The subject of the order is the successive delivery of dressing materials, surgical sets, as well as disposable underwear and drapes

A detailed description of the subject of the contract, the required form, capacity/volume,

dose, unit of measurement, quantity in packaging, quantity of packaging shall be determined by the ASORTYMENTO-PRICE FORMULARY, as set out in Annex No 1 to SWZ.

The offered subject of the contract, as a medical device, must be approved for marketing and use in accordance with the conditions set out in the Act of 07.04.2022. on Medical Devices (Journal of Laws of 2022, item 974, as amended) and have an appropriate certificate, declaration of conformity or other documents required by law. In addition, the offered surgical devices must have sterility class II A rule 7.

Detailed terms and conditions for the performance of the subject matter of the contract are additionally specified in the contractual terms and conditions constituting Appendix No. 5 to the Terms of Reference "Contractual Terms".

Delivery date - according to current needs, each time within a maximum of 2 working days.

Polyurethane dressing on a roll. Acrylic adhesive (hypoallergenic) evenly applied to the entire adhesive surface. 2 layers of protection. Top applicator with metric measuring cup divided into 2 equal parts. Resistant to alcohol-containing disinfectants. Class I medical device

Task No. 10 - description in accordance with Appendix No. 1 to the Terms of Reference.

Task No. 11 - description in accordance with Appendix No. 1 to the Terms of Reference.

Task No. 12 - description in accordance with Appendix No. 1 to the Terms of Reference.

Task No. 12 - description in accordance with Appendix No. 1 to the Terms of Reference.

Dressing adhesive on white non-woven fabric, semi-elastic, with high tack, with vertical perforation every 5 cm for easy splitting without the need for scissors, without backing paper, with acrylic adhesive without allergenic zinc oxide, on roll

Sterile patch; hypoallergenic with a central dressing covered with synthetic rubber or acrylic adhesive, made of elastic, porous non-woven fabric (100% polyester); central absorbent insert protected against attachment to wounds - covered with micro-perforated polyethylene film (micromesh), made of viscose-propylene non-woven fabric (90% + 10%). Rounded edges; Wide tab of protective paper for easy application with protective gloves.

Sterile, non-woven dressing (100% polyester), fully hypoallergenic and non-cytotoxic with an additional absorbent layer (protected against adhesion to the wound) - for fixing venflons with synthetic rubber or acrylic adhesive; secured with strips of paper for easy application; rounded edges, op. cit. a'50pcs (or larger max 150pcs – the Contractor will calculate accordingly).

Task No. 17 - description according to Appendix No. 1

Task No. 18 - description according to Appendix No. 1

Task No. 19 - description according to Appendix No. 1

Bactericidal surgical film, made of polyester, 0.025 mm thick, with an acrylic adhesive containing iodophore, from which molecular iodine with bactericidal effect is released; breathable, stretchable, non-flammable. Class III medical device; CE certified.

Task No. 20 - description according to Appendix No. 1

Knitted support band, 100% viscose, individually packed with: minimum weight 4.8g for width: 5cm, minimum 9g for width 10cm, minimum 14g for width 15cm.

Elastic band woven, individually packed; composition: >60% cotton, >30% polyamide silk; elastomeric yarn.

Disposable mesh dressing sleeve with increased transverse elasticity, fluffy structure and small (or maximum medium) meshes, with the possibility of cutting (does not fray). For supporting dressings of all kinds and sizes, especially on joints, conical and rounded parts of the body, and on wounds and areas exposed to pressure. Composition: grafted yarn from 15% polyurethane yarn and 85% polyamide yarn.

Task No. 24 - description in accordance with Appendix No. 1 to the Terms of Reference.

Bleached lignin without the use of chlorine compounds, sheets 40x60 cm (+/- 1.5 cm) and 5 kg packed in foil and then in a carton max. (3x5kg), single layer weight minimum 36 g/m2, water absorption capacity min. 12 g/g; sinking time maximum 2 s; "slightly corrugated" structure.

Task No. 26 - description in accordance with the Terms of Reference - Appendix No. 1

Task No. 27 - description in accordance with the Terms of Reference - Appendix No. 1

Task No. 28 - description in accordance with the Terms of Reference - Appendix No. 1

Task No. 29 - description in accordance with the Terms of Reference - Appendix No. 1

Exercise NR 3

Task No. 30 - description in accordance with the Terms of Reference - Appendix No. 1

Three-layer surgical drape 180x180cm with adhesive tape. Made of three-layer laminate: 40 micron polyethylene film, viscous non-woven fabric min. 20g/m2 and polypropylene non-woven fabric Total drape weight min. 70g/m2. Resistance of the drape to the passage of liquids.

