The subject of the contract is the execution of construction works consisting in the construction of dowels along existing logging routes in the forestry of the Ujsoły Forest District.
The designed construction of "dilatation" is characterized by the following technical parameters:
- round coniferous uncovered bark surface,
- road width 3.2 m,
- one-sided road cross section in direction of view.
The load-bearing structure of the dilator is longitudinal beams of round coniferous wood, not barked, diameter 18 cm, anchored in native soil.
Transverse beams are laid on the profiled and compacted soil base -
Deck made of non-barked rollers with an average diameter of 18 cm, length 3.2 m side by side.
In order to stabilize the surface of round wood at intervals of 5.0 m, transverse beams 18 cm diameter, 4.80 m length covered with stakes 5 cm in diameter and 80 cm in length were designed on both sides.
Backfilling with local 5 cm clay soil.
Construction of dilatation in Bendoszka forestry on existing skidding routes.The subject of the contract is the execution of construction works consisting in the construction of dowels along existing logging routes in the forest area of Bendoszka, area of plots 999149, 9147.
Section length in branch 225a - 220 m.
The designed construction of "dilatation" is characterized by the following technical parameters:
- round coniferous uncovered bark surface,
- road width 3.2 m,
- one-sided road cross section in direction of view.
The load-bearing structure of the diluent consists of longitudinal beams of round coniferous wood, not barked, with a "medium" diameter of 18 cm, anchored in native soil.
Transverse beams are laid on the profiled and compacted ground - a deck of non-barked rollers with an average diameter of 18 cm, length 3.2 m side by side.
In order to stabilize the surface of round wood at intervals of 5.0 m, transverse beams 18 cm diameter, 4.80 m length covered with stakes 5 cm in diameter and 80 cm in length were designed on both sides. Backfilling with local 5 cm clay soil.
Preparatory works
- reconstruction of the route axis.
Earthworks
- soil loosening and bulldozer displacement,
- trough together with manual works.
Surface
- soil profiling and compaction; the supporting structure of the dilator is made of transverse beams of round coniferous wood, not barked, with an average diameter of 18 cm,
- clamping at exits by connecting all rollers on the descent section, i.e. 5 m / descents, 3 pcs - 52 clamps per descent /,
- covering the road surface with a 5 cm layer of soil.
In accordance with art. 29 paragraph 3a of the Public Procurement Law, the Employer requires the Contractor (or subcontractor within the meaning of Article 2 point 9b of the Public Procurement Law) that all persons performing the subject of the contract who will perform the activities of actually operators of construction equipment and construction or road workers related to the subject of the contract described in the Bill of Quantity or STWiOR were employed on the basis of an employment contract, with the proviso that the above requirement does not apply to persons performing supervision and supervision activities of implemented construction works and unless they are performed by a given person as part of their business activities.
Construction of dowels in the Cicha forestry on existing skidding routes.The subject of the contract is the execution of construction works consisting in the construction of dowels along existing logging routes in the Cicha forestry area of plots 2972, 2973, 2974.
The length of sections in branches 202a, 203b, 204a, 2203a - 1,135 m.
The designed construction of "dilatation" is characterized by the following technical parameters:
- round coniferous uncovered bark surface,
- road width 3.2 m,
- one-sided road cross section in direction of view.
The load-bearing structure of the diluent consists of longitudinal beams of round coniferous wood, not barked, with a "medium" diameter of 18 cm, anchored in native soil.
Transverse beams are laid on the profiled and compacted ground - a deck of non-barked rollers with an average diameter of 18 cm, length 3.2 m side by side.
In order to stabilize the surface of round wood at intervals of 5.0 m, transverse beams 18 cm diameter, 4.80 m length covered with stakes 5 cm in diameter and 80 cm in length were designed on both sides. Backfilling with local 5 cm clay soil.
Preparatory works
- reconstruction of the route axis.
Earthworks
- soil loosening and bulldozer displacement,
- trough together with manual works.
Surface
- soil profiling and compaction; the supporting structure of the dilator is made of transverse beams of round coniferous wood, not barked, with an average diameter of 18 cm,
- clamping at exits by joining all rollers to cover the road surface with a 5 cm layer of soil.
In accordance with art. 29 paragraph 3a of the Public Procurement Law, the Employer requires the Contractor (or subcontractor within the meaning of Article 2 point 9b of the Public Procurement Law) that all persons performing the subject of the contract who will perform the activities of actually operators of construction equipment and construction or road workers related to the subject of the contract described in the Bill of Quantity or STWiOR were employed on the basis of an employment contract, with the proviso that the above requirement does not apply to persons performing supervision and supervision activities of implemented construction works and unless they are performed by a given person as part of their business activities.
Construction of expansion joints in Morgi forestry on existing skidding routes.The subject of the contract is the execution of construction works consisting in the construction of dowels along existing logging routes in the forest area of Morgi, plots area 2993/3, 3070/6.
The length of sections in branch 223a - 410 mb, in branch 318df - 195 mb.
The designed construction of "dilatation" is characterized by the following technical parameters:
- round coniferous uncovered bark surface,
- one-sided road cross section in direction of view.
