The subject of the contract shall be the collection, transport and management, in the process of recovery or recycling, of waste code 19 12 12 — Other waste (including mixed substances and objects) from mechanical waste treatment other than those listed in 19 12 11

The subject of the order describes Annex 7 to the SWZ.

The subject of the order shall be the collection, transport. and management, in the process of recovery or recycling, of waste code 19 12 12 — Other waste (including mixed substances and objects) from mechanical waste treatment other than those listed in 19 12 11. Waste prepared for collection will be in the form of compressed cube, the dimensions of the bale are approx: 110 x 115 x 75 cm. The average weight of one bale of waste is approx. 350-500 kg. The amount of waste to be transferred to the Contractor during the term of the contract will be a maximum of 400 Mg. Waste generated by manual segregation and automatic oversieve fraction > 80 mm (magnetic and optopneumatic separator) from unsegregated municipal waste (code 20 03 01), packaging waste (group 15). In the waste code 19 12 12 can contain inclusions in the form of waste paper, plastics, ferrous and non-ferrous metals, glass, wood, biowaste, textiles. Reception of waste will take place from Monday to Friday from 7.00 to 17.00 in the quantity specified by the contracting Party, sent by email or by telephone to the Contractor's representative. Waste stored in the square, without roofing. Amount of waste to be picked up will be reported at least one day in advance. The daily minimum amount of waste ready for transfer is about 40 Mg, the maximum amount of waste will not exceed 150 Mg. The Contracting Authority reserves the option by prior agreement with the Contractor, indicate other dates and hours of receipt. Reception of waste will take place from the Regional Zakładu Zagospodarowania Odpadów Sp. z o.o. Staroprzygodzka 121, 63 - 400 Ostrów Wielkopolski Street. The waste loading lies on the side of the Contracting Authority. Weighing of waste received by the contractor will take place on the legalized weight of the Ordering Party located in the Contracting Authority and will be confirmed by the WZ document. The amount of waste received will be confirmed each time in the BDO system by means of Waste Transfer Cards. These documents shall be the sole basis for determining the quantity of waste received between the Contracting Authority and the Contractor. The specific scope of the Contractor's rights and obligations is governed by the Draft Agreement The Ordering Party does not have current laboratory tests w/w of waste.

The subject of the order is the collection, transport and management in the recovery or recycling process of waste code 19 12 12 — other waste (including mixed substances and objects) from mechanical waste treatment other than those listed in 19 12 11. Waste prepared for collection will be in loose form . The amount of waste to be transferred to the Contractor during the term of the contract will be a maximum of 1 000 Mg. Waste generated by manual segregation and automatic oversieve fraction > 80 mm (magnetic and optopneumatic separator) from unsegregated municipal waste (code 20 03 01), packaging waste (group 15). In the waste code 19 12 12 there will be inclusions in the form of waste paper, plastics, ferrous and non-ferrous metals, glass, wood, biowaste, textiles. Reception of the waste will take place from Monday to Friday from 7.00 to 17.00 in the quantity specified by the contracting authority, sent by email or by telephone to the representative of the contractor. Waste stored in the square, without roofing. Amount of waste to be picked up will be reported at least one day in advance. The daily minimum amount of waste ready to transfer is about 40 Mg, the maximum amount of waste will not exceed 250 Mg. The Contracting Authority reserves the option by prior agreement with the Contractor, indicate other dates and hours of receipt. Reception of waste will take place from the Regional Zakładu Zagospodarowania Odpadów Sp. z o.o. Staroprzygodzka 121, 63 - 400 Ostrów Wielkopolski Street. The waste loading lies on the side of the Contracting Authority. Weighing of waste received by the contractor will take place on the legalized weight of the Ordering Party located in the Contracting Authority and will be confirmed by the WZ document. The amount of waste received will be confirmed each time in the BDO system by means of Waste Transfer Cards. These documents shall be the sole basis for determining the quantity of waste received between the Contracting Authority and the Contractor. The specific scope of the Contractor's rights and obligations is governed by the Draft Agreement The Ordering Party does not have current laboratory tests w/w of waste.

