Supply of endoprostheses for PCM Sp. z o.o.

Cementless acetabulum, which consists of a acetabulum covered with titanium sputtering with a porosity of 50%, a spherical acetabulum shape (slightly flattened) .For the choice of an acetabulum operator without opening. fastening screws, with three holes and multi-holes (min 7 holes). Mounting hole of the acetabulum with a cap. pcs 60

Polyethylene cartridge: modular polyethylene insert made of highly cross-linked polyethylene with antioxidant (Vit E). Insert shape: standard, asymmetrical or with hood. Polyethylene inserts for panels in sizes 40 to 70 (incl) and heads growing 22,2mm to 36mm. pcs 40

Modular polyethylene insert standard or with hood. Insoles for panels in sizes 44 to 68 per head 28mm and 32 mm. pcs 30

Sponge screws diameter 6.5 mm for mounting PlasmaFit acetabulum length 16 to 68mm pcs 50

Short pin fastened by titanium alloy bolt, angled in the form of a double wedge, cone 12/14, in the proximal part sputtered with porous cladding of pure titanium. Equipped proximally with additional anti-rotating elements. The system offers two thrywiden- standard and with an increase of 6 mm offset. Length of mandrels from 131.4 mm to 185.4 mm in 13 size. pcs 30

Metal head — on the conus 12/14, diameter fi.22.2 in 2 neck lengths and 28 and 32mm,36mm in 5 neck lengths; pcs 40

Ceramic head — made of ceramic reinforced with zirconium nitride, for cone 12/14, outer diameter 28, 32 and 36mm in 3 neck lengths. pcs 40

Straight flangeless cemented pin made of cobalt-chrome alloy; having in the proximal part two arched “wings” guaranteeing rotational stabininess. Conus cone 12/14. Cervico-molar angle of the stem 135 degrees. Offset variable as size increases. Slamp in 5 sizes. Available mandrel option with 128 degrees cervico-molar angle and increased offset by 6mm over standard mandrels in 4 sizes pcs 5

Centralizer made of PMMA adapted to pin pcs 5

Bipolar head made of high-polished surgical steel with a permanently built polyethylene insert, equipped with an internal ring to prevent dislocation of the inner head; external sizes 39mm to 55mm; internal sizes 22.2 and 28mm pcs 20

“Cement free shank — Type 1 THIRD universal cementless same for right and left hips

12/14. cone having angle 135 with CCD and linearally increasing offset 39.1 mm (size 10) to 50.1 mm (size 21).

Made of titanium alloy, in 1/3 of the proximal part sputtered with pure titanium with a porous structure.

Shape of the stem flat with rectangular section.

Derotation box to prevent the movement of the prosthesis.

A hole in the proximal part to allow possible extraction of the stem.

Sizes min. 9-11 sizes, mandrel option for dysplastic hips (offset increased by 6 mm and CCD angle reduced by 128 by) in 8 sizes.” pcs 30

Monoblock type pinion stem made of solid titanium alloy in 2/3 of the proximal part covered with pure titanium with porous structure and additionally calcium phosphate, konus 12/14 with 2 cervical molars 130o and 135o , forming one of two parts parapet mandrel of a modular cementless. Available in 8 sizes and 6 lengths from 9.75mm to 12.25mm. Every 0.5cm. instrumentarium equipped with handles for implantation from small access and a kit for possible removal of the stem pcs 10

Cement-free mandrel — Type 1 Endoprosthesis, titanium alloy, 1/3 proximal covered with pure titanium porous sputter, straight pin, in the proximal part supplied with two arch-bent “wings” guaranteeing rotational stability and a hole for fixing a special tools for the extraction of the mandrel. Conus cone 12/14. Cervical molar angle of the stem 135 degrees. Offset variable with an increase in size from 39.1 mm to 50.1 mm inclusive. Available with cervical angle stem - molar 128 hundred

Knee revision prosthesis kit consisting of femoral part, tibial part, polyethylene insert. Revision endoprosthesis of the knee joint, cement, anatomical, available in a hinged and hinged rotating version with an anti-luxation mechanism. Rotation of the prosthesis is possible only in flexion. Required availability min 4 sizes for bound and rotating options, for each party (left, right). Possible to use extension pins, expansion pads, polyethylene or titanium for tibial and femoral element. 5

A kit of post-nectal prosthesis of the knee consisting of a femoral part, tibia part, polyethylene insert. Revision endoprosthesis of the knee joint, cement, anatomical, available in a hinged and hinged rotating version with an anti-luxation mechanism. Rotation of the prosthesis is possible only in flexion. Required availability min 3 sizes for bound and rotating options, for each party (left, right). Possibility of using extension pins, expansion pads, polyethylene or titanium for tibial and femoral element.