The load-bearing structure of the dilator is longitudinal beams of round coniferous wood, not barked, diameter 18 cm, anchored in native soil.
Transverse beams are laid on the profiled and compacted ground - a deck of non-barked rollers with an average diameter of 18 cm, length 3.2 m side by side.
In order to stabilize the surface of round wood at intervals of 5.0 m, transverse beams 18 cm diameter, 4.80 m length covered with stakes 5 cm in diameter and 80 cm in length were designed on both sides. Backfilling with local 5 cm clay soil.
Preparatory works
- reconstruction of the route axis.
Earthworks
- soil loosening and bulldozer displacement,
- trough together with manual works.
Surface
- soil profiling and compaction; the supporting structure of the dilator is made of transverse beams of round coniferous wood, not barked, with an average diameter of 18 cm,
- clamping on exits by connecting all rollers on the descent section, i.e. 5 m / descents 4 pcs - 52 clamps for the descent,
- covering the road surface with a 5 cm layer of soil.
In accordance with art. 29 paragraph 3a of the Public Procurement Law, the Employer requires the Contractor (or subcontractor within the meaning of Article 2 point 9b of the Public Procurement Law) that all persons performing the subject of the contract who will perform the activities of actually operators of construction equipment and construction or road workers related to the subject of the contract described in the Bill of Quantity or STWiOR were employed on the basis of an employment contract, with the proviso that the above requirement does not apply to persons performing supervision and supervision activities of implemented construction works and unless they are performed by a given person as part of their business activities.
Construction of dowels in the forestry Okrągle on existing skidding routes.The subject of the contract is the execution of construction works consisting in the construction of dowels along existing logging routes in the forest forest in Okrągłe, area of plots 17970.
The length of sections in the branch 81b - 160 m.
The designed construction of "dilatation" is characterized by the following technical parameters:
- round coniferous uncovered bark surface,
- road width 3.2 m,
- one-sided road cross section in direction of view.
The load-bearing structure of the dilator is longitudinal beams of round coniferous wood, not barked, diameter 18 cm, anchored in native soil.
Transverse beams are laid on the profiled and compacted ground - a deck of non-barked rollers with an average diameter of 18 cm, length 3.2 m side by side.
In order to stabilize the surface of round wood at intervals of 5.0 m, transverse beams 18 cm diameter, 4.80 m length covered with stakes 5 cm in diameter and 80 cm in length were designed on both sides. Backfilling with local 5 cm clay soil.
Preparatory works
- reconstruction of the route axis.
Earthworks
- soil loosening and bulldozer displacement,
- trough together with manual works.
Surface
- soil profiling and compaction; the supporting structure of the dilator is made of transverse beams of round coniferous wood, not barked, with an average diameter of 18 cm,
- covering the road surface with a 5 cm layer of soil.
In accordance with art. 29 paragraph 3a of the Public Procurement Law, the Employer requires the Contractor (or subcontractor within the meaning of Article 2 point 9b of the Public Procurement Law) that all persons performing the subject of the contract who will perform the activities of actually operators of construction equipment and construction or road workers related to the subject of the contract described in the Bill of Quantity or STWiOR were employed on the basis of an employment contract, with the proviso that the above requirement does not apply to persons performing supervision and supervision activities of implemented construction works and unless they are performed by a given person as part of their business activities.
Construction of expansion joints in the Petkówka forestry sector on existing skidding routes.The subject of the contract is the execution of construction works consisting in the construction of dowels along existing logging routes in the forestry area of Petkówka, plot area 3003/6.
The length of sections in the branch 236l - 210 m.
The designed construction of "dilatation" is characterized by the following technical parameters:
- round coniferous uncovered bark surface,
- road width 3.2 m,
- one-sided road cross section in direction of view.
The load-bearing structure of the dilator is longitudinal beams of round coniferous wood, not barked, diameter 18 cm, anchored in native soil.
Transverse beams are laid on the profiled and compacted ground - a deck of non-barked rollers with an average diameter of 18 cm, length 3.2 m side by side.
In order to stabilize the surface of round wood at intervals of 5.0 m, transverse beams 18 cm diameter, 4.80 m length covered with stakes 5 cm in diameter and 80 cm in length were designed on both sides. Backfilling with local 5 cm clay soil.
Preparatory works
- reconstruction of the route axis.
Earthworks
- soil loosening and bulldozer displacement,
- trough together with manual works.
Surface
- soil profiling and compaction; the supporting structure of the dilatation is made of transverse beams of round coniferous wood, not barked, with an average diameter of 18 cm,
- covering the road surface with a 5 cm layer of soil.
In accordance with art. 29 paragraph 3a of the Public Procurement Law. The Employer requires the Contractor (or subcontractor within the meaning of Article 2 point 9b of the Public Procurement Law) that all persons performing the subject of the contract who will perform the activities of actually operators of construction equipment and construction or road workers related to the subject of the contract described in the Bill of Works or STWiOR were employed on the basis of an employment contract, with the proviso that the above requirement does not apply to persons performing supervision and supervision activities of implemented construction works and unless they are performed by a given person as part of their business activities.