- The bulk density of waste as of 09.02/2021 year is: 234 kg/m3.

The subject of the order shall be the collection, transport. and management, in the process of recovery or recycling, of waste code 19 12 12 — Other waste (including mixed substances and objects) from mechanical waste treatment other than those listed in 19 12 11. Waste prepared for collection will be in the form of compressed cube, the dimensions of the bale are approx: 110 x 115 x 75 cm. The average weight of one bale of waste is approx. 350-500 kg. The amount of waste to be transferred to the Contractor during the term of the contract will be a maximum of 400 Mg. Waste generated by manual segregation and automatic oversieve fraction > 80 mm (magnetic and optopneumatic separator) from unsegregated municipal waste (code 20 03 01), packaging waste (group 15). In the waste code 19 12 12 can contain inclusions in the form of waste paper, plastics, ferrous and non-ferrous metals, glass, wood, biowaste, textiles. Reception of waste will take place from Monday to Friday from 7.00 to 17.00 in the quantity specified by the contracting Party, sent by email or by telephone to the Contractor's representative. Waste stored in the square, without roofing. Amount of waste to be picked up will be reported at least one day in advance. The daily minimum amount of waste ready for transfer is about 40 Mg, the maximum amount of waste will not exceed 150 Mg. The Contracting Authority reserves the option by prior agreement with the Contractor, indicate other dates and hours of receipt. Reception of waste will take place from the Regional Zakładu Zagospodarowania Odpadów Sp. z o.o. Staroprzygodzka 121, 63 - 400 Ostrów Wielkopolski Street. The waste loading lies on the side of the Contracting Authority. Weighing of waste received by the contractor will take place on the legalized weight of the Ordering Party located in the Contracting Authority and will be confirmed by the WZ document. The amount of waste received will be confirmed each time in the BDO system by means of Waste Transfer Cards. These documents shall be the sole basis for determining the quantity of waste received between the Contracting Authority and the Contractor. The specific scope of the Contractor's rights and obligations is governed by the Draft Agreement The Ordering Party does not have current laboratory tests w/w of waste.

The subject of the order shall be the collection, transport. and management, in the process of recovery or recycling, of waste code 19 12 12 — Other waste (including mixed substances and objects) from mechanical waste treatment other than those listed in 19 12 11. Waste prepared for collection will be in the form of compressed cube, the dimensions of the bale are approx: 110 x 115 x 75 cm. The average weight of one bale of waste is approx. 350-500 kg. The amount of waste to be transferred to the Contractor during the term of the contract will be a maximum of 400 Mg. Waste generated by manual segregation and automatic oversieve fraction > 80 mm (magnetic and optopneumatic separator) from unsegregated municipal waste (code 20 03 01), packaging waste (group 15). In the waste code 19 12 12 can contain inclusions in the form of waste paper, plastics, ferrous and non-ferrous metals, glass, wood, biowaste, textiles. Reception of waste will take place from Monday to Friday from 7.00 to 17.00 in the quantity specified by the contracting Party, sent by email or by telephone to the Contractor's representative. Waste stored in the square, without roofing. Amount of waste to be picked up will be reported at least one day in advance. The daily minimum amount of waste ready for transfer is about 40 Mg, the maximum amount of waste will not exceed 150 Mg. The Contracting Authority reserves the option by prior agreement with the Contractor, indicate other dates and hours of receipt. Reception of waste will take place from the Regional Zakładu Zagospodarowania Odpadów Sp. z o.o. Staroprzygodzka 121, 63 - 400 Ostrów Wielkopolski Street. The waste loading lies on the side of the Contracting Authority. Weighing of waste received by the contractor will take place on the legalized weight of the Ordering Party located in the Contracting Authority and will be confirmed by the WZ document. The amount of waste received will be confirmed each time in the BDO system by means of Waste Transfer Cards. These documents shall be the sole basis for determining the quantity of waste received between the Contracting Authority and the Contractor. The specific scope of the Contractor's rights and obligations is governed by the Draft Agreement The Ordering Party does not have current laboratory tests w/w of waste.

