The object of the order is delivery along with a devotion in comis: implants and arthroscopic equipment, LCP plates for anastomoses of bone fractures, intramedullary nails, radial bone head endoprosthesis for Kutnowski Self-Government Hospital Sp. z o.o. in Kutno.

1). Implants for stabilization of cartilaginous - bone debris. Biovabsorbable, sterilically packaged implants, head arrows for stabilization of fine cartilaginous fragments in percutaneous technique. Implants made of 96L/4D PLA in Self Reinforced technique. Absorption time between 24 and 36 months. Duration of full support of the stabilized fragment between 20 and 50 weeks after implantation. Implants available in sterile, pre-packaged sets with 1 implant placed in a guide sleeve and percutaneous implantation beater or implants placed in 2 guide sleeves and percutaneous implantation beater. pcs. (with one sleeve) - 1; pcs. (with two sleeves) -1; Single implants - 5.2). Anchors for hairless reconstruction of shoulder joint ring damage made entirely of PEEK synthetic material with a diameter of 4.5 mm and a length of 11 mm in the version with two wings used to reload strands through the implant, wings arranged on the perimeter of the implant. Anchors embedded on a single-use pistol applicator for implant thread and locking, as well as independent control and stress adjustment of each separate thread. Possibility of reloading by implant 1 or 2 strands. Implant complete with 2 super strong threads # 2 or a threadless version. Thread strength for ripping min 7N. Anchor mechanism to control the tension of the thread also after inserting it into the hole in the bone - pc.10; 3). Titanium implants for arthroscopic reconstruction of the rotator cone on a disposable feeder. A sterile set with two threads of increased strength located in the horizontal externally exposed outside the threading part of the implant mesh. Strength of the thread for breaking not less than 7N. - pcs. 100; 4). Titanium implants for arthroscopic reconstruction of the ring, with one thread of increased strength located in an externally exposed externally located outside the threading part of the implant mesh. Strength of the thread for breaking not less than 7N. - pcs.100.

.

1. Straight shaped plate blocked to the distal root of the radial bone, dorsal.

In the molar part of 3-4 interlocked holes and compression holes.

In the socket part, 2 holes are blocked.

Angular-fixed locking screws.

Thread on the full perimeter of the hole for some stabilization. Undemanding blinds/adapters for blocked screws. Thread on the full perimeter of the hole for some stabilization. Undemanding blinds/adapters for blocked screws.

Compression holes with two-way compression.

Possessing at least 2 Kirschner wires for provisional fixing of the tile.

Same colour of tilt-clock-titanium screws for easy identification and selection of implants - 4

2. Plates blocked to the head of the radial bone. Version for radial bone head 20÷22mm diameter and version for radial bone head with a diameter of 24÷26mm. Available in right/left version.

Cervical version, for the head of the radial bone in cervical fractures.

Plate occurring in 1÷3 hole sizes.

In the socket part of 6 interlocked holes with a multidirectional setting.

Angular-fixed locking screws.

Thread on the full perimeter of the hole for some stabilization. Undemanding blinds/adapters for blocked screws. Thread on the full perimeter of the hole for some stabilization. Not requiring blinds/adapters for blocked screws.

Compression holes with two-way compression, elongated for plate positioning.

Having at least 3 holes for Kirchner wires for temporary fixing of the tile

The same color of tiles and blocked-titanium screws to facilitate the identification and selection of implants. - 12

3. Platelet to the ulna further. The plate occurs in three lengths from 45 to 61 mm, in the socket part one hole blocked, in the molar part 3 to 5 holes including min one compression hole. Locked screws are fixed angled. Thread on the full perimeter of the hole for some stabilization. Compression holes with two-way compression, elongated for plate positioning. In the socket part, two hooks facilitate the stabilization of the bone debris. Same color of titanium interlocked wafers and screws for easy identification and selection of implants - 4