Sterile surgical drape 200x240cm with a centrally placed hole with a diameter of 12cm made of two-layer laminate: viscose non-woven fabric 23g/m2 / PE film 40 microns. Total weight of the drape min. 60.5 g/m2. Resistance of the drape to the passage of liquids min. 127cmH20, dry tear resistance min. 67kPa, wet tear resistance min. 45kPa. Dispenser type inner packaging.

A set for conductive anaesthesia consisting of: 1 double-layer adhesive drape 50 x 50 cm; 1 washing tool (plastic, simple atraumatic 12 cm); 10 pieces of gas compresses 7.5 x 7.5 cm (ES 12 layers, 17 rivets); 5 pieces of tufflers no. 4, 24 x 24 cm 20 rivets. Packed in crepe paper. Package a'34pcs.

Task No. 34 - in accordance with Section No. 1 to the Terms of Reference

Appendix No. 35 - description according to the Terms of Reference

Appendix No. 36 - description according to the Terms of Use

Appendix No. 37 - description according to the Terms of Use

Appendix No. 38 - description according to the Terms of Reference

Appendix No. 39 - description according to the Terms of Use

Sentence No. 4 - description in Appendix No. 1 to the Terms of Reference.

Disposable surgical set (blouse and pants), minimum weight 40g/m2. Legs without cuffs. The trousers have a pull-on strap made of the same non-woven fabric as the whole set, a sweatshirt with pockets at the bottom of the sweatshirt, at the neck, V-type finish, the material on the entire surface - SMMS 100% polypropylene non-woven fabric. Package of 50 pcs. (or other recalculation by the Contractor accordingly). Sizes S- XXL, available in different colors. Complies with EN 13795.

Task No. 41 - description according to the Terms of Reference

Disposable filtering half mask medical class FFP3 (according to PN-EN 149+A1:2009) without an exhalation valve, worn behind the ears with a clip for fastening behind the head, microbiologically clean, filtration level >99%, designed to protect the respiratory system against particulate aerosols, water-based aerosols (dust, smoke) and aerosols with a liquid dispersed phase (mists), made of multilayer filter material, has a nose clip (the possibility of formatting the half mask within the nose); It provides ease of breathing. The anatomical shape and nose clip ensure an easy fit for most face shapes and ensure a complete seal; penetration of sodium chloride aerosol or oil mist by the filter material ≤ 1%; total leakage ≤ 2%; inhalation resistance at 95 l/min ≤ 300 Pa (3.0 mbar); exhaust resistance 160 l/min ≤ 300 Pa (3.0 mbar).

Half mask compliant with: European harmonized standard PN-EN 149:2001+A1:2009; Regulation (EU) of the European Parliament and of the Council on personal protective equipment 89/686/EEC (EEC), Personal protective equipment category III, Medical device class I. On the product itself, the following marking: manufacturer's name or logo, mask model, filtration class, CE with the number of the notified body, EN 149:2001+A1:2009. Individually packed x 1 pc – max. 10 pcs. contamination protection. On the unit, intermediate or collective packaging, information on the expiry date and batch number.

A disposable, 3-layer blanket to cover the patient made of soft, breathable, quilted material with stitching on the entire surface. Composition: 100% polyester inside + PP non-woven outer layers. Minimum dimensions 110x200cm.

Disposable, highly absorbent, hypoallergenic, operating table pad; The material includes, among others: polypropylene, polyester. It contains a strong, waterproof laminate and an absorbent core (min 0.7 mm thick) along the entire length of the sheet. The product does not cause damage to the patient's skin – smooth, uniform surface / without folds, stitching, etc./. Product weight min. 120 g/m2. Size 100cm x 225cm.

Absorbent pads with a soft shredded cellulose insert with a moisture-proof outer foil; absorbency minimum 1000ml; size: 60x90 cm or 70x90 cm; pack of 30pcs. (or a maximum of 120 pcs. - the Contractor will calculate accordingly).

Non-woven sheet in green, blue or any other colour accepted by the Customer, with a weight of min. 30 g/m2, dimensions: 210cm-240cm x160 cm. Package = 10pcs.

Task No. 47 - description according to the Terms of Use

Task No. 48 - description according to the Terms of Reference

The dressing is made of low-stick viscose knitted fabric; impregnated with polyethylene glycol, containing 10% povidone iodine, 1% pure iodine. Intended for infected and vulnerable wounds.

Task No. 6 - description in accordance with Appendix No. 1 to the Terms of Reference.

Task No. 7 - description in accordance with Appendix No. 1 to the Terms of Reference.

Task No. 8 - description in accordance with Appendix No. 1 to the Terms of Reference.

Task No. 9 - description in accordance with Appendix No. 1 to the Terms of Reference.