The subject of the order shall be the collection, transport. and management, in the process of recovery or recycling, of waste code 19 12 12 — Other waste (including mixed substances and objects) from mechanical waste treatment other than those listed in 19 12 11. Waste prepared for collection will be in the form of compressed cube, the dimensions of the bale are approx: 110 x 115 x 75 cm. The average weight of one bale of waste is approx. 350-500 kg. The amount of waste to be transferred to the Contractor during the term of the contract will be a maximum of 400 Mg. Waste generated by manual segregation and automatic oversieve fraction > 80 mm (magnetic and optopneumatic separator) from unsegregated municipal waste (code 20 03 01), packaging waste (group 15). In the waste code 19 12 12 can contain inclusions in the form of waste paper, plastics, ferrous and non-ferrous metals, glass, wood, biowaste, textiles. Reception of waste will take place from Monday to Friday from 7.00 to 17.00 in the quantity specified by the contracting Party, sent by email or by telephone to the Contractor's representative. Waste stored in the square, without roofing. Amount of waste to be picked up will be reported at least one day in advance. The daily minimum amount of waste ready for transfer is about 40 Mg, the maximum amount of waste will not exceed 150 Mg. The Contracting Authority reserves the option by prior agreement with the Contractor, indicate other dates and hours of receipt. Reception of waste will take place from the Regional Zakładu Zagospodarowania Odpadów Sp. z o.o. Staroprzygodzka 121, 63 - 400 Ostrów Wielkopolski Street. The waste loading lies on the side of the Contracting Authority. Weighing of waste received by the contractor will take place on the legalized weight of the Ordering Party located in the Contracting Authority and will be confirmed by the WZ document. The amount of waste received will be confirmed each time in the BDO system by means of Waste Transfer Cards. These documents shall be the sole basis for determining the quantity of waste received between the Contracting Authority and the Contractor. The specific scope of the Contractor's rights and obligations is governed by the Draft Agreement The Ordering Party does not have current laboratory tests w/w of waste.

The subject of the order shall be the collection, transport. and management, in the process of recovery or recycling, of waste code 19 12 12 — Other waste (including mixed substances and objects) from mechanical waste treatment other than those listed in 19 12 11. Waste prepared for collection will be in the form of compressed cube, the dimensions of the bale are approx: 110 x 115 x 75 cm. The average weight of one bale of waste is approx. 350-500 kg. The amount of waste to be transferred to the Contractor during the term of the contract will be a maximum of 400 Mg. Waste generated by manual segregation and automatic oversieve fraction > 80 mm (magnetic and optopneumatic separator) from unsegregated municipal waste (code 20 03 01), packaging waste (group 15). In the waste code 19 12 12 can contain inclusions in the form of waste paper, plastics, ferrous and non-ferrous metals, glass, wood, biowaste, textiles. Reception of waste will take place from Monday to Friday from 7.00 to 17.00 in the quantity specified by the contracting Party, sent by email or by telephone to the Contractor's representative. Waste stored in the square, without roofing. Amount of waste to be picked up will be reported at least one day in advance. The daily minimum amount of waste ready for transfer is about 40 Mg, the maximum amount of waste will not exceed 150 Mg. The Contracting Authority reserves the option by prior agreement with the Contractor, indicate other dates and hours of receipt. Reception of waste will take place from the Regional Zakładu Zagospodarowania Odpadów Sp. z o.o. Staroprzygodzka 121, 63 - 400 Ostrów Wielkopolski Street. The waste loading lies on the side of the Contracting Authority. Weighing of waste received by the contractor will take place on the legalized weight of the Ordering Party located in the Contracting Authority and will be confirmed by the WZ document. The amount of waste received will be confirmed each time in the BDO system by means of Waste Transfer Cards. These documents shall be the sole basis for determining the quantity of waste received between the Contracting Authority and the Contractor. The specific scope of the Contractor's rights and obligations is governed by the Draft Agreement The Ordering Party does not have current laboratory tests w/w of waste.

