The subject of this tender is the delivery of a ready-to-use, combined suction and rinsing vehicle with reprocessing.

The body and chassis are put out to tender in separate lots. The separately advertised chassis must be guaranteed for coordination in close consultation for on-time delivery to the manufacturer's plant. This vehicle must be turnkey, i.e. delivered fully roadworthy and road-legal.

The bidder must provide a detailed description of the service offered in accordance with the service items. The bidder must offer his service in such a way that the suction vehicle can be used without restrictions or retrofits or structural changes after acceptance. When building the vehicle, the applicable laws and standards, in particular the accident prevention and safety regulations of the Federal Republic of Germany, as well as the guidelines for EC machines,

safety, pressure equipment, noise measurement, requirements for municipal vehicles suction/flushing vehicles,

Symbols, safety markings and the chassis manufacturer's body guidelines must be observed.

An EC declaration of conformity of the vehicle in accordance with EC Directive Machinery 89/392 EEC Annex IIA must be handed over upon takeover by the customer.

Chassis/cab specifications - 8 x 4 drive

- wheelbase 3600 mm

- Permissible total weight: 32,000 kg

- Front axle: 9,000 kg

- Drive axle 1:9,500 kg

- Drive axle 2:9,500 kg

- Steerable trailing axle: 9,000 kg

- Control module for external data exchange with setup functionality,

- water coolers and charge air coolers,

- external transmission oil cooler with temperature-controlled fan,

- fly screen in front of the cooler,

- speed limiters,

- air intake behind the cab, at the greatest possible distance from the exhaust system,

- exhaust pipe up variable,

- Stainless steel exhaust pipe elbow.

-

-

- Gearboxes:

- automated manual transmission,

-

- NMV: designed for at least 3,000 Nm

-

- translation i = 1.0-1.3

- TÜV acceptance is included in the scope of services

Delivery and installation of 1 combined suction/pressure flushing system with water treatment for hydrodynamic cleaning of sewers,

mounted on a 4-axle truck chassis as described.

1. Cylindrical steel tank with a volume of 13500 l, vacuum and pressure-resistant design with emptying piston for an operating pressure of 0.5 bar.

2. Sludge chamber with externally reinforced emptying flap, large tipping screen, suction and drain connections DN 125 3. Water chamber with DN 500 manhole Filling equipment and lines including gate valves, stop valves and displays.

Water ring vacuum pump (at least 3100 cbm/h) 5. High-pressure system triple high-pressure piston pump (at least 410 l/min at 175 bar) 6. High-pressure reels with flushing hose drive for at least 300 m of DN 32 high-pressure hose.