The poresection element of the bone shaft in lengths from 30mm to 250mm pcs. 3

Cement extension pcs. 16

Thigh pad, anatomical with a thickness of 50 mm polyethylene pcs. 5

Thigh pad, anatomical thickness 80 mm polyethylene pcs. 5

Polyethylene thickness of 10 or 20 mm pcs. 5

Titanium thickness thickness 10,20,40,60,80 mm pcs. 5

Titanium tibia pad thickness 50 mm pcs. 5

Knee revision prosthesis kit consisting of femoral part, tibial part, polyethylene insert. Revision endoprosthesis of the knee joint, cement, anatomical, available in a hinged and hinged rotating version with an anti-luxation mechanism. Rotation of the prosthesis is possible only in flexion. The femur and tibial part forming the monoblock, together with extension shafts of lengths for the femoral part: 160, 182, 185, 190 mm and for the tibia part: 120, 160 mm. The femoral shudder should retain physiological 6 degrees of valgus. Required availability min 4 sizes for bound and rotating options, for each party (left, right). Application of expansion pads, polyethylene or titanium for tibial and femoral element. pcs. 20

Knee revision prosthesis kit consisting of femoral part, tibial part, polyethylene insert. Revision endoprosthesis of the knee joint, cement, anatomical, available in a hinged and hinged rotating version with an anti-luxation mechanism. Rotation of the prosthesis is possible only in flexion. The femur and tibial part forming the monoblock, together with extension shafts of lengths for the femoral part: 160, 182, 185, 190 mm and for the tibia part: 120, 160 mm. The femoral shudder should retain physiological 6 degrees of valgus. Required availability min 4 sizes for bound and rotating options, for each party (left, right). Possibility to use expansion pads, polyethylene or titanium for the tibial and femoral element. Prosthesis covered with an anti-allergenic layer. pcs. 3

Polyethylene cork for bone channel 60

Set of centralizers for cement mandrels of knee revision endoprosthesis 12, 14, 16 mm pcs. 30

Anatomical femoral part (left and right) made of chromococobalt at least in 7 sizes for each side. Additionally, the ability to offer femoral components narrower than standard (M-L projection) pcs. 60

Universal tibia part, made of chromocobalt, modular (not permanently related to polyethylene insert) at least in 11 sizes with the possibility of using extension elements and washers of 4mm and 8mm thickness and obstructive screws.

“Polyethylene insert for 3 degree factory tilt, available in thicknesses of 10, 12, 14, 16,18,20 mm, at least in 5 sizes for each thickness. Fixed on a latch basis, with an additional screw for the tibia part (PS version).

The possibility of selecting resection of the tibial part from the intrameloid or external fixation. Retractive system for measuring articular clawing and bending. Endoprosthesis must provide an intraoperative option to select versions with or without PCL behavior. In the case of PCL resection, it is possible to offer implants without the need to cut the Insall cage (stabilization by polyethylene insert with an enhanced front edge of the so-called ultra congruent). Also available is an option for allergic people (in the composition of ZrN implants). Instrumentarium with the possibility of cooperation with a kinematic computer navigation system (without CT).” pcs. 70

Obstructive screw with diameters 12mm and 14mm pcs. 60

Bone cement 40 g with gentamicin: manual (non-vacuum pump), airtight system for vacuum mixing and cement feeding, with cement l x40) placed factory inside the mixer. pcs. 180

Tibial extension, pcs. 10

augmentation pad pcs. 10

Anatomical femoral part (left and right) made of chromococobalt covered with zirconium nitrate at least in 7 sizes for each side. Possibility to offer femoral components narrower than standard (M-L projection) pcs. 5

