1. The subject of the contract is the supply of CBRN equipment under the project "Development and maintenance of rescEU CBRN stockpiles in Poland". The subject of the contract has been divided into nine Parts.

2. A detailed description of the subject matter of the contract, in particular the specification of the technical and functional parameters of the subject matter of the contract, with a detailed division into Parts, constitutes Appendix No. 1 to the Terms of Reference – "Description of the subject matter of the contract".

3. The terms and conditions of performance of the subject matter of the contract, individually for each of the Parts of the Contract, are specified in Appendices No. 2A – 2I to the Terms of Reference – "Draft Contractual Provisions".

1. As part of Part 1 of the contract, the Contractor will be obliged to deliver 20 combat gas detectors – ion mobility spectrometers, in accordance with the technical specification specified in Appendix No. 1 to the Terms of Reference – "Description of the subject of the contract".

2. Regardless of the service consisting in the delivery of the equipment referred to in paragraph 1 above, the Contractor shall also be obliged to:

A. conduct a one-day training in the field of operation, maintenance and use of the delivered equipment for not less than 6 and not more than 9 employees of the Ordering Party or other persons designated by the Ordering Party,

B. permanent and visible marking of each package of each of the devices with the logo of the European Union flag together with a statement on the method of financing: "Funded by the European Union", the template of which is Appendix No. 1A to the Terms of Use – "Model logotype", subject to:

a. dimensions of the EU flag – the dimensions of the EU flag may not be smaller than:

10.5 cm (height) x 16 cm (width), with an appropriately visible statement on the method of financing,

1 cm (height), with a suitably visible statement on the method of financing – for packaging with dimensions less than or equal to 21 cm x 29.7 cm,

b. the necessity to maintain the proportions of the logotype and the statement on the method of financing in relation to each other,

c. the necessity to maintain the proportions of the logotype and the statement on the method of financing in relation to the packaging – clear visibility of the marking,

d. the necessity to maintain the colour scheme of the logotype and the statement on the method of financing (compliance with the template),

e. The Contracting Authority allows the packaging of the CBRN device to be marked with stickers, stickers and similar materials, if they ensure a permanent bond with the packaging of the device,

f. The Ordering Party allows labelling of the collective packaging of devices only if the equipment in question is packaged by the manufacturer, i.e. when the device packed in unit packaging is usually transported in a collective packaging. In particular, the Contracting Authority does not allow the combination of unit packages into collective packages or collective packages customarily packaged by the manufacturer, into larger collective packages (packages "packaged" by the Contractor) in order to avoid the obligation of the Contractor to mark each unit and/or collective packaging of the device,

C. providing the Contracting Authority with a quality guarantee for the delivered equipment at least until 31 December 2026, under which the Contractor will be obliged to:

a. removal of defects and defects of the device,

b. carry out or ensure periodic inspections of the device or its individual components, as required and/or recommended by the manufacturer of the device, including to ensure ongoing (during the period of operation) and/or periodic (in particular during or as a result of periodic inspection) replacement and/or replenishment of consumables and/or replacement parts,

at the sole expense of the Contractor and under the conditions set out in Appendix 2 to the Terms of Use – "Draft Contractual Provisions".

3. A detailed description of the subject matter of the contract, in particular the specification of the technical and functional parameters of the subject matter of the contract, with a detailed division into Parts, is attached as Appendix No. 1 to the Terms of Reference – "Description of the subject matter of the contract".

4. The terms and conditions of the performance of the subject matter of the contract are set out in Appendix No. 2A to the Terms of Reference – "Draft Contractual Provisions".

1. As part of Lot 2 of the contract, the Contractor will be obliged to deliver a handheld FTIR spectrometer, in the amount of 20 units, in accordance with the technical specification specified in Appendix No. 1 to the Terms of Reference – "Description of the subject of the contract".

2. Regardless of the service consisting in the delivery of the equipment referred to in paragraph 1 above, the Contractor shall also be obliged to:

A. conduct a one-day training in the field of operation, maintenance and use of the delivered equipment for not less than 6 and not more than 9 employees of the Ordering Party or other persons designated by the Ordering Party,

B. permanent and visible marking of each package of each of the devices with the logo of the European Union flag together with a statement on the method of financing: "Funded by the European Union", the template of which is Appendix No. 1A to the Terms of Use – "Model logotype", subject to:

a. dimensions of the EU flag – the dimensions of the EU flag may not be smaller than:

10.5 cm (height) x 16 cm (width), with an appropriately visible statement on the method of financing,

