1.The subject of the order is the delivery of laboratory equipment for the Faculty of Electronics, Telecommunications and Informatics of the Gdańsk University of Technology.
2.The subject of the order must be factory new, complete with a high standard both in terms of quality and functionality, free of material and design defects, without prior operation and cannot be subject to third party rights.
3.The subject of the order includes delivery to the contracting office: Gdańsk University of Technology, Electronics, Telecommunications and Informatics Department, Narutowicza Street 11/12, 80-233 Gdańsk, WETI A building (No. 41), Room 126.
4.Specific requirements are set out in the description of the object of the contract constituting Annex No 4 to the SWZ.
5.The Contractor shall fulfil the order under the terms and conditions described in the template of the contract constituting Annex 3 to the SWZ.
6.The Contracting Authority does not require the provision of a security for the proper performance of the contract
Delivery of mobile digital multimeters for the project “Software defined, universal radio interface of smart devices of the Internet of Things”, contract no POIR.01.01.01-00-1025/19-01.The subject of the order is the delivery of 2 pcs of the digital multimeter and 1 pcs of the IP67 digital multimeter, for which the detailed requirements are specified in the description of the item of the order, constituting Annex No 4 to the SWZ.
2.The subject of the order must be factory new, complete with a high standard both in terms of quality and functionality, free of material and design defects, without prior operation and cannot be subject to third party rights.
3.The offer submitted by the Contractor shall be unambiguous and comprehensive, i.e. cover the entire subject matter of this contract together with the necessary components of the hardware infrastructure. In order to achieve all the intended objectives and requirements set by the Contracting Authority in particular in Subject Description 4.The Order, the subject of the contract offered by the Contractor must be complete with all the components, parts and materials necessary for commissioning and use. The offered object of the contract must comply with all the requirements of the Contracting Authority. The delivered item of the order after commissioning must be ready to work as intended and designated by the Ordering Party, without additional investment purchases on the side of the Ordering Party. The Contractor at the stage of execution of the contract shall carry out the object of the contract in accordance with the requirements of the
5.The Contractor shall fulfil the order under the terms and conditions described in the template of the contract constituting Annex 3 to the SWZ.
6.The Contractor shall be obliged to explicitly specify the equipment offered, characterising them by identifying, among others, the type, model, manufacturer's name in the fact-to-price form, constituting Annexes No 2I to SWZ respectively. The in-kind and price form constitutes the content of the offer.
7.The Contracting Authority shall request the submission with the offer of the following evidence measures in question to confirm the conformity of the supply offered with the requirements/characteristics specified in the description of the subject of the contract:
current at the date of submission of tenders a description of the offered item of the order, i.e. manufacturer's catalogue cards, manufacturer/distributor folders, prints from the manufacturer/distributor's websites or own descriptions. The description should confirm all the requirements for the subject of the order specified in the SWZ. The Contracting Authority allows submission of a description in English.
8.The Contracting Authority shall accept equivalent measures of evidence in question if they confirm that the deliveries offered meet the requirements, characteristics or criteria laid down by the Contracting Authority.
9.If the contractor does not submit the means of evidence in question or the evidence submitted is incomplete, the contracting officer will call them to submit or supplement them within the time limit set, in accordance with Article 107 (2) of the Pzp Act.
10.In accordance with Article 139 of the Pzp Act, the Contracting Authority provides for a reversed order of activities, i.e. he may first examine and evaluate tenders, and then make the qualification of the contractor whose offer has been highest rated, in the absence of grounds for exclusion and compliance with the conditions participation in the proceedings.
Supply of mobile digital multimeters for the project “Electricity data concentrator with innovative decision-making functionality, braby functionality and functionality1.The subject of the order is the delivery of 4 pieces of digital multimeters, for which the detailed requirements are specified in the description of the item of the order, constituting Annex No 4 to the SWZ.
