The tender shall relate to the procurement of TV spuling and well inspection to all entities of the contracting entity unless otherwise indicated in the Annex Folder of the contract 5 company-specific annexes. For more detail of the benefits offered, including the minimum requirements to meet, please refer to the requirements specification (Annex 2) and the list of offers (Annex 3), TAG (Annex 4) and any corrections and answers to questions. The tasks may be planned or can be ordered ad hoc. The tasks must be able to be implemented throughout the workare.The maximum financial framework for the total contract with all four subagreements amounts to 19,650,000 DKK for 3 years as well as 6,550,000 DKK for the option.Emergency tasks may occur, in these situations will be the bidder contacted by contracting entities or his supplier on the contract 'Slamsugerspuling and pump overhauling' .The tasks include: • Spuling and TV inspection of main wires.• Spulsing and TV inspection of electrical lines incl. wellstick.• Well inspection and reporting.• Measurement of wells and points with GPS.• Maintenance and repair tasks such as root cutting, removal of on-squatting etc. with industrial spul and cutter.Conditions of this document, apply to all types of tasks under this agreement. Where contracting entities have specific (other) requirements/needs for the performance of the task, this will appear in the company-specific Annexes, Annex Folder 5 and apply only to the utility company concerned. The estimated scope and quantities of the task are set out in the terms of tender and in Annex Folder 3 - Offer list under the tabs.It is important that the bidder notes that the starting point for the settlement is always done in the light of the quantity-based services contained in TAG. Annex 4. If the bidder needs to invoice according to items in TAG, which are stypulated benefits/additional benefits, this can only be done in exceptional cases and where it is previously agreed and approved by the supply.

This sub-agreement is voluntary for Faxe Supply and is not bound by the award. The tender shall relate to the procurement of TV spuling and well inspection to all entities of the contracting entity unless otherwise indicated in the Annex Folder of the contract 5 company-specific annexes. For more detail of the benefits offered, including the minimum requirements to meet, please refer to the requirements specification (Annex 2) and the list of offers (Annex 3), TAG (Annex 4) and any corrections and answers to questions. The tasks may be planned or can be ordered ad hoc. The tasks shall be able to be implemented throughout the workare.The maximum financial framework for this subcontract amounts to SEK 5,250,000 for 3 years as well as SEK 1,750,000 for the option.Emergency tasks may occur, in these situations the bidder will be contacted by contracting entities or its supplier on the contract 'Slamsucker spuling and pump overhaul' .The tasks include: • Spuling and TV inspection of main wires.• Spulsing and TV inspection of electrical lines incl. wellstick.• Well inspection and reporting.• Measurement of wells and points with GPS.• Maintenance and repair tasks such as root cutting, removal of on-squatting etc. with industrial coil and cutter.Conditions in this document, apply to all types of tasks under this agreement. Where contracting entities have specific (other) requirements/needs for the performance of the task, this will appear in the company-specific Annexes, Annex Folder 5 and apply only to the utility company concerned. The estimated scope and quantities of the task are set out in the terms of tender and in Annex Folder 3 - Offer list under the tabs.It is important that the bidder notes that the starting point for the settlement is always done in the light of the quantity-based services contained in TAG. Annex 4. If the bidder needs to invoice according to items in TAG, which are stypulated benefits/additional benefits, this can only be done in exceptional cases and where it is previously agreed and approved by the supply.

