The service includes the measurement of the completed shell openings (existing walls masonry and drywall walls), the manufacture or manufacture of the interior doors, as well as the transport and installation of the doors on site, including setting the steel leak or steel frame frames. The frames are to be installed first and the door leaves are used with the completion of the floor covering work.

The service includes the measurement of the completed shell openings (existing walls masonry and drywall walls), the manufacture or manufacture of the interior doors, as well as the transport and installation of the doors on site, including setting the steel leak or steel frame frames. The frames are to be installed first and the door leaves are used with the completion of the floor covering work.

Quantities:

Install doors with steel or steel frame

in masonry or drywall, a total of approx. 111 pieces

• approx. 0.885 x 2.135 or 2.26 m approx. 10 pieces

• Approximately 1.01 x 2.01 or 2.135 or 2.26 m approx. 62 pieces

• approx. 1,135 x 2.26 m approx. 37 pieces

• of which 1.26 x 2.01 m approx. 2 pieces

• doors with/without RS and BS requirements

• wet room doors

• doors with sound insulation requirements, 32/ 37 dB or 37/42 dB

• Glass cut-out doors

• stainless steel fittings

Revise a historic wooden swing door

Stainless steel floor and wall door stoppers approx. 111 pieces

Toilet dividers of various sizes approx. 18 pieces