Universal tibia part, made of chromocobalt covered with zirconium nitrate, modular (not permanently bound to polyethylene insert) at least in 9 sizes with the possibility of using extension elements and washers of 4mm and 8mm thickness and obstructive screws. pcs. 5

“Knee endoprosthesis, condylar, cemented and cementless, with or without preservation of PCL (PS). Single radial femoral element (so-called single radius) in the functional arc of the bend range of 10-110 degrees for the axis running in or parallel to the non-condylar line in the posterior part of the femoral condyle, anatomical (right, left), made of CoCr alloy, with raised anterior part (so-called anterior flange) to prevent so-called notching, in 8 sizes for each side. Modular tibia tray, universal, made of CoCr alloy, in 8 sizes, fixed bearing technology, with peripheral locked tibial insert and so-called anti-rotation island for additional minimization of insert micromovements. In the option - a cementless tray made of Ti64 titanium alloy and partly with a coating of commercially pure titanium - CpTi, having 4 pegs located peripheral, partially covered with 3D structure, improving the original fixation of the plate in the spongy bone, available in 8 sizes. Insert made of highly cross-linked polyethylene, CR, CS, PS versions, fastened latchally on a tibial tray, with geometry to ensure the movement of the femoral element across the rotary arc - in/outboard rotation, insert in min. 5 thicknesses. In the option for the so-called hard knees - CoCr tibial tray universal revision in 8 sizes with the possibility of using 5mm and 10mm washers and CoCr cemented extensions d. 9mm - length 100,150mm, d. 12mmm,15mm - length 50,100,150mm; femur component with alloy CoCr revision ny (TS) with the possibility of use of distal pads, 5.10,15mm and rear 5.10mm, anatomical (right, left) in 8 sizes, revision insert (TS) of highly cross-linked polyethylene, titanium free extensions lengths lengths 100mm and 150mm, offset element for extensions 2,4,6,8mm.

"

Fur element cemented pcs. 10

Gemless thigh element pcs. 50

Revision femur, pcs. 5

PE insert pcs. 70

PE insert revision pcs. 5

Tibial tray cemented pcs. 10

Tibial tray titanium cement free pcs. 50

Universal revision tibia tray - cemented pcs. 5

Tibial pad, pcs. 10

femoral pad (distal/rear) pcs. 20

Cented tibial extension, pcs. 2

Cement free extension, pcs. 10

Offset thal/tibial 2,4,6,8mm pcs 10

Bone cement with tobramycin 10 x 40g pcs. 2

Disposable set for pressure mixing and feeding cement pcs. 10

Disposable blade for oscillating saw, compatible with the drive used pcs. 70

“Straight molt, proportional conical wedge, made of titanium alloy, in the proximal part covered with porous pure titanium and hydroxyapatite. The spindle has longitudinal anti-rotation grooves. The neck of the stem polished, the distal matte part, at the end truncated to reduce the risk of conflict with the endosteum of the femur. Available in 2 cervico-molar angle options (127 and 132 st) and in 12 sizes for each of the angles, shaft length 93-126 mm, neck length 27-40mm. Type V40 cone (11.3/12.5mm).

As the size increases, the stem increases its size in both lateral and medial directions, better suiting the anatomy of the patient (so-called morphometric shape - as the size of the changing curvature in the medial part increases). Prosthesis developed on the basis of tomographic studies of the internal structure of the femurs of a broad populationThe straight, proportional conical wedge, made of titanium alloy, in the proximal part covered with porous pure titanium and hydroxyapatite. The spindle has longitudinal anti-rotation grooves. The neck of the stem polished, the distal matte part, at the end truncated to reduce the risk of conflict with the endosteum of the femur. Available in 2 cervico-molar angle options (127 and 132 st) and in 12 sizes for each of the angles, shaft length 93-126 mm, neck length 27-40mm. Type V40 cone (11.3/12.5mm).