The subject of the order is the collection, transport and management in the recovery or recycling process of waste code 19 12 12 — other waste (including mixed substances and objects) from mechanical waste treatment other than those listed in 19 12 11. Waste prepared for collection will be in loose form . The amount of waste to be transferred to the Contractor during the term of the contract will be a maximum of 1 000 Mg. Waste generated by manual segregation and automatic oversieve fraction > 80 mm (magnetic and optopneumatic separator) from unsegregated municipal waste (code 20 03 01), packaging waste (group 15). In the waste code 19 12 12 there will be inclusions in the form of waste paper, plastics, ferrous and non-ferrous metals, glass, wood, biowaste, textiles. Reception of the waste will take place from Monday to Friday from 7.00 to 17.00 in the quantity specified by the contracting authority, sent by email or by telephone to the representative of the contractor. Waste stored in the square, without roofing. Amount of waste to be picked up will be reported at least one day in advance. The daily minimum amount of waste ready to transfer is about 40 Mg, the maximum amount of waste will not exceed 250 Mg. The Contracting Authority reserves the option by prior agreement with the Contractor, indicate other dates and hours of receipt. Reception of waste will take place from the Regional Zakładu Zagospodarowania Odpadów Sp. z o.o. Staroprzygodzka 121, 63 - 400 Ostrów Wielkopolski Street. The waste loading lies on the side of the Contracting Authority. Weighing of waste received by the contractor will take place on the legalized weight of the Ordering Party located in the Contracting Authority and will be confirmed by the WZ document. The amount of waste received will be confirmed each time in the BDO system by means of Waste Transfer Cards. These documents shall be the sole basis for determining the quantity of waste received between the Contracting Authority and the Contractor. The specific scope of the Contractor's rights and obligations is governed by the Draft Agreement The Ordering Party does not have current laboratory tests w/w of waste.

- The bulk density of waste as of 09.02/2021 year is: 234 kg/m3.

The subject of the order is the collection, transport and management in the recovery or recycling process of waste code 19 12 12 — other waste (including mixed substances and objects) from mechanical waste treatment other than those listed in 19 12 11. Waste prepared for collection will be in loose form . The amount of waste to be transferred to the Contractor during the term of the contract will be a maximum of 1 000 Mg. Waste generated by manual segregation and automatic oversieve fraction > 80 mm (magnetic and optopneumatic separator) from unsegregated municipal waste (code 20 03 01), packaging waste (group 15). In the waste code 19 12 12 there will be inclusions in the form of waste paper, plastics, ferrous and non-ferrous metals, glass, wood, biowaste, textiles. Reception of the waste will take place from Monday to Friday from 7.00 to 17.00 in the quantity specified by the contracting authority, sent by email or by telephone to the representative of the contractor. Waste stored in the square, without roofing. Amount of waste to be picked up will be reported at least one day in advance. The daily minimum amount of waste ready to transfer is about 40 Mg, the maximum amount of waste will not exceed 250 Mg. The Contracting Authority reserves the option by prior agreement with the Contractor, indicate other dates and hours of receipt. Reception of waste will take place from the Regional Zakładu Zagospodarowania Odpadów Sp. z o.o. Staroprzygodzka 121, 63 - 400 Ostrów Wielkopolski Street. The waste loading lies on the side of the Contracting Authority. Weighing of waste received by the contractor will take place on the legalized weight of the Ordering Party located in the Contracting Authority and will be confirmed by the WZ document. The amount of waste received will be confirmed each time in the BDO system by means of Waste Transfer Cards. These documents shall be the sole basis for determining the quantity of waste received between the Contracting Authority and the Contractor. The specific scope of the Contractor's rights and obligations is governed by the Draft Agreement The Ordering Party does not have current laboratory tests w/w of waste.