4 Titanium screw 2.4mm and 2.7mm - 130

5 Self-ogwin cortical screw. 2.7mm - 28

6 Cobalt screw VA 2.4mm - 70

1. Closer lateral tibial plate - 30

2. Shape plate blocked to the proximal base of the humerus - 10

3. Narrow, straight, compression locked with limited contact - 20

4. Shape plate blocked to the distal root of the tibia - 30

5. Shape plate blocked to the distal root of the tibia - 10

6. Further medial brachial plate - 30

6a. Fragial plate distal posterior medial - 30

6b. Fragial plate distal dorsal lateral - 30

6c. The brachial locking plate is further. External rear side shoulder plate - 30

6d. External lateral brachial plate - 30

7. ulnar locking plate - 10.00

8. Tibial plate closer to T - 30

9a. Clavicular plaques. Shaped plate with hook, blocked to the collarbone - 10

9b. Clavicular plate S. - 10

9c. Shape plate blocked to the molar of the clavicular bone - 10

10. Reconstructive Straight Plate - 10

11. Tibial locking plate proximal posterior - 4

12. External lateral sagittal locking plate - 20

13. Straight tube plate 1/3 - 10

14. Shape plate blocked to calcaneal bone - 4

15. Self-tapping screw locked 3.5mm and 2.4mm - 2000

16. Self-togwin.3.5mm - 500

17. Cobalt screw VA 3.5mm - 300

18th Spongy Screwdriver 3.9mm- 100

Detailed description of the item of the order - Annex No. 2 to SWZ

1. Shape plate blocked to further femur roots - 16

2. Straight plate with interlocked and compression holes - 10

3. Shape plate wide L, blocked to the proximal base of the tibia, assumed from the lateral side - 18

4.The condylar plate of the tibial proximal medial. Assumed from the medial side. Right/left version. - 16

5. Closer femoral locking plate - 4

6. Shaped periprosthetic plate blocked to the proximal femur root - 8

7. Periprosthetic, nut shaped plate blocked to the proximal femur root - 8

8. Self-tapping screw, locked 5.0 mm - 400

9. Self-tapping cortical screw 4.5mm - 120

10. Sponge screw 5.4mm - 120

11. Sponge screw 6.5mm - 80

12 Canniulated screw 7,3mm 40

13 Screws for the cerkler 24

Detailed description of the object of the order-Annex No. 2 to SWZ

1" Radial bone head modular endoprosthesis (stem and head included) Head of modular construction, consisting of a cap made of cobalt alloy, and a polymer insert made of PEEK OPTIMA Wear Performance. Delivered in a complex state (the connection of the cap and insert is inseparable), sterile. Available in 9 size variants: head diameter 20, 22, 24 mm, head height 10, 12, 14 mm.

The head cooperates with the standard and angular stem, on the principle of a spherical joint (diameter of the stem ball Ø6), allowing rotational movements and deviation of the head sideways by an angle of 15o with respect to the axis of the stem (full range of deviation — 30o ).”

1a Head 12

1b mandrel 12

1 Fracture anastomoses in the toe bone, 1.3 mm profile; titanium; cortical and interlocked screws; 2.0 and 2.3 mm bolts; multi-hole, straight, T-shaped, L-shaped, bipolar 6-eyed and trapezoidal. Tiles with holes for cortical screws and lock screws provided with a system of three-point locking to pressure, allowing for the insertion of screws in the angle range +/- 15 degrees. pcs. 15

2 Fracture anastomoses within the finger bones, 1.0 mm profile; titanium; cortical and interlocked screws; 2.0 and 2.3 mm multi-hole, straight, T-shaped, Y, L. Tiles with holes for cortical screws and lock screws provided with a system of three-point locking to pressure, allowing for the insertion of the screw in the angle range +/- 15 degrees. pcs. 5

3 Thread less Titanium screws with a diameter of 2.0mm, length from 6 mm to 30 mm pcs. 50

4 Titanium cortical screws with a diameter of 2.0mm, length from 6 mm to 30 mm pcs. 50

5 Titanium cortical screws with diameter 2.3mm, length 6 mm to 34 mm pcs. 30

6 Titanium tiles locked, straight, Y shape and bipolar 6 mesh with 1,2,3 hole jump. Tiles with unthreaded bolt holes provided with a three-point pressure locking system and allowing for bolt insertion in the +/_ 15 degree angle range. Color coded tiles. Profile 1.6 mm. pcs. 15