As the size increases, the stem increases its size in both lateral and medial directions, better suiting the anatomy of the patient (so-called morphometric shape - as the size of the changing curvature in the medial part increases). Prosthesis developed on the basis of tomographic examinations of the internal structure of the femurs of a wide population” pcs. 60

Press-fit acetabulum, hemispheric, made of pure CPTi titanium, covered with a spatial layer of titanium (3-D), allowing bone growth into the acetabulum structure, d. 44-66mm (2mm stroke), full version or with holes pcs. 30

Primary acetabulum, spherical printed from titanium in 3-D technology, covering with spatial structure imitating spongiform bone, enabling overgrowth of bone tissue with its vascularization and innervation, so-called acetabulum biointegration. Friction factor 1,2; acetabulum surface porosity 76%. Available in full and hole options for additional fixation with screws, in the range of external 42-66mm. Possibility of applying the head d. 36mm already to the acetabulum d. 48mm. The acetabulum allows you to apply all articulatory systems: bicobile, ceramic, polyethylene. Optional fastening screws allow for angular fixation in the range of 37 degrees. pcs. 30

CoCr insert for press-fit cementless panels, enabling the use of two-volume articulation, Wed. 36-58mm pcs. 20

Polyethylene wrap-free insert, for two-white articulation for CoCr inserts, for latching the heads of 22.2 or 28mm, outward 36-58mm pcs 20

Polyethylene insert made of crosslink polyethylene, with 10st or without 50 pcs.

Metal head d. 22.2mm, 28mm, 32mm — min. 3 neck lengths, per cone type V40 (11.3/12,5mm) pcs. 20

Metal head CoCr, d. 36,40,44mm high polished, per cone type V40 (11.3/12,5mm). pcs. 30

Ceramic head, d. 28,32,36mm, for cone type V40 (11,3/12,5mm). pcs. 10

Pad cap Press-fit pcs. 30

Titanium acetabulum screw d. 6.5mm, length 15-16mm to 60mm pcs. 30

Bipolar head in outer diameter sizes 40-72mm (range 44-56mm scaling every 1 mm) and inner diameter 22.2mm or 28mm, inner head blocked by locking system, bipolar head design for self-centering of both elements for optimal transfer loads pcs. 30

Straight, smooth, high-polished flangeless, modular, steel, centralizer, tapering distally, at least in 5 offset options to adjust the distance of the head centre from the limb axis regardless of long

Revision endoprosthesis of the hip joint, cementless. Titanium mandrel 2-part (v.proximal trochanteric and part.distally-intramedullary stem), fastened press-fittly in the diaphysimal part of the femoral canal. Conical or cylindrical intrameloid shank, in at least 3 lengths and at least 8 thicknesses. The proximal part made of titanium alloy covered with porous titanium cladding and sputtered with hydroxyapatite, in lengths of 70,80,90,100mm, with variable offset, and in at least 7 thicknesses, angle CCD 132o. Type V40 cone (11.3/12.5mm). The proximal part connected to the distal part by a screw. Anatomical (left/right) hemispheric acetabulum, with axial offset (offset) rotation center, optional screw holes located peripheral and truncated front and top edge (so-called beveled rim), outer diameter 54-80mm, pitch every 2mm; acetabulum covered with spatial layer ego titanium ( CpTi), allowing bone growth into the structure of the acetabulum, providing primary stability and resistance to micro movements. Hemispheric acetabulum, multi-hole, 42-72mm outboard, 2mm pitch, printed in 3-D technology, covered with a spatial layer of pure titanium (CpTi). Titanium basket, made of pure titanium (CpTi), integrated into two bone plates with the possibility of bending or splitting and completed with hook, collection of holes in the dome, anatomical shape, left/right, 48-72mm, stroke every 4mm. Bolts for stabilization of cart, augments and multi-hole acetabulum, d. 6.5mm, length 15-60mm, stroke every 5mm. Pure titanium acetabulum (CpTi), spatial construction allowing the ingrown of bone tissue into the implant - in 18 sizes and 3 sizes: 15,20,25mm. Wed. 46-66mm, stroke every 4mm; equipped with Kirschner wire holes measuring 1.6mm to 2.0mm and bolt holes; hole design allowing insertion of 6.5mm titanium bolts at 18 degrees, independently, in each direction. Color coded implants dimensions depending on size. Cables and plates for periprosthetic fractures.

