Floor coatings

Preparatory work:

- approx. 10 pieces minimum layer thickness tests

- 1 psch Accompanying control processing conditions incl. protocol

- 1 psch tear/damage log OS8 coating

- approx. 800 m2 protective covers made of cardboard and foil, some with hardboard

- sample surfaces for coatings

Subsurface preparation:

- 1 psch General preliminary testing of substrates including protocol

- vacuum sanding approx. 2400 m2 substrates

- Shot blasting approx. 385 m2 substrates

- approx. 40 humidity measurements

- approx. 20 roughness determinations

- approx. 50 pieces of adhesive tensile samples

- Soak cracks approx. 120 m

- Close damaged areas

EP coatings:

- approx. 280 m2 dust-binding EP coatings for floor surfaces

- approx. 215 m2 of thin-layer EP coatings for stair runs, pedestals, anterooms

- approx. 330 m2 diffusion-open EP coatings for floor surfaces

- approx. 25 m2 EP coatings for wall base surfaces (“wipe strips”)

OS8 coatings:

- approx. 1880 m2 OS8 coatings for floor surfaces

- approx. 145 m2 OS8 coatings for wall base surfaces (“wipe strips”)

Markings, joints, profiles:

- parking and road markings, pictrograms for underground parking

- Produce step front edge markings approx. 20 m

- Work up step front edge markings approx. 20 m

- Close parting lines or precast parts approx. 110 m

- Insert finishing profiles into joints approx. 20 m