Refuse and waste related services | Tenderlake

Refuse and waste related services

Contract Value:
-
Notice Type:
Contract Notice
Published Date:
26 October 2022
Closing Date:
25 November 2022
Location(s):
PL843 Suwalski (PL Poland/POLSKA)
Description:
Waste Faction Management Service Code 19 12 12

The subject of the contract is a waste management service with code 19 12 12, coming from the treatment of mixed and selectively delivered municipal waste as the so-called over-sieve fraction>80 mm, with a value of heat of combustion above 6 MJ / kg of dry matter. The collected batches of waste may differ in value, and any differences will not constitute the basis for the Contractor's claims against the Ordering Party. Transport of waste to the waste management installation will take place by transport organized by the Ordering Party. The waste will be delivered in baled form. The estimated amount of waste to be managed is 5,000 Mg during the term of the contract. The Ordering Party reserves the right to reduce the amount of waste envisaged for management. The actual amount of waste will result from the current needs of the Ordering Party. Waste should be managed in an installation that has a decision allowing the treatment of this waste in accordance with Annex 1 of the Waste Act.

1. The subject of the contract is a waste management service code 19 12 12 — other waste (including mixed substances and objects) from mechanical waste treatment other than those listed in 19 12 11 originating in the Municipal Installation in Suwałki.

2. The amount of waste code 19 12 12 which the Ordering Party will transfer to development during the period of the contract is approximately 5.000 Mg. The monthly amount will be from 500 Mg to a maximum of 1000 Mg, while the maximum daily amount is about 100 Mg. These quantities are estimated and serve the Contractor auxiliarily to prepare the offer and calculate costs, while they do not constitute grounds for any claims thereof. The Ordering Party is not obliged to fulfill the contract full-time. The supply of waste for development will result from the current needs of the Ordering Party.

3. Waste code 19 12 12 constitutes a regularly produced sorting material as a so-called > 80mm supersieve fraction in the form of a caloric fraction of ballast with a combustion heat greater than 6 MJ/kg of dry matter derived from mechanical treatment of waste in the sorting plant — after processing the mixed waste municipal and cleaning waste selectively collected. Received lots of waste may vary as to value, and any differences will not form the basis of the Contractor's claims in relation to the Contracting Authority.

4. Waste covered by this order should be managed in an installation that has a decision allowing the treatment of this waste in a recovery process, in a manner consistent with applicable law in this respect and using a minimum of one recovery process from R1 to R12, specified in the non-exhaustive list of recovery processes constituting Annex 1 to the Act of 14 December 2012 on waste (i.e. Journal of Laws of 2022, item 699, from late. died.).

5. The transport of waste to the installation of waste fraction code 19 12 12 will be carried out by transport organised by the Ordering Party and at its expense.

6. Waste with code 19 12 12 is stored on a hardened yard in bulk or in the form of rectangular bales with dimensions of approx. 80 x 80 x 200 cm prepared on a baling press weighing about 0.8 – 1.1 Mg. The Ordering Party may deliver waste both in the form of bales as well as in loose form and this will depend on the needs of the Ordering Party.

7. The Contractor's installation will be located at a maximum distance of 300 km from the Ordering Party's Municipal Installation, located at 150A Raczkowska Street in Suwałki. If a distance of more than 300 km is specified, the Contractor's offer will be rejected. The distance should be understood as the shortest length of the route on public roads (not internal roads, field roads, etc.) for vehicles with a permissible total weight of 40 tons and more between the Municipal Installation in Suwałki (Raczkowska 150A, 16-400 Suwałki) and the waste management installation with the code 19 12 12 of the Contractor. The Contractor in the offer is obliged to indicate one installation to which the Ordering Party will deliver waste along with the name of the installation, address and distance from the Ordering Party's Municipal Installation located at 150A Raczkowska Street in Suwałki.

Download full details as .pdf
The Buyer:
Przedsiębiorstwo Gospodarki Odpadami w Suwałkach Sp. z o. o.
CPV Code(s):
90500000 - Refuse and waste related services
90513000 - Non-hazardous refuse and waste treatment and disposal services
90513300 - Refuse incineration services
90514000 - Refuse recycling services