1 cm (height), with a suitably visible statement on the method of financing – for packaging with dimensions less than or equal to 21 cm x 29.7 cm,

b. the necessity to maintain the proportions of the logotype and the statement on the method of financing in relation to each other,

c. the necessity to maintain the proportions of the logotype and the statement on the method of financing in relation to the packaging – clear visibility of the marking,

d. the necessity to maintain the colour scheme of the logotype and the statement on the method of financing (compliance with the template),

e. The Contracting Authority allows the packaging of the CBRN device to be marked with stickers, stickers and similar materials, if they ensure a permanent bond with the packaging of the device,

f. The Ordering Party allows labelling of the collective packaging of devices only if the equipment in question is packaged by the manufacturer, i.e. when the device packed in unit packaging is usually transported in a collective packaging. In particular, the Contracting Authority does not allow the combination of unit packages into collective packages or collective packages customarily packaged by the manufacturer, into larger collective packages (packages "packaged" by the Contractor) in order to avoid the obligation of the Contractor to mark each unit and/or collective packaging of the device,

C. providing the Contracting Authority with a quality guarantee for the delivered equipment at least until 31 December 2026, under which the Contractor will be obliged to:

a. removal of defects and defects of the device,

b. carry out or ensure periodic inspections of the device or its individual components, as required and/or recommended by the manufacturer of the device, including to ensure ongoing (during the period of operation) and/or periodic (in particular during or as a result of periodic inspection) replacement and/or replenishment of consumables and/or replacement parts,

at the sole expense of the Contractor and under the conditions set out in Appendix 2 to the Terms of Use – "Draft Contractual Provisions".

3. A detailed description of the subject matter of the contract, in particular the specification of the technical and functional parameters of the subject matter of the contract, with a detailed division into Parts, is attached as Appendix No. 1 to the Terms of Reference – "Description of the subject matter of the contract".

4. The terms and conditions of performance of the subject matter of the contract are set out in Appendix No. 2B to the Terms of Reference – "Draft Contractual Provisions".

1. As part of Part 3 of the contract, the Contractor will be obliged to deliver a spectrometer for quick and automatic analysis and identification of unknown homogeneous substances and mixtures of compounds, using the phenomenon of Raman spectroscopy, in the amount of 20 pieces, in accordance with the technical specification specified in Appendix 1 to the Terms of Reference – "Description of the subject of the contract".

2. Regardless of the service consisting in the delivery of the equipment referred to in paragraph 1 above, the Contractor shall also be obliged to:

A. conduct a one-day training in the field of operation, maintenance and use of the delivered equipment for not less than 6 and not more than 9 employees of the Ordering Party or other persons designated by the Ordering Party,

B. permanent and visible marking of each package of each of the devices with the logo of the European Union flag together with a statement on the method of financing: "Funded by the European Union", the template of which is Appendix No. 1A to the Terms of Use – "Model logotype", subject to:

a. dimensions of the EU flag – the dimensions of the EU flag may not be smaller than:

10.5 cm (height) x 16 cm (width), with an appropriately visible statement on the method of financing,

1 cm (height), with a suitably visible statement on the method of financing – for packaging with dimensions less than or equal to 21 cm x 29.7 cm,

b. the necessity to maintain the proportions of the logotype and the statement on the method of financing in relation to each other,

c. the necessity to maintain the proportions of the logotype and the statement on the method of financing in relation to the packaging – clear visibility of the marking,

d. the necessity to maintain the colour scheme of the logotype and the statement on the method of financing (compliance with the template),

e. The Contracting Authority allows the packaging of the CBRN device to be marked with stickers, stickers and similar materials, if they ensure a permanent bond with the packaging of the device,

f. The Ordering Party allows labelling of the collective packaging of devices only if the equipment in question is packaged by the manufacturer, i.e. when the device packed in unit packaging is usually transported in a collective packaging. In particular, the Contracting Authority does not allow the combination of unit packages into collective packages or collective packages customarily packaged by the manufacturer, into larger collective packages (packages "packaged" by the Contractor) in order to avoid the obligation of the Contractor to mark each unit and/or collective packaging of the device,

C. providing the Contracting Authority with a quality guarantee for the delivered equipment at least until 31 December 2026, under which the Contractor will be obliged to:

a. removal of defects and defects of the device,

b. carry out or ensure periodic inspections of the device or its individual components, as required and/or recommended by the manufacturer of the device, including to ensure ongoing (during the period of operation) and/or periodic (in particular during or as a result of periodic inspection) replacement and/or replenishment of consumables and/or replacement parts,

at the sole expense of the Contractor and under the conditions set out in Appendix 2 to the Terms of Use – "Draft Contractual Provisions".

