The purpose of the procurement is to conclude a framework contract for the purchase of surgical nets, network fixers and incontinence slings on the basis of the designations and descriptions given in Annex 1 to HD.

• Polypropylene non-resorbable hernia mesh• Pore size at least 1.0 mm • Mesh weight 80 - 85 g/m2

• Mesh fixable with surgical suture material • Intended for alloplasty of hernias of the anterior abdominal wall and strengthening of the abdominal wall

• Made of polydiaxanone and lactite/glycolite polymer • The instrument can be inserted through a 5mm troacar and allows fixation from an angle of 30 degrees • The retainers melt within 48 weeks • The retainer is clamp-shaped, the depth is 6.7mm and the foot grip length is 4.9mm • The instrument handle has an indicator of the number of retainers • The selection must include 25 and 12 fixer stamps • Disposable

• Made of lactite/glycolite polymer • The instrument can be inserted through a 5mm troacar • The retainers melt for 12 months • The retainer has a screw-shaped length of 4.1mm, width is 5.1mm • The choice must include 30 and 15 fixer stamps • Disposable

• The material consists of non-resorbable monofilamentous polyester and resorbable polylactide acid (micro- influenza), which allow the mesh to entangle (attach) to the tissue surface.

• The absorption time of polylactic acid is up to 15 months • The weight of the network before the absorption of "micro-flus" is up to 73 g/m2 and after absorption no more than 38 g/m2 • The porosity of the network is at least 1.1 x 1.7 mm

Description of the part in Annex 1.

• Laparoscopically placed nets through the abdomen in case of a gynecological hernia

• The mesh is elastic, porous (tissues can grow through), is woven by a method that binds all fiber connections and allows elasticity in both directions. • Material monofilament polypropylene

• Laparoscopically placed nets through the abdomen in case of a gynecological hernia.

• A single mesh used in the laparoscopic colposacropexia technique for the surgical treatment of uterine/vaginal prolapse.

• non-resorbable material, • Y-shaped, light mesh, • pore size 2.8mm².

• Laparoscopically placed nets through the abdomen in case of a gynecological hernia.

• A single mesh system installed in the laparoscopic colposacropexia technique used for the surgical treatment of uterine/vaginal prolapse.

• material non-resorbable biostable polyvinyl fluoride monofilament (PVDF) • adapted to porosity according to the part of the network • Y-shaped

• Laparoscopically placed nets through the abdomen in case of a gynecological hernia

• Laparoscopically/abdominally placed colposarocephaly nets

• The mesh is elastic, porous (tissues can grow through), is woven by a method that binds all fiber connections and allows for elasticity in both directions.• The mesh can be cut according to the desired shape and size without branching

• Laparoscopically placed nets through the abdomen in case of a gynecological hernia. •Ready-made network according to pectopexia op.technique

• Material non-resorbable biostable polyvinyl fluoride monofilament (PVDF). • Customized porosity according to part of the network

The description of the part is in Annex 1.

• The material consists of non-resorbable monofilamentous polypropylene

• Pore size at least 1.0 mm • Mesh weight 30-40 g/m2 • Mesh fixable with surgical suture material

• Prescribed for alloplasty of hernias of the anterior abdominal wall and strengthening of the abdominal wall

The description of the part is in Annex 1.

•retropubic inside-out system • Slings for the treatment of stress incontinence (TVT)

• The set includes one taped blue mesh measuring 45x1.1 cm, connected to plastic insertion covers and an arched troactor-mesh insertor.•Troacar lab size 2.7mm, arc radius 8.26cm.

• The mesh is covered with a removable film to facilitate the movement of the net between the tissues and to prevent the network from becoming infected.

•Vaginal biological mesh.

•Resorbable biological prosthetic vaginal discharge for support/correction of the anterior and posterior walls of the vagina

• collagen-containing material for the restoration of soft tissues • biocompatible and immunologically inert • supports cell proliferation and neovascularization, no fibrotic encapsulation • the service life of the product at the time of acquisition is at least 5 years

• Pre-shaped, reinforced edges polypropylene non-resorbable hernia mesh • Pore size of at least 1.0 mm • Mesh weight 30 - 45 g/m2

• The mesh can be used unfixed, if necessary, can be fixed with surgical suture material

• Prescribed for laparoscopic alloplasty of hernias of the anterior abdominal wall and strengthening of the abdominal wall

• 50% resorbable monofilamentous light grid • Resorbable part resorbing time of at least 80 days

• The weight of the net after the melting of the resorbable part is less than 30g/m2 • The mesh has large pores, 3-4mm • Landmark strips are applied to the net

• Mesh fixable with surgical suture material or special retainers

• Prescribed for alloplasty of hernias of the anterior abdominal wall and strengthening of the abdominal wall

• Self-tapping biocomponent network

• The material consists of non-resorbable monofilamentous polypropylene and resorbable polylactic acid ( micro-influenza), which allows the mesh to entangle (attach) to the tissue surface • The absorption time of polylactic acid is up to 15 months• The weight of the network before the absorption of " micro-flu" is up to 80 g/m2 • The weight of the net after melting of the resorbable part is no more than 40g/m2 • The porosity of the network is at least 1.6 x 1.0 mm

• The material is monofilamentous polyester, woven in three dimensions

• The mesh is covered on one side with collagen (collagen + glycerol) • On the other side of the net, there must be a central and positioning label to facilitate the installation of the net • The resorption time of the collagen film must be at least 28 days • Pore size not less than 2.3 x 3.3 mm • The weight of the net must not exceed 66 g/cm

• Baasmaterjal – monofilamentne polüpropüleen

• Visceral side of the network with non-joining ePTFE coating • The upper half of the network is covered monofilamentous polypropylene for rapid tissue growth

• Memory ring to keep shape inside the net • Pockets/threads and polypropylene mesh strips for positioning and seams on top of the net

• The retainer is non-resorpable, spiral, made of titanium

• At least 30 fasteners in the tube/handle of the instrument • The length of the working element is at least 35cm • Is disposable

• The retainer is non-resorpable, anchors screw-shaped, covered with a head

• 15 and 30 fasteners in the instrument's tube/handle • The length of the working element is at least 37cm, with measuring markings •List of anchors used on the handle-indicator • Disposable