7 Cortical screws with a diameter of 2.8 mm and lengths from 8 - 45mm. pcs. 30

8 Three-free locking screws with a diameter of 2.8 mm and lengths from 8 - 45mm. pcs. 30

1 Further lateral tibia plate 3.6 mm thick, plate head thickness 2mm left and right, number of holes from 7 to 19, plate length from 80 to 288 mm. A plate that reduces contact with bone. Material titanium. 5

2 Further medial tibia plate with a thickness of 4mm, plate head thickness of 2.2mm left and right, number of holes 6 to 14, plate length from 117 to 252 mm. A plate that reduces contact with bone. Titanium Material. 15

3 Lateral tibia plate with a thickness of 3.6 mm, plate head thickness of 2mm left and right, number of holes 6 to 14, plate length from 83 to 239 mm. A plate that reduces contact with bone. Titanium Material. 10

4 Closer medial tibia plate 4.2 mm thick, plate head thickness 2.2mm left and right, number of holes from 4 to 8, plate length from 109 to 239 mm. A plate that reduces contact with bone. Material titanium. 5

5 Further sagittal plate with a thickness of 2.5 mm, left and right, number of holes from 3 to 7, plate length from 73 to 125 mm. A plate that reduces contact with bone. Titanium material. 20

6 Straight plate limited contact with a thickness of 3.2mm and a width of 11.5mm, the number of holes from 5 to 12, the length of the tile from 59 to 163mm. Titanium material. 20

7 Self-tapping locking screw 3.5 mm long 10 to 65mm, bolt length change range from 10 to 50mm, every 2 mm, 50 to 65 every 5mm. In addition, 35 and 45mm bolts are available. Titanium Material. 110

8 3.5 mm self-tapping cortical screw with a length of 12 to 50 mm, a range of change in the length of the bolt from 12 to 50mm, every 2mm. Titanium material. 40

9 Closer lateral tibial plate inserted by LISS 4.8 mm thick, left and right, number of holes 5 to 13, plate length 141 to 301 mm, plate width 16mm, plate head width 21.5mm. A plate that reduces contact with bone. Material Titanium 5

10 Further lateral thigh plate blocked by small invasive LISS method 5.5 mm thick, left and right, number of holes 5 to 13, plate length 155 to 315 mm, plate width 16,5mm, plate width 35mm. A plate that reduces contact with bone. Material Titanium 5

11 Self-tapping screw 5.0 mm long 14 to 90mm, bolt length change range from 14 to 50mm, every 2 mm, 50 to 90 every 5mm. In addition, available screws with a length of 35. Titanium material.