Revision pcs. 5

3-D printed press-fit acetabulum, multi-hole, outboard 42-72mm pcs. 2

Revision acetabulum, Wed. External 54-80mm pcs. 2

Titanium acetabulum augments, pcs. 4

Titanium acetabulum revision basket, pcs. 2

Titanium screws for cart 6.5mm - length 15-60mm pcs. 10

Steel cables, braided, sterile, d. 2mm - for periprosthetic fractures pcs. 20

Hook steel plate, trochanter, sterile, length 100,110,150,160,200,210mm pcs. 5

Disposable blade for oscillating saw, compatible with the drive used pcs. 5

Anatomical thigh element of the knee joint prosthesis cement in the option with the preservation or excision of PCL, compatible with mobile bearing and fixed bearing inserts, prostheses in sizes 1.5; 2; 2.5; 3; 4; 5; 6. alloy CoCr. pcs. 70

Tibial element of the knee joint cement compatible with fixed bearing insert, prostheses in sizes 1.5; 2; 2.5; 3; 4; 5; 6. titanium alloy. pcs. 80

“Fixed bearing polyethylene insert mounted latchally on the perimeter in the option with the preservation or cutout of PCL. High density polyethylene “cross-link”, in thicknesses: 8mm, 10mm; 12.5mm; 15mm; 17.5mm for each size;

Optional: IUD enabling semi-binding of the prosthesis.

“pcs. 30

Tibial element of the knee joint cement and cementless compatible with mobile bearing insert. The prosthesis spar has anti-rotation wings, prostheses in sizes 2; 2.5; 3; 4; 5; 6. CoCr alloy with highly polished top surface 50

Mobile bearing polyethylene insert in the option with a preservation or with a ligament notch .High density polyethylene in height from 10mm to 17.5 mm for each of the sizes pcs. 50

Distal thigh pads in thicknesses of 4mm, 8mm, 12mm, 16mm and rear in thickness 4mm, 8mm. pcs. 20

Cementless thigh collar in 5 sizes complementing bone cavities inside the seedle pcs. 20

Tibial collar, cementless in 5 sizes complementing bone cavities inside the seedline. pcs. 20

Extension washers in thickness 5mm, 10mm, 15mm pcs. 10

Cement CMW 1x40 gram with or without Gentamecin: pcs. 50

Blades compatible with 100 pcs drive drive

A patella implant embedded on cement in 4 sizes pcs. 5

Revision femur, anatomical knee replacement cement with PCL cut, compatible with cement tibial element, with the possibility of filling flanges inside the squat, and mobile bearing and fixed bearing inserts, prostheses in size 2; 2.5; 3, 4 , 5. Stop CoCr. pcs. 20

Knee tibia element cement compatible with cement femoral element and mobile bearing insert, prostheses in sizes 2; 2.5; 3; 4; 5. CoCr alloy with highly polished upper surface. pcs. 20

Mobile bearing polyethylene insole, rear stabilized. High density polyethylene “cross-link”, in sizes: 10mm; 12.5mm; 15mm; 17.5mm; 20mm; 22.5mm; 25mm; 30mm. pcs. 10

Extension bolt 30mm, 60mm tibial, cement pcs. 5

Extension spit 75mm, 115mm, 150mm, universal, cement-free, anti-rotation. pcs. 10

Adapter 5¶ and 7valgus allowing the use of flanges and mandrels simultaneously pcs. 5

“bolt for adapter

“pcs. 5

The femoral component in three sizes - hinged endoprosthesis, pcs. 5

Polyethylene insert 5

Wedge for hinged component, pcs. 5

Anatomical cement thigh element in min 14 sizes including 10 standard and 4 narrow. A femoral element with a proportional and gradually stoked bend radius. Made of coCr alloy with steel rear thickness. Extruders in the option with rear-end PS cross-visor and leakage of the rear curve star CR. pcs. 70

Tibial component made of CoCr alloy in MB and FB options. In min 10 sizes. Snap system minimizes micro-ear inserts. The screech tray allows the use of the pre-lucid reel. And pcs. 70

Polyethylene insert with antioxidant stabilizing free radicals. In sizes from 5 to 16mm in CR option and 5 to 20mm PS option with an increase of 1-2mm in size. pcs. 70

The patellar component medialized, anatomical for the knee in sizes from 29mm to 41mm. pcs. 5

Polyethylene insole compatible with fb tibial tray, deepened in 7 sizes (1.5 - 6) and 5 heights, from 8mm to 17.5 mm pcs. 10

