Several existing buildings are currently located on the site of the so-called Kirchenwirt in the municipality of Wörthsee. The building of the former Kirchenwirt is to be preserved and renovated as a local building. The remaining existing buildings will be demolished and replaced by 2 new buildings with several residential units. In addition, an event hall and small commercial units are being built on the site.

Tile and slab work must be carried out as part of the construction project.

- approx. 275m2 porcelain stoneware flooring, on surfaces of different sizes, 97x97 mm, d= 6mm, R10B.

- approx. 8m2 tiled floor on a slope for small areas

- approx. 40m2 porcelain stoneware floor covering for surfaces of different sizes, 200x200mm, D= 6-15 mm, R12.

- approx. 285m2 porcelain stoneware wall covering, 97x97mm, D=ca.6 mm

- approx. 570m porcelain stoneware base, 97x297 mm, D=approx. 6mm.

- approx. 20m hollow base made of porcelain stoneware, 20x10 cmm.

- approx. 20m2 porcelain stoneware floor covering in natural stone look, 80x80cm, D= 6mm, R10A.

- expand approx. 40m2 steps and setting steps made of natural stone.

- approx. 32 steps porcelain stoneware in natural stone look, partially. polygonal from approx. 01x1.1m to 0.27x1.6 m, D=12mm

- approx. 22 pcs. setting step made of porcelain stoneware in natural stone look, up to 0.19x1.6 m, thickness = approx. 12mm.

- approx. 55 m skirting board made of porcelain stoneware in natural stone look, h = up to approx. 15cm, thickness = approx. 10.5mm.

- approx. 4m2 outdoor stair platform made of porcelain stoneware in natural stone look, 80x80cm, D= 6mm, surface structured, R11B.

- approx. 25m angle step precast parts, L= up to 1.85m, consisting of stepping and setting step made of porcelain stoneware in natural stone look, D= 20mm, surface structured, R11B.

- approx. 11m skirting board made of porcelain stoneware in natural stone look, h = up to 15cm, D = up to 20mm, surface structured.

- approx. 100m material separation rail, in different lengths.

- approx. 720m silicone joint closure indoors

- approx. 15m corner protection bracket made of stainless steel, 40x40mm

- approx. 16m rubber profile (T-shaped) anti-slip, w = 8mm