12 Titanium self-tapping screw, diameter 2.4 mm, length 8-30 mm, 8-30 every 2 mm.

1). Ablation-coagulatory arthroscopic electrodes, two-button, sterile. Controlled by buttons placed on its enclosure. Available in or without suction. The length of the working part of the electrode 142 mm or 150 mm. The diameter of the tip working 3.2 mm or 4.5 mm (tip bent at an angle of 90degrees). Without suction, ablation 50 — 70 - 140. The tenderer will provide free of charge the ablator/coagulation necessary to use the object of the contract for the duration of the tender agreement.coagulation 30—50. With suction ablation 50 — 200 coagulation 30—50 — 10.2). Multiphase blades for the hospital-owned arthroscopic shaver of Linvatec. Length of the working part of the blade 13 cm, blades packed sterilly, singly in sizes 3.5; 4,2; 4,5; 5,5, color-coded for easier identification, blades not requiring adapters that connect the blade to the shaver's handle, blade ruff provided with quantity indicators and use/ sterilization. pcs. - 150; 3). Sterile, single use single-cassette drains for the Ordering Party's 10K arthroscopic pump. Packed drains of 10 pieces each. Drains equipped with two tips for connecting the drain to the fluid bag, a luer attachment tip and an additional wire used to connect the shaver drain to the active mammal, pcs. - 200; 4). Polyethylene, super strong, surgical thread. Non-absorbable, sterile, single-use, flattened profile, consisting of high-molecular polyethylene. Braided, undyed (white) 40” long complete with a semicircular, conical needle. The thread is packed in boxes in quantities of 12 packed individually (white only) or 12 double-packed (white and white with blue stripe). Package - 300; 5). Sterilically, single-packaged 8 packs reinforced threads equipped with 3 separate meshes for attaching soft tissue sewing threads on the original equipment of arthroscopic implants. Threads with three mesh for use with Spectrum II soft tissue sewing system. pack-150; 6). System for anterior ligament reconstruction based on corticolor fixation using a longitudinal plaque. Two-hole plate made of titanium alloy rectangular with rounded sides 12mm width 3.5mm continuously connected to a loop made of 50mm non-absorbable thread allowing for suspension of the graft in the femoral or tibial duct, and of thread to drag implant for the external cork. Loop to pull up the graft with the ability to reduce its length with the help of reins - fixation of graft in the duct. The possibility of pulling up the graft in the line of the drawn graft. The sterile implant, packaged one at a time, together with a guide wire with an eyelet used to drag the graft through bone ducts, which is a 4.0mm diameter drill and a measuring depth of pcs. -50; 7). Disposable needle for stitching ACL or other tissues within the knee with a sharp tip and an indentation under the tip of the needle allowing safe stitching through thick tissues as well to reduce mechanical damage. Total needle length 230mm, working part length 190mm. Parts 30 Needle compatible with Knee Scorpion Tool

1). Electrode to Edg. Bipolar electrode, 90, 50, 30 degrees, capability to max 30 degrees, working part length 130mm, round, solid plate of active electrode with hole, additionally equipped with three plugs to increase the stability of the plasma created. Ability to cut tissues with the edge of the active electrode plate. The electrode is equipped with a real temperature sensor and three switches: yellow (ablation), blue (coagulation) and gray (changes in ablation level - 80; 2). Biostinger. Biovabsorbable arrows for meniscus repair procedures, sterile, made of poly-L-lactic acid copolymer, introduced using sterile rechargeable tool pcs. 50

1). Modular system dedicated to arthroscopic procedures for sewing the rotator cone. The set includes a multiphase handle compatible with monofilament seams No. 2 sliding through the handle and latchally assembled to the handle of the multiphase used needle - stit-1;

2). Needles bent multiphase use fi1,8: Pc. 7

· straight with a tip with a 30st crease.

· straight with a tip with a 90st crease.

· with a strong crease to the right 45st.

· With a strong crease left 45st.

· with a strong crease to the right 90 st.

· with a strong crease to the right 90st.

· Crescent

3). Nitinyl wire ended with eyelet for use with cannul system for gripping and piercing threads - pc-3

1). Titanium plate for implantation in tibial osteotomy with 6 holes and self-locking attachment, found in left and right versions. Tiles available with support wedges with rear tilt in height sizes from 5mm to 17.5mm and straight support wedges in size/height from 3mm to 17.5mm. Implants packed individually, sterile - pcs. -30; 2). Screw for spongy bone, titanium with low profile, conical head adjusted for locking in osteotomy plate, diameter 6.5mm and length 35mm to 70mm, sterile pcs -120; 3). Cortical bone screw, titanium with low profile, conical head adjusted for locking in the osteotomy plate diameter 4.5mm and length from 26mm to 60mm, sterile - pcs. - 60; 4). Broken wire for procedures for osteotomy, sterile - pcs. - 30.

Plate system for open osteotomy of the proximal epiphysis of the tibia, distal femur epiphysis, lateral and medial sides. Anatomical plate with a shape that reduces contact with bone, lock-compression. On the shaft of the plate are two-function, interlocking and compression holes with the possibility of using a single interlocking screw with a diameter of 5.0mm or cortical diameter of 4.5mm. The corresponding shape of the holes in the plate gives the ability to make compression between the splinter and the longitudinal lock-compression hole allows vertical positioning of the tile. In the head of the plate there are: threaded holes leading screws with a diameter of 5.0mm at different angles — in different directions. The shape of the holes on the shaft of the plate also allows the use of the technique of the pulling screw. Instrumentarium equipped with: AO tip drill bits; AO end screwdriver cartridges for fast AO type drill coupling or 4.0NM dynamometer. Titanium implants made of material allowed for magnetic resonance imaging.