2.The subject of the order must be factory new, complete with a high standard both in terms of quality and functionality, free of material and design defects, without prior operation and cannot be subject to third party rights.
3.The offer submitted by the Contractor shall be unambiguous and comprehensive, i.e. cover the entire subject matter of this contract together with the necessary components of the hardware infrastructure. In order to achieve all the intended objectives and requirements set by the Contracting Authority in particular in Subject Description 4.The Order, the subject of the contract offered by the Contractor must be complete with all the components, parts and materials necessary for commissioning and use. The offered object of the contract must comply with all the requirements of the Contracting Authority. The delivered item of the order after commissioning must be ready to work as intended and designated by the Ordering Party, without additional investment purchases on the side of the Ordering Party. The Contractor at the stage of execution of the contract shall carry out the object of the contract in accordance with the requirements of the
5.The Contractor shall fulfil the order under the terms and conditions described in the template of the contract constituting Annex 3 to the SWZ.
6.The Contractor shall be obliged to explicitly specify the equipment offered, characterising them by indicating, among others, the type, model, manufacturer's name in the fact-to-price form, constituting Annexes No 2II to SWZ respectively. The in-kind and price form constitutes the content of the offer.
7.The Contracting Authority shall request the submission with the offer of the following evidence measures in question to confirm the conformity of the supply offered with the requirements/characteristics specified in the description of the subject of the contract:
current at the date of submission of tenders a description of the offered item of the order, i.e. manufacturer's catalogue cards, manufacturer/distributor folders, prints from the manufacturer/distributor's websites or own descriptions. The description should confirm all the requirements for the subject of the order specified in the SWZ. The Contracting Authority allows submission of a description in English.
8.The Contracting Authority shall accept equivalent measures of evidence in question if they confirm that the deliveries offered meet the requirements, characteristics or criteria laid down by the Contracting Authority.
9.If the contractor does not submit the means of evidence in question or the evidence submitted is incomplete, the contracting officer will call them to submit or supplement them within the time limit set, in accordance with Article 107 (2) of the Pzp Act.
10.In accordance with Article 139 of the Pzp Act, the Contracting Authority provides for a reversed order of activities, i.e. he may first examine and evaluate tenders, and then make the qualification of the contractor whose offer has been highest rated, in the absence of grounds for exclusion and compliance with the conditions participation in the proceedings.
Full name Part 2 - Part 2 — Supply of portable digital multimeters for project “Electricity data concentrator with innovative decision functionality, gateway functionality and multilink functionality, working in the environment and on the edge of AMI, SCADA, HAN, IoT” Agreement No POIR.01.01.01-00-0651/19-00
Delivery of the measuring source for KSME1.The subject of the order is the delivery of 1 piece of the measuring source, for which the detailed requirements are specified in the description of the subject of the contract, constituting Annex No 4 to the SWZ.
2.The subject of the order must be factory new, complete with a high standard both in terms of quality and functionality, free of material and design defects, without prior operation and cannot be subject to third party rights.
3.The offer submitted by the Contractor shall be unambiguous and comprehensive, i.e. cover the entire subject matter of this contract together with the necessary components of the hardware infrastructure. In order to achieve all the intended objectives and requirements set by the Contracting Authority in particular in Subject Description 4.The Order, the subject of the contract offered by the Contractor must be complete with all the components, parts and materials necessary for commissioning and use. The offered object of the contract must comply with all the requirements of the Contracting Authority. The delivered item of the order after commissioning must be ready to work as intended and designated by the Ordering Party, without additional investment purchases on the side of the Ordering Party. The Contractor at the stage of execution of the contract shall carry out the object of the contract in accordance with the requirements of the
5.The Contractor shall fulfil the order under the terms and conditions described in the template of the contract constituting Annex 3 to the SWZ.
6.The Contractor shall be obliged to explicitly specify the equipment offered, characterising them by indicating, among others, the type, model, manufacturer's name in the fact-to-price form, constituting Annexes No 2III to SWZ respectively. The in-kind and price form constitutes the content of the offer.
