- Multi-purpose implement carrier with municipal hydraulics
- Motor power at least 200 KW
- Device drive via front PTO and municipal hydraulics
- Interchangeable steering is not required.
- Installation and operation of front and rear-mounted devices
- The front axle load and payload must be suitable for accommodating an attachment spreader with at least 3.0 m3 of dry spreading material / 1290 litres of brine or a trailed spreader and a front snow plough (approx. 1.1 t / front attachment), as well as in individual cases a barrel spreader (up to approx. 1.1 t / front attachment) instead of a front snow plough in the winter period? see Appendix 1 to the execution description
In summer use, the existing mowing combination is to be operated. A torsion frame for load balancing shall be planned if required.
- Hydraulic connections for the 2nd circuit with screw couplings
- In the driver's cab, 1 x 12 volt socket and 2 x 24 volt sockets are required as well as standardised interfaces for attachments (UES 6)
- Multi-purpose implement carrier with municipal hydraulics
- Motor power at least 200 KW
- Device drive via front PTO and municipal hydraulics
- Interchangeable steering is not required.
- Installation and operation of front and rear-mounted devices
- The front axle load and payload must be suitable for accommodating an attachment spreader with at least 3.0 m3 of dry spreading material / 1290 litres of brine or a trailed spreader and a front snow plough (approx. 1.1 t / front attachment), as well as in individual cases a barrel spreader (up to approx. 1.1 t / front attachment) instead of a front snow plough in the winter period? see Appendix 1 to the execution description
In summer use, the existing mowing combination is to be operated. A torsion frame for load balancing shall be planned if required.
- Hydraulic connections for the 2nd circuit with screw couplings
- In the driver's cab, 1 x 12 volt socket and 2 x 24 volt sockets are required as well as standardised interfaces for attachments (UES 6)