Tibial element entirely made of polyethylene in min 5 sizes. pcs. 10

Universal tibial component made of CoCr alloy in min 6 MB and FB sizes. Each original size of the part pi

Cement mandrel - smooth steel polished flangeless tapering distally with lengths from 115 mm to 190 mm in 11 sizes, neck angle 135 degrees, mandrel in standard version and High Offset version (laterally offset axis of the stem relative to the center of rotation of the head without changing the angle necks), cone 12/14 with geometry identical to cement shank, pcs 1

Cement acetabulum - made of UHMWPE polyethylene in sizes from 44 mm to 54 mm, inside diameter of the acetabulum 28mm. The acetabulum has radiological marker pc 1

Metal head with a diameter of 28mm in a minimum of 3 sizes of neck length, pcs 1

Bipolar head with double articulation (metal - polyethylene - metal), using additional articulation to reduce the wear of the acetabulum; consisting of an Articul/Eze metal head with a diameter of 22.225 mm in 2 neck neck or 28mm in 5 neck length and a metal outer head having an elliptical shape, with a positive eccentric, ensuring the correct anatomical position and proper arrangement of the working forces; available in 23 sizes (39mm - 65mm) for the inner head with a diameter of 28mm and 19 sizes (39mm - 57mm) for the internal head with a diameter of 22.225 mm; inner head matching the cone 12/14. pcs 1

Stopper for blocking bone channel pcs 1

Cement mandrel - smooth steel polished flangeless tapering distally with lengths from 115 mm to 190 mm in 11 sizes, neck angle 135 degrees, mandrel in standard version and High Offset version (laterally offset axis of the stem relative to the center of rotation of the head without changing the angle necks), cone 12/14 with geometry identical to cement shank, pcs 1

Straight stem, non-anatomical, flangeless, tapering distally, titanium, covered along the entire length with hydroxyapatite, in sizes 115mm to 190 mm long and rectangular cross-section from 8mm to 20mm, cone 12/14mm additionally in options: Cox Vara mandrel in flanged option and High Offset mandrel; and dysplastic mandrel for use in cases of 110 mm CDH in flanged and flangeless options; with the possibility of simple unfolding into a revision option, 100 pcs

Cementless, fixated in the base, non-anatomical, made of titanium alloy, covered with porous cladding and irregular rough titanium plaques for excellent primary stabilization and osteointegration. Available in 13 sizes, standard offset and high offset, allowing direct lateralization without affecting limb length, stem length from 95 to 119 mm, uniform stem growth in M-L dimension by 1.25mm and length by 2 mm between sizes. Lateralization by 6 mm in size 0-3, and 8 mm in size 4-12. Cervical angle 130 degrees and cone 12/14, with narrowed A/P geometry and polished surface to reduce the risk of contact with acetabulum elements. pcs 30

Revision mandrel, made of titanium alloy; straight, with collar, non-anatomical, tapering distally, covered along the entire length with Hydroxyapatite, rectangular in section along the entire length, length of the mandrels: minimum 180 mm to maximum 240 mm inclusive, in a minimum of five sizes. The stem has gaps in the distal part to increase the flexibility of the stem. The cone 12/14, and the revision stem under the “standard “option and “high offset” in a minimum of 9 sizes for each of the options. pcs 10

Cement mandrel - smooth steel polished flangeless tapering distally with lengths from 115 mm to 190 mm in 11 sizes, neck angle 135 degrees, mandrel in standard version and High Offset version (laterally offset axis of the stem relative to the center of rotation of the head without changing the angle necks), cone 12/14 with geometry identical to cement shank pcs 10

“Cement-free hemispheric, press-fit titanium coated with porous titanium full (without holes), three-hole with the possibility of using up to three screws, with diameter sizes ranging from 48mm to 66mm.

All posi acetabulum

Cement molding monoblock type made of polished CoCr alloy, available in 4 diameters: 8mm, 10mm, 12, mm and 14mm and 2 base sizes. 10 pcs.

