The Contracting Authority wants to purchase three (3) gas pre-heaters (heat exchange units) and three (3) gas filters incl. commissioning support, spare parts and storage cost in total for installation at Nybro Gas Terminal. The scope is divided into 2 product groups. Each of the 2 product groups (pre-heaters/heat exchanges and gas filters) listed above will be described in separate lot. The technical specification for the gas pre-heaters consist of the following documents:
— Appendix 2A: Data Sheet: Shell and Tube Heat Exchanger (22-300-PD-0016-A Data Sheet — Shell and Tube Heat Exchanger).
The technical specification for the gas filters consist of the following documents:
— Appendix 2A: Data Sheet: filter/separator(18-02015-20 22-300-PD-0019-A 6037076_1_1).
For further details concerning the purchase, reference is made to the tender documents.
The scope of works for this delivery concerns the design, manufacturing, supply, inspection and testing at factory, shipment to site and documentation of gas pre-heaters for the new Europipe II gas receiving terminal at Nybro as part of the Baltic Pipe project.
For the technical requirements for the required gas pre-heaters, please consult attached data sheets. Structural steel as per the structures around the filter/separator are not part of this delivery.
Accessories in components mentioned in the datasheet note 5 are blind flanges, gaskets, nuts, washers and bolts for preservation with nitrogen including valves and pressure indicator.
During the start-up commissioning of the Europipe II gas receiving terminal it might be necessary to introduce a reverse flow of gas as a part of the pressure built-up in the system. Hence the quoted gas pre-heaters shall be able to handle backwards gas flow.
All installation works at the Nybro site will be performed by purchaser — however the supplier might have to be onsite for supervision at commissioning.
See more about the Baltic Pipe project here: https://en.energinet.dk/Infrastructure-Projects/Projektliste/BalticPipe
For further details concerning the purchase, reference is made to the tender documents.
The scope of works for this delivery concerns the design, manufacturing, supply, inspection and testing at factory, shipment to site and documentation of gas filters for the new Europipe II gas receiving terminal at Nybro as part of the Baltic Pipe project.
For the technical requirements for the required gas filters, please consult attached data sheets. Structural steel as per the structures around the filter/separator are not part of this delivery.
During the start-up commissioning of the Europipe II gas receiving terminal it might be necessary to introduce a reverse flow of gas as a part of the pressure built-up in the system. Hence the quoted equipment shall be able to handle backwards flow but as it is for commissioning purposes only and the introduced gas is of commercial specification the equipment does not have to be functional (e.g. no filter insert is acceptable) with backwards flow.
All installation works at the Nybro site will be performed by purchaser — however the supplier might have to be onsite for supervision at commissioning.
See more about the Baltic Pipe project here: https://en.energinet.dk/Infrastructure-Projects/Projektliste/BalticPipe
For further details concerning the purchase, reference is made to the tender documents.