. 500 l for washing the working liquid tank.

20. Water tank with a capacity of min. 20 l for hand washing.

21. Folding inductor with a capacity of min. 50 l with nozzles for water rotation. Nozzle for rinsing packages with an injector. Suction power from pump min. 200 l. Flush gun. Lighting of the interior of the inductor.

22. Two agitators in the spray liquid tank (one agitator works with the sprayer, the other stirs intensively after pouring the solution). Remote control.

23. The sprayer should have a connector/output for emptying the remaining liquid from the tank through the liquid system.

24. Cleaning the working liquid tank with nozzles – min. 4 nozzles.

25. The sprayer should have an external washer.

26. Hydraulic mast with shock absorption. Flashing light on the mast.

27. Stable guided boom with shielded nozzle holders. Hydraulically or electro-hydraulically foldable. Possibility of stabilization of the angular tilt of the beam. Full automatic working boom.

28. Boom work light.

29. Beam with hydraulic protection for transport.

30. Alignment of the boom in the sprayer by combining springs and gas cylinders in case of vertical movements, brake plates and a system to dampen the horizontal movements of the boom and reduce the longitudinal movements of the boom.

31. Nozzle spacing 50 cm.

32. Quadruple nozzle bodies are required.

33. Electro-pneumatic or electric nozzle switching.

34. Circulation of liquid in the circuit with automatic switching.

35. Pressure line emptying system.

36. Suction and pressure filter.

37. Electro-pneumatic pressure control.

38. Automatic flushing of pressure filter.

39. Sprayer function control block – controlled from the tractor panel.

40. Cornering spraying control application

41. Have a function for variable dosing of plant protection products – the so-called field mapping.

42. Can communicate in real time with your smartphone or tablet.

43. Commissioning and training in the use of the sprayer. Training of at least 4 x 8 hours = 32 hours

44. Min. warranty required 24 months from the date of delivery.

45. Response time to failure – max. 2 hours from the moment of informing the Contractor by e-mail about the failure.

The purchaser is an agricultural taxpayer and will use the ordered product for his own needs.