The subject of the tender is the periodic inspection of the electrical installation up to 1000 V in accordance with DGUV regulation 4 according to DIN VDE 0105-100/A1
The subject of the tender is the periodic inspection of the electrical installation up to 1000 V in accordance with DGUV regulation 4 according to DIN VDE 0105-100/A1
—
The contract includes the following services:
- Creation of a schedule
- Documentation of the tests
-- General Information
-- Evaluation of the exam
-- Condition report of the electrical system
-- Revision
- Prüfarbeiten
-- Visual inspection of the electrical installations in the building
-- Inspection by inspection
--Measure
at the following facilities:
- Distributions = 1,290 units
- FI/LS-2pol. = 2,463 units
- FI-4pol. = 2,087 units
- 1pol. SK = 15,454 units
- 3pol. SK = 2,861 units
- MSS = 20
—
The periodic inspection of the electrical installation is carried out on time and professionally as well as at least, in accordance with the manufacturer's specifications and in accordance with all valid and relevant laws, regulations, standards, guidelines, etc. as well as the recognized rules of technology.
-
In connection with the test, the Contractor is obliged to carry out those repair work that is indispensable for restoring the target state, is not already included in the specifications and does not increase the normally expected time required for the test.
-
Before the start of the work, the contractor must familiarize himself with the conditions on site and be instructed. The approval for the work is given in writing by the BImA plant manager. For this purpose, a person responsible for work must be named in writing by the contractor.
-
The Contractor shall carry out the services in such a way that the safety of the systems is maintained. Operational readiness must be maintained during the provision of services, as far as possible.
All relevant laws, regulations, in particular accident prevention regulations, standards, guidelines, etc., as well as the recognized rules of technology must be observed. The Contractor shall provide the service with its operation. He may transfer parts of the service to subcontractors with the consent of the client.
-
The Contractor is obliged to provide or supply all equipment, tools and aids (e.g. measuring and testing equipment), materials and auxiliary materials (e.g. cleaning, sealing, lubricants and corrosion inhibitors) as well as suitable access technology (e.g. work platforms, ladders, steps) and protective equipment, etc. as well as all other aids and substances not explicitly mentioned. Unless otherwise stated, the costs are covered by the unit prices.
-
The Contractor is obliged to use competent and reliable personnel to perform the contractually agreed services. The staff must have sufficient command of the German language for the provision of the contractual service.
-
The Contractor is obliged to comply with the access regulations of the Client or the User. To access the property, it is mandatory to identify yourself with an identity card. Certain security areas may only be entered if accompanied. If necessary, the accompaniment will be provided by personnel on site.
—
Further information can be found in the contract, the enclosed annexes and the specifications.