Complete instrumentarium for quick and precise introduction of implants, equipped with a dynamometric screwdriver, osteotomes, bone spenders, wedge-shaped reamer with angle indicator. The implants are made of titanium for greater strength, elasticity, biocompatible and safe for MRI. Different types of plates:

Discs in STERILY and UNESTERILL versions.

— plates for osteotomy of further femoral roots lateral, length 141mm, 4 holes in the shaft and 6 holes in the head plate, right and left plates,

— plates for osteotomy of further femoral roots medial, 4 holes in the shaft and 4 holes in the head plate, right and left plates,

— plates for osteotomy of the proximal epiphysis of the lateral tibia, length 102mm, 3 holes in the shaft and 5 holes in the head plate, right and left plates,

— plates for osteotomy proximal epiphysis of the medial tibia, lengths 115mm and 112mm, 4 holes in the shaft and 4 holes in the head plate, universal plates

25 pcs

Membrane for the treatment of cartilaginous and cartilaginous cavities is a substrate for mesenchymal stem cells of human bone marrow constructed from hyaluronic acid, biodegradation time up to 24 thousand.

Used for the treatment of focal cavities not requiring fixation. Size 2x2cmx2mm pcs 10

Tape for sewing rotator cone 2mm wide and 18 cm long in blue, factory-combined (tapering) with strong thread in size #2 76 cm long. Cm packaged individually sterile or single-sterile in bulk packs 12 pcs. 30

1.Titanium intramedical nails +/-10% for length), 1a “femoral nail, blocked, cannulated, titanium, left and right - 10; 1b El. Blocking -20; 1c.Reconstructive screw -10, 1d.Nip/-10, 1e. Compression screw-10,

2. Condor femoral nail

2a “One universal nail designed for the treatment of femoral fractures used in the retrograde method. A nail with a round section along the entire length. -10, 2b.El. Locking -20, 2c.Locking screw 6.5-10, 2d.Nut -10, 2e. Locking Kit - 10.

3 Tchanter nail

3a “Short - from 180 to 200mm (with pitch every 20mm) with 4 degree deflection, diameter d=10÷11mm (with pitch every 1mm) for the further part, 16 mm for the proximal part. Cervical angle — molar 125o, 130oand 135o, cannulated version, universal to left and right bones. A nail with a round section. Locked in the proximal part with a scanning screw with a diameter of 10.5mm together with a retainer - 70, 3b El. Blocking - 140, 3c. Screw screw 10.5 -70, 3d.Screw of the complex telesk. 10.5 - 10

3e Screw screw 5,0 70

3f Cap 70

3g Retainer Screw 70

3h Compression Bolt 70

4 Tibial intramedullary nail

4a Length L=285-390mm (with stroke every 15mm) diameter d=8-10mm with pitch (co1mm), in cannulated version. 70

4b El. Locking 210

4c Cap 70

4d Compression Bolt 70

5 Tibial intramedullary nail, retrograde

5a Intrameloid nail designed for stable osteosynthesis of tarsal bones and further part of the tibia. 2

5b El. Blocking 6

5c Cap 2

5d Compression Bolt 2

6 Intrameloid brachial, reconstructive, cannulated nail

6a Endolelial nail, universal: one to the right and left limb. 10

6b El. Locking 40

6c Cap 10

6d Compression Bolt 10

7 Endolelial nails system for arthrodesis of the knee joint

7a system of implants for joining the femur and tibia at the site of resection of the knee joint.

7a Thigh Nail 2

7b Tip Nail 2

7c El. Blocking 8

7d Distance 2

7e Bolt 4

Detailed description of the item of the order - Annex No. 2 to SWZ