7.The Contracting Authority shall request the submission with the offer of the following evidence measures in question to confirm the conformity of the supply offered with the requirements/characteristics specified in the description of the subject of the contract:
current at the date of submission of tenders a description of the offered item of the order, i.e. manufacturer's catalogue cards, manufacturer/distributor folders, prints from the manufacturer/distributor's websites or own descriptions. The description should confirm all the requirements for the subject of the order specified in the SWZ. The Contracting Authority allows submission of a description in English.
8.The Contracting Authority shall accept equivalent measures of evidence in question if they confirm that the deliveries offered meet the requirements, characteristics or criteria laid down by the Contracting Authority.
9.If the contractor does not submit the means of evidence in question or the evidence submitted is incomplete, the contracting officer will call them to submit or supplement them within the time limit set, in accordance with Article 107 (2) of the Pzp Act.
10.In accordance with Article 139 of the Pzp Act, the Contracting Authority provides for a reversed order of activities, i.e. he may first examine and evaluate tenders, and then make the qualification of the contractor whose offer has been highest rated, in the absence of grounds for exclusion and compliance with the conditions participation in the proceedings.
Supply of universal prototype and measurement kit for electronic and integrated circuits for KSME.1.The subject of the order is the delivery of a universal prototype and measurement kit for electronic and integrated circuits for KSME, for which the detailed requirements are specified in the description of the item of the order, which is Annex 4 to the SWZ.
2.The subject of the order must be factory new, complete with a high standard both in terms of quality and functionality, free of material and design defects, without prior operation and cannot be subject to third party rights.
3.The offer submitted by the Contractor shall be unambiguous and comprehensive, i.e. cover the entire subject matter of this contract together with the necessary components of the hardware infrastructure. In order to achieve all the intended objectives and requirements set by the Contracting Authority in particular in Subject Description 4.The Order, the subject of the contract offered by the Contractor must be complete with all the components, parts and materials necessary for commissioning and use. The offered object of the contract must comply with all the requirements of the Contracting Authority. The delivered item of the order after commissioning must be ready to work as intended and designated by the Ordering Party, without additional investment purchases on the side of the Ordering Party. The Contractor at the stage of execution of the contract shall carry out the object of the contract in accordance with the requirements of the
5.The Contractor shall fulfil the order under the terms and conditions described in the template of the contract constituting Annex 3 to the SWZ.
6.The Contractor shall be obliged to explicitly specify the equipment offered, characterising them by indicating, among others, the type, model, manufacturer's name in the fact-to-price form, constituting Annexes 2IV to SWZ respectively. The in-kind and price form constitutes the content of the offer.
7.The Contracting Authority shall request the submission with the offer of the following evidence measures in question to confirm the conformity of the supply offered with the requirements/characteristics specified in the description of the subject of the contract:
current at the date of submission of tenders a description of the offered item of the order, i.e. manufacturer's catalogue cards, manufacturer/distributor folders, prints from the manufacturer/distributor's websites or own descriptions. The description should confirm all the requirements for the subject of the order specified in the SWZ. The Contracting Authority allows submission of a description in English.
8.The Contracting Authority shall accept equivalent measures of evidence in question if they confirm that the deliveries offered meet the requirements, characteristics or criteria laid down by the Contracting Authority.
9.If the contractor does not submit the means of evidence in question or the evidence submitted is incomplete, the contracting officer will call them to submit or supplement them within the time limit set, in accordance with Article 107 (2) of the Pzp Act.
10.In accordance with Article 139 of the Pzp Act, the Contracting Authority provides for a reversed order of activities, i.e. he may first examine and evaluate tenders, and then make the qualification of the contractor whose offer has been highest rated, in the absence of grounds for exclusion and compliance with the conditions participation in the proceedings.