- The bulk density of waste as of 09.02/2021 year is: 234 kg/m3.

The subject of the order is the collection, transport and management in the recovery or recycling process of waste code 19 12 12 — other waste (including mixed substances and objects) from mechanical waste treatment other than those listed in 19 12 11. Waste prepared for collection will be in loose form . The amount of waste to be transferred to the Contractor during the term of the contract will be a maximum of 1 000 Mg. Waste generated by manual segregation and automatic oversieve fraction > 80 mm (magnetic and optopneumatic separator) from unsegregated municipal waste (code 20 03 01), packaging waste (group 15). In the waste code 19 12 12 there will be inclusions in the form of waste paper, plastics, ferrous and non-ferrous metals, glass, wood, biowaste, textiles. Reception of the waste will take place from Monday to Friday from 7.00 to 17.00 in the quantity specified by the contracting authority, sent by email or by telephone to the representative of the contractor. Waste stored in the square, without roofing. Amount of waste to be picked up will be reported at least one day in advance. The daily minimum amount of waste ready to transfer is about 40 Mg, the maximum amount of waste will not exceed 250 Mg. The Contracting Authority reserves the option by prior agreement with the Contractor, indicate other dates and hours of receipt. Reception of waste will take place from the Regional Zakładu Zagospodarowania Odpadów Sp. z o.o. Staroprzygodzka 121, 63 - 400 Ostrów Wielkopolski Street. The waste loading lies on the side of the Contracting Authority. Weighing of waste received by the contractor will take place on the legalized weight of the Ordering Party located in the Contracting Authority and will be confirmed by the WZ document. The amount of waste received will be confirmed each time in the BDO system by means of Waste Transfer Cards. These documents shall be the sole basis for determining the quantity of waste received between the Contracting Authority and the Contractor. The specific scope of the Contractor's rights and obligations is governed by the Draft Agreement The Ordering Party does not have current laboratory tests w/w of waste.

- The bulk density of waste as of 09.02/2021 year is: 234 kg/m3.

The subject of the order is the collection, transport and management in the recovery or recycling process of waste code 19 12 12 — other waste (including mixed substances and objects) from mechanical waste treatment other than those listed in 19 12 11. Waste prepared for collection will be in loose form . The amount of waste to be transferred to the Contractor during the term of the contract will be a maximum of 1 000 Mg. Waste generated by manual segregation and automatic oversieve fraction > 80 mm (magnetic and optopneumatic separator) from unsegregated municipal waste (code 20 03 01), packaging waste (group 15). In the waste code 19 12 12 there will be inclusions in the form of waste paper, plastics, ferrous and non-ferrous metals, glass, wood, biowaste, textiles. Reception of the waste will take place from Monday to Friday from 7.00 to 17.00 in the quantity specified by the contracting authority, sent by email or by telephone to the representative of the contractor. Waste stored in the square, without roofing. Amount of waste to be picked up will be reported at least one day in advance. The daily minimum amount of waste ready to transfer is about 40 Mg, the maximum amount of waste will not exceed 250 Mg. The Contracting Authority reserves the option by prior agreement with the Contractor, indicate other dates and hours of receipt. Reception of waste will take place from the Regional Zakładu Zagospodarowania Odpadów Sp. z o.o. Staroprzygodzka 121, 63 - 400 Ostrów Wielkopolski Street. The waste loading lies on the side of the Contracting Authority. Weighing of waste received by the contractor will take place on the legalized weight of the Ordering Party located in the Contracting Authority and will be confirmed by the WZ document. The amount of waste received will be confirmed each time in the BDO system by means of Waste Transfer Cards. These documents shall be the sole basis for determining the quantity of waste received between the Contracting Authority and the Contractor. The specific scope of the Contractor's rights and obligations is governed by the Draft Agreement The Ordering Party does not have current laboratory tests w/w of waste.

- The bulk density of waste as of 09.02/2021 year is: 234 kg/m3.