Purchase and delivery of equipment for the needs of Radiology Laboratory Radom Specialist Hospital

Part No. 1: Vascular patches

C.D. from Section VI.3

6.3. Before awarding the contract, the Contracting Authority shall call the highest rated contractor to submit within the specified time limit, not less than 10 days, current as of the date of submission of the following statements or documents:

6.3.1 List of statements or documents made by the Contractor in the proceedings at the request of the contracting party in order to confirm the absence of grounds for exclusion:

(a) current at the date of submission of the Statement in the form of a Single European Procurement Document drawn up in accordance with the model standard form set out in Commission Implementing Regulation (EU) 2016/7 of 5 January 2016/7 of 5 January 2016 /OJ. EU No L 3 of 6.1.2016, p. 16/, /Annex 3 to SWZ/

NOTE: Part IV ONE: The qualification criteria of the contractor are completed only by Part α.

(b) the write-down or information from the National Court Register or from the Central Register and Information on Economic Activities drawn up not earlier than 3 months before its submission, if separate provisions require entry in the register or records, in order to confirm the absence of grounds for exclusion pursuant to Article 109 (1) (4) of the Pzp Act;

(c) if the Contractor is established or domiciled outside the territory of the Republic of Poland, instead of the documents referred to in:

1) b — files a document or documents issued in the country where the contractor is established or domiciled, confirming that no liquidation has been opened or declared bankrupt.

2. The documents referred to in point 1) should be issued no earlier than 3 months before their submission.

3. If, in the country where the contractor is established or domiciled, the documents referred to in point 1 are not issued, they shall be replaced, respectively, in whole or in part, by a document containing the statement of the contractor accordingly, indicating the person or persons entitled to his or her representation, or declaration of the person to whom the document was intended to concern, taken under oath, or, if in the country where the contractor is established or domiciled, there are no provisions of a declaration under oath, made before a judicial or administrative authority, a notary, a body of self-government professional or economic, competent by virtue of the seat or place of residence of the contractor.

5.4. The contracting authority in an unlimited invitation to tender pursuant to Article 139 of the Pzp Act will first examine and evaluate tenders, and then examine whether the contractor whose offer has been assessed as the most favourable is not subject to exclusion and fulfils the conditions of participation in proceeding.

Numbering according to SWZ numbering.

Part No 10: Supporting catheter

Part No. 11: Microbreaker for embolization

Part No. 12: Fogarty's single-channel catheter

Part No 13: Fogarty's catheter two-channel for embolectomy

Part No 14: Mechanical thrombectomy catheter

Part No. 15: Fogarty's catheter

Part No. 16: Titanium Clip Size M

Part No 17: Capping System for dishes

Part No. 18: Distal protection system

Part No. 19: Self-relaxing stent for carotid arteries

Part No 2: PTFE prosthesis for dialysis

Part No. 20: Specialized guide

Part No 21: PTFE Diagnostic Guide

Part No 22: Stent depressurised on balloon

Part No 23: Occupancy for angiography

Part No 24: Syringe with pressure gauge

Part No. 25: Guiding shirt, with marker, reinforced

Part no. 26: Guiding shirt, with marker, reinforced 90 cm

Part No. 27: Self-propulsive Stent to SFA

Part No 28 - 4F Low Profile Stents, 5F Self-Propagable

Part No. 29 - Self-expansion stent for peripheral vessels

Part No 3: Short thin-walled guide jerseys designed for use during procedures within the arteries and peripheral veins

Part No. 30 - Self-expansion nitinol peripheral stent for use in SFA and proximal poplitea

Part no. 31- Nitinol guides, hydrophilic - above 180 cm

Part no. 32 - Interventional guides, hybrid

Part no. 33 - Selective, hydrophilic catheters

Part No. 34 - angiographic needle well visible in ultrasound

Part No. 35 - Disposable CO2 feeding equipment

Part No 36 - 150 ml mark 7 Arterion syringe cartridge

Part No. 37 - Equipment for treatments from foot

Part No. 38 - Vascular cork for vascular embolization

Part No. 39 - OTW balloon catheter 1.5-4mm diameter

Part No. 4: Torquer

Part No. 40 - Paclitaxel coated balloon catheter

Part No. 41 - Indoor self-expansion stent

Part no. 42 - OTW balloon catheter, high pressure

Part No. 43 - Inch Balloon

Part No. 44 - Self-expansion, nitinol stent for superficial and popliteal femoral arteries

Part No 45 - Long thin-walled guide jerseys intended for use during procedures within the arteries and peripheral veins

Part no. 46 - Disposable polymer casings for prostheses I

Part No 47 - Disposable, polymer casings for prosthetics II

Part No. 48 - Vascular Suspensions

Part No. 49 - Disposable Vascular Bulldogs

Part No. 5: Hydrophilic guide for intravascular treatments 0,018”

Part No. 50 - CTO catheter for return to vessel lumen

Part No 51 - Diagnostic angiographic catheters for vascular tests

Part No. 52 - Catheters for thrombolysis

Part No. 6: Stents on a long cabinet with open cell construction

Part No. 7: Balloons on a long wardrobe

Part No 8: Stent for the prevention of congestion in the carotid artery

Part No 9: PTFE vascular prosthesis for dialysis for rapid puncture