High mobility polyethylene acetabulum and standard, available in sizes 38mm (+3, +6, +9) and 42mm (+3mm, +6mm, +9mm) pcs. 10

Pad made of a thickness of 9mm (used only for large defect of the humerus root, non-obigatory) pcs. 10

Head made of CoCR, diameter of 38 and 42mm, centric and eccentric pcs. 10

Metapanel fastened with 4 screws at an angle of +/- 10 degrees; pcs. 10

Screw with diameter 4.5mm and lengths 18mm, 24mm, 30mm, 36mm and 42mm (non-obligatory) pcs. 10

Self-locking screw with diameter 4.5mm and lengths 18mm, 24mm, 30mm, 36mm 42mm and 48m (obligate) pcs.

Alternatively: CTA head in sizes 48 and 52 mm and heights 21 and 26 mm; revision (WITHOUT screws AND Metapanels) pcs. 10

Cemetless modular option with hydroxyapatite sputter, available in 4 diameters: 10mm, 12, mm, 14mm and 16mm pcs.

Plate for modular cement option with a medium of 38 and 42mm; symmetrical and asymmertic pcs. 10

High mobility polyethylene acetabulum and standard, available in sizes 38mm (+3, +6, +9) and 42mm (+3mm, +6mm, +9mm) pcs. 10

Pad made of a thickness of 9mm (used only for large defect of the humerus root, non-obigatory) pcs. 10

Head made of CoCR, diameter of 38 and 42mm, centric and eccentric pcs. 10

Metapanel fastened with 4 screws at an angle of +/- 10 degrees; pcs. 10

Screw with diameter 4.5mm and lengths 18mm, 24mm, 30mm, 36mm and 42mm (non-obligatory) pcs. 10

Self-locking screw with diameter 4.5mm and lengths 18mm, 24mm, 30mm, 36mm 42mm and 48m (obligate) pcs.

Alternatively: CTA head in sizes 48 and 52 mm and heights 21 and 26 mm; revision (WITHOUT screws AND Metapanels) pcs. 10

Universal mandrel, made of titanium alloy, cement/cement, in the proximal part covered with porous cladding in sizes 6-16mm for standard and 6-12mm for revision option, length range 83-191mm depending on size of pcs. 10

Proximal element made of titanium alloy, covered with porous cladding, cementless, in a trauma option in 3 heights -5mm, 0mm and 5mm (cervical angle 135o) pcs. 10

In the traumatic option, a centric and non-centric collar enabling the orthopedic threads of bone splinters for endoprosthesis pcs. 10

Non-obligatory: Polyethylene acetabulum fastened with a wedge, 5 smooth bolts, or 3 bolts and anchor bolts, in sizes 40-56m. pcs. 5

Metal head made of cocr alloy, centric and non-centric, size 40-56mm and height of 15, 21mm depending on size. Modular system enabling intraoperative use of the inverted shoulder without the need for replacement of the prosthesis stem element, pcs. 10

Universal mandrel, made of titanium alloy, cement/cement, in the proximal part covered with porous cladding in sizes 6-16mm for standard and 6-12mm for revision option, length range 83-191mm depending on size of pcs. 10

Proximal element made of titanium alloy, covered with porous cladding, cement free, in anatomical option (neck angle 128o, 135oand 142o) pcs.

Obligatory: Polyethylene acetabulum fastened with a wedge, 5 smooth pins, or 3 pins and anchor bolts, in sizes 40-56m. pcs. 10

Metal head made of cocr alloy, centric and non-centric, size 40-56mm and height of 15, 21mm depending on size. Modular system enabling intraoperative use of the inverted shoulder without the need for replacement of the prosthesis stem element, pcs. 10

The parapet, cementless, anatomical, separate for the right and left hips, in the proximal part covered with hydroxyapatite. In the lateral medial plane, the shape of the stem bent into the letter S to match the bone anatomy ideally. The spar is available in 16 sizes and two versions of the cervical angle 126 and 135 degrees. 70 pcs.

Cement-free acetabulum, press-fit, covered with porous titanium dopylated with hydroxyapatite, in outer diameter sizes 44 to 62 mm. The acetabulum with holes for additional stabilization with screws. Hole plugs in set. pcs. 70

Standard polyethylene cartridge and with hood pcs. 70

Metal head with a diameter of 28,32.36 mm in four neck lengths, pcs. 10

Cartridge for acetabulum, high polished, for two-volume version, pcs. 10

Polyethylene head for two-volume version 10

Ceramic head with a diameter of 28,32.36 mm in three neck lengths, pcs. 70

Bolts for acetabulum pcs. 20