The tender shall relate to the procurement of TV spuling and well inspection to all entities of the contracting entity unless otherwise indicated in the Annex Folder of the contract 5 company-specific Annexes.For details of the services offered, including the minimum requirements the benefits must meet, please refer to the requirements specification ( Annex 2) and the list of offer (Annex 3), TAG (Annex 4) and any corrections and answers to questions.The tasks may be planned or can be ordered ad hoc. The tasks shall be able to be implemented throughout the workare.The maximum financial framework for this subcontract amounts to SEK 5,250,000 for 3 years as well as SEK 1,750,000 for the option.Emergency tasks may occur, in these situations the bidder will be contacted by contracting entities or its supplier on the contract 'Slamsucker spuling and pump overhaul' .The tasks include: • Spuling and TV inspection of main wires.• Spulsing and TV inspection of electrical lines incl. wellstick.• Well inspection and reporting.• Measurement of wells and points with GPS.• Maintenance and repair tasks such as root cutting, removal of on-squatting etc. with industrial coil and cutter.Conditions in this document, apply to all types of tasks under this agreement. Where contracting entities have specific (other) requirements/needs for the performance of the task, this will be shown in the company-specific Annexes, Annex Folder 5 and apply only to that utility company.The estimated volume and quantities of the task are set out in the terms of tender and Annex Folder 3 - Offer list under the tables.It is important that the bidder notes that the starting point for the settlement is always done on the basis of the quantity-based services contained in the TAG. Annex 4. If the bidder needs to invoice according to items in TAG, which are stypulated benefits/additional benefits, this can only be done in exceptional cases and where it is previously agreed and approved by the supply.

The tender shall relate to the procurement of TV spuling and well inspection to all entities of the contracting entity unless otherwise indicated in the Annex Folder of the contract 5 company-specific Annexes.For details of the services offered, including the minimum requirements the benefits must meet, please refer to the requirements specification ( Annex 2) and the list of offer (Annex 3), TAG (Annex 4) and any corrections and answers to questions.The tasks may be planned or can be ordered ad hoc. The tasks shall be able to be implemented throughout the workare.The maximum financial framework for this subcontract amounts to DKK 3,900,000 for 3 years as well as SEK 1,300,000 for the option.Emergency tasks may occur, in these situations the tenderer will be contacted by contracting entities or its supplier on the contract 'Slamsucker spuling and pump overhaul' .The tasks include: • Spuling and TV inspection of main wires.• Spulsing and TV inspection of electrical lines incl. wellstick.• Well inspection and reporting.• Measurement of wells and points with GPS.• Maintenance and repair tasks such as root cutting, removal of on-squatting etc. with industrial coil and cutter.Conditions in this document, apply to all types of tasks under this agreement. Where contracting entities have specific (other) requirements/needs for the performance of the task, this will be shown in the company-specific Annexes, Annex Folder 5 and apply only to that utility company.The estimated volume and quantities of the task are set out in the terms of tender and Annex Folder 3 - Offer list under the tables.It is important that the bidder notes that the starting point for the settlement is always done on the basis of the quantity-based services contained in the TAG. Annex 4. If the bidder needs to invoice according to items in TAG, which are stypulated benefits/additional benefits, this can only be done in exceptional cases and where it is previously agreed and approved by the supply.

This agreement is a voluntary framework agreement for Ringsted. The tender shall relate to the procurement of TV spuling and well inspection to all entities of the contracting entity unless otherwise indicated in the Annex Folder of the contract 5 company-specific Annexes.For details of the services offered, including the minimum requirements the benefits must meet, please refer to the requirements specification ( Annex 2) and the list of offer (Annex 3), TAG (Annex 4) and any corrections and answers to questions.The tasks may be planned or can be ordered ad hoc. The tasks shall be able to be implemented throughout the workare.The maximum financial framework for this subcontract amounts to SEK 5,250,000 for 3 years as well as SEK 1,750,000 for the option.Emergency tasks may occur, in these situations the bidder will be contacted by contracting entities or its supplier on the contract 'Slamsucker spuling and pump overhaul' .The tasks include: • Spuling and TV inspection of main wires.• Spulsing and TV inspection of electrical lines incl. wellstick.• Well inspection and reporting.• Measurement of wells and points with GPS.• Maintenance and repair tasks such as root cutting, removal of on-squatting etc. with industrial coil and cutter.Conditions in this document, apply to all types of tasks under this agreement. Where contracting entities have specific (other) requirements/needs for the performance of the task, this will be shown in the company-specific Annexes, Annex Folder 5 and apply only to that utility company.The estimated volume and quantities of the task are set out in the terms of tender and Annex Folder 3 - Offer list under the tables.It is important that the bidder notes that the starting point for the settlement is always done on the basis of the quantity-based services contained in the TAG. Annex 4. If the bidder needs to invoice according to items in TAG, which are stypulated benefits/additional benefits, this can only be done in exceptional cases and where it is previously agreed and approved by the supply.