3. A detailed description of the subject matter of the contract, in particular the specification of the technical and functional parameters of the subject matter of the contract, with a detailed division into Parts, is attached as Appendix No. 1 to the Terms of Reference – "Description of the subject matter of the contract".

4. The terms and conditions of performance of the subject matter of the contract are set out in Appendices C to the Terms of Reference – "Draft Contractual Provisions".

1. As part of Lot 4 of the contract, the Contractor will be obliged to deliver a portable gas chromatograph/mass spectrometer (GC.MS) system, in the amount of 13 pieces, in accordance with the technical specification specified in Appendix 1 to the Terms of Reference – "Description of the subject matter of the contract".

2. Regardless of the service consisting in the delivery of the equipment referred to in paragraph 1 above, the Contractor shall also be obliged to:

A. conduct a one-day training in the field of operation, maintenance and use of the delivered equipment for not less than 6 and not more than 9 employees of the Ordering Party or other persons designated by the Ordering Party,

B. permanent and visible marking of each package of each of the devices with the logo of the European Union flag together with a statement on the method of financing: "Funded by the European Union", the template of which is Appendix No. 1A to the Terms of Use – "Model logotype", subject to:

a. dimensions of the EU flag – the dimensions of the EU flag may not be smaller than:

10.5 cm (height) x 16 cm (width), with an appropriately visible statement on the method of financing,

1 cm (height), with a suitably visible statement on the method of financing – for packaging with dimensions less than or equal to 21 cm x 29.7 cm,

b. the necessity to maintain the proportions of the logotype and the statement on the method of financing in relation to each other,

c. the necessity to maintain the proportions of the logotype and the statement on the method of financing in relation to the packaging – clear visibility of the marking,

d. the necessity to maintain the colour scheme of the logotype and the statement on the method of financing (compliance with the template),

e. The Contracting Authority allows the packaging of the CBRN device to be marked with stickers, stickers and similar materials, if they ensure a permanent bond with the packaging of the device,

f. The Ordering Party allows labelling of the collective packaging of devices only if the equipment in question is packaged by the manufacturer, i.e. when the device packed in unit packaging is usually transported in a collective packaging. In particular, the Contracting Authority does not allow the combination of unit packages into collective packages or collective packages customarily packaged by the manufacturer, into larger collective packages (packages "packaged" by the Contractor) in order to avoid the obligation of the Contractor to mark each unit and/or collective packaging of the device,

C. providing the Contracting Authority with a quality guarantee for the delivered equipment at least until 31 December 2026, under which the Contractor will be obliged to:

a. removal of defects and defects of the device,

b. carry out or ensure periodic inspections of the device or its individual components, as required and/or recommended by the manufacturer of the device, including to ensure ongoing (during the period of operation) and/or periodic (in particular during or as a result of periodic inspection) replacement and/or replenishment of consumables and/or replacement parts,

at the sole expense of the Contractor and under the conditions set out in Appendix 2 to the Terms of Use – "Draft Contractual Provisions".

3. A detailed description of the subject matter of the contract, in particular the specification of the technical and functional parameters of the subject matter of the contract, with a detailed division into Parts, is attached as Appendix No. 1 to the Terms of Reference – "Description of the subject matter of the contract".

4. The terms and conditions of performance of the subject matter of the contract are set out in Appendices No. 2D to the Terms of Reference – "Draft contractual provisions".

1. As part of Lot 5 of the contract, the Contractor will be obliged to deliver a manual contamination monitor, in the amount of 20 pieces, in accordance with the technical specification specified in Appendix 1 to the Terms of Reference – "Description of the subject matter of the contract".

2. Regardless of the service consisting in the delivery of the equipment referred to in paragraph 1 above, the Contractor shall also be obliged to:

A. conduct a one-day training in the field of operation, maintenance and use of the delivered equipment for not less than 6 and not more than 9 employees of the Ordering Party or other persons designated by the Ordering Party,

B. permanent and visible marking of each package of each of the devices with the logo of the European Union flag together with a statement on the method of financing: "Funded by the European Union", the template of which is Appendix No. 1A to the Terms of Use – "Model logotype", subject to:

a. dimensions of the EU flag – the dimensions of the EU flag may not be smaller than:

10.5 cm (height) x 16 cm (width), with an appropriately visible statement on the method of financing,

1 cm (height), with a suitably visible statement on the method of financing – for packaging with dimensions less than or equal to 21 cm x 29.7 cm,

b. the necessity to maintain the proportions of the logotype and the statement on the method of financing in relation to each other,

c. the necessity to maintain the proportions of the logotype and the statement on the method of financing in relation to the packaging – clear visibility of the marking,

d. the necessity to maintain the colour scheme of the logotype and the statement on the method of financing (compliance with the template),

e. The Contracting Authority allows the packaging of the CBRN device to be marked with stickers, stickers and similar materials, if they ensure a permanent bond with the packaging of the device,

f. The Ordering Party allows labelling of the collective packaging of devices only if the equipment in question is packaged by the manufacturer, i.e. when the device packed in unit packaging is usually transported in a collective packaging. In particular, the Contracting Authority does not allow the combination of unit packages into collective packages or collective packages customarily packaged by the manufacturer, into larger collective packages (packages "packaged" by the Contractor) in order to avoid the obligation of the Contractor to mark each unit and/or collective packaging of the device,

C. providing the Contracting Authority with a quality guarantee for the delivered equipment at least until 31 December 2026, under which the Contractor will be obliged to:

a. removal of defects and defects of the device,

b. carry out or ensure periodic inspections of the device or its individual components, as required and/or recommended by the manufacturer of the device, including to ensure ongoing (during the period of operation) and/or periodic (in particular during or as a result of periodic inspection) replacement and/or replenishment of consumables and/or replacement parts,

at the sole expense of the Contractor and under the conditions set out in Appendix 2 to the Terms of Use – "Draft Contractual Provisions".

3. A detailed description of the subject matter of the contract, in particular the specification of the technical and functional parameters of the subject matter of the contract, with a detailed division into Parts, is attached as Appendix No. 1 to the Terms of Reference – "Description of the subject matter of the contract".

4. The terms and conditions of the performance of the subject matter of the contract are set out in Appendix No. 2E to the Terms of Reference – "Draft Contractual Provisions".

1. As part of Lot 6 of the contract, the Contractor will be required to provide:

A. 2000 pieces of electronic personal dosimeter with direct reading,

B. 25 electronic personal dosimeter with neutron dose measurement function,

in accordance with the technical specification specified in Appendix 1 to the Terms of Reference "Description of the subject matter of the contract" and with the proviso that the Contractor, until the end of 2026, is obliged to ensure the continuity of validity of dosimeter calibration certificates issued by an accredited measurement laboratory, in accordance with Article 27(2) of the Atomic Law of 29 November 2000 and the Regulation of the Council of Ministers of 23 December 2002 on requirements for dosimetry equipment.

2. Regardless of the service consisting in the delivery of the equipment referred to in paragraph 1 above, the Contractor shall also be obliged to:

A. conduct a one-day training in the field of operation, maintenance and use of the delivered equipment for not less than 6 and not more than 9 employees of the Ordering Party or other persons designated by the Ordering Party,

B. permanent and visible marking of each package of each of the devices with the logo of the European Union flag together with a statement on the method of financing: "Funded by the European Union", the template of which is Appendix No. 1A to the Terms of Use – "Model logotype", subject to:

a. dimensions of the EU flag – the dimensions of the EU flag may not be smaller than:

10.5 cm (height) x 16 cm (width), with an appropriately visible statement on the method of financing,

1 cm (height), with a suitably visible statement on the method of financing – for packaging with dimensions less than or equal to 21 cm x 29.7 cm,

b. the necessity to maintain the proportions of the logotype and the statement on the method of financing in relation to each other,

c. the necessity to maintain the proportions of the logotype and the statement on the method of financing in relation to the packaging – clear visibility of the marking,

d. the necessity to maintain the colour scheme of the logotype and the statement on the method of financing (compliance with the template),

e. The Contracting Authority allows the packaging of the CBRN device to be marked with stickers, stickers and similar materials, if they ensure a permanent bond with the packaging of the device,

f. The Ordering Party allows labelling of the collective packaging of devices only if the equipment in question is packaged by the manufacturer, i.e. when the device packed in unit packaging is usually transported in a collective packaging. In particular, the Contracting Authority does not allow the combination of unit packages into collective packages or collective packages customarily packaged by the manufacturer, into larger collective packages (packages "packaged" by the Contractor) in order to avoid the obligation of the Contractor to mark each unit and/or collective packaging of the device,

C. providing the Contracting Authority with a quality guarantee for the delivered equipment at least until 31 December 2026, under which the Contractor will be obliged to:

a. removal of defects and defects of the device,

b. carry out or ensure periodic inspections of the device or its individual components, as required and/or recommended by the manufacturer of the device, including to ensure ongoing (during the period of operation) and/or periodic (in particular during or as a result of periodic inspection) replacement and/or replenishment of consumables and/or replacement parts,

at the sole expense of the Contractor and under the conditions set out in Appendix 2 to the Terms of Use – "Draft Contractual Provisions".

3. A detailed description of the subject matter of the contract, in particular the specification of the technical and functional parameters of the subject matter of the contract, with a detailed division into Parts, is attached as Appendix No. 1 to the Terms of Reference – "Description of the subject matter of the contract".

4. The terms and conditions of performance of the subject matter of the contract are specified in Appendix No. 2F to the Terms of Reference – "Draft contractual provisions".

1. As part of Part 7 of the contract, the Contractor will be obliged to provide a portable analyzer for radioactive contamination testing of environmental and food samples, in the amount of 5 pieces, in accordance with the technical specification specified in Appendix No. 1 to the Terms of Reference – "Description of the subject of the contract",

2. Regardless of the service consisting in the delivery of the equipment referred to in paragraph 1 above, the Contractor shall also be obliged to:

A. conduct a one-day training in the field of operation, maintenance and use of the delivered equipment for not less than 6 and not more than 9 employees of the Ordering Party or other persons designated by the Ordering Party,

B. permanent and visible marking of each package of each of the devices with the logo of the European Union flag together with a statement on the method of financing: "Funded by the European Union", the template of which is Appendix No. 1A to the Terms of Use – "Model logotype", subject to:

a. dimensions of the EU flag – the dimensions of the EU flag may not be smaller than:

10.5 cm (height) x 16 cm (width), with an appropriately visible statement on the method of financing,

1 cm (height), with a suitably visible statement on the method of financing – for packaging with dimensions less than or equal to 21 cm x 29.7 cm,

b. the necessity to maintain the proportions of the logotype and the statement on the method of financing in relation to each other,

c. the necessity to maintain the proportions of the logotype and the statement on the method of financing in relation to the packaging – clear visibility of the marking,

d. the necessity to maintain the colour scheme of the logotype and the statement on the method of financing (compliance with the template),

e. The Contracting Authority allows the packaging of the CBRN device to be marked with stickers, stickers and similar materials, if they ensure a permanent bond with the packaging of the device,

f. The Ordering Party allows labelling of the collective packaging of devices only if the equipment in question is packaged by the manufacturer, i.e. when the device packed in unit packaging is usually transported in a collective packaging. In particular, the Contracting Authority does not allow the combination of unit packages into collective packages or collective packages customarily packaged by the manufacturer, into larger collective packages (packages "packaged" by the Contractor) in order to avoid the obligation of the Contractor to mark each unit and/or collective packaging of the device,

C. providing the Contracting Authority with a quality guarantee for the delivered equipment at least until 31 December 2026, under which the Contractor will be obliged to:

a. removal of defects and defects of the device,

b. carry out or ensure periodic inspections of the device or its individual components, as required and/or recommended by the manufacturer of the device, including to ensure ongoing (during the period of operation) and/or periodic (in particular during or as a result of periodic inspection) replacement and/or replenishment of consumables and/or replacement parts,

at the sole expense of the Contractor and under the conditions set out in Appendix 2 to the Terms of Use – "Draft Contractual Provisions".

3. A detailed description of the subject matter of the contract, in particular the specification of the technical and functional parameters of the subject matter of the contract, with a detailed division into Parts, is attached as Appendix No. 1 to the Terms of Reference – "Description of the subject matter of the contract".

4. The terms and conditions of performance of the subject matter of the contract are set out in Appendix No. 2G to the Terms of Reference – "Draft Contractual Provisions".

1. As part of Part 8 of the contract, the Contractor will be obliged to deliver a hand-held device for detecting, locating and identifying radioactive isotopes, in the amount of 20 pieces, in accordance with the technical specification specified in Appendix No. 1 to the Terms of Reference – "Description of the subject matter of the contract",

2. Regardless of the service consisting in the delivery of the equipment referred to in paragraph 1 above, the Contractor shall also be obliged to:

A. conduct a one-day training in the field of operation, maintenance and use of the delivered equipment for not less than 6 and not more than 9 employees of the Ordering Party or other persons designated by the Ordering Party,

B. permanent and visible marking of each package of each of the devices with the logo of the European Union flag together with a statement on the method of financing: "Funded by the European Union", the template of which is Appendix No. 1A to the Terms of Use – "Model logotype", subject to:

a. dimensions of the EU flag – the dimensions of the EU flag may not be smaller than:

10.5 cm (height) x 16 cm (width), with an appropriately visible statement on the method of financing,

1 cm (height), with a suitably visible statement on the method of financing – for packaging with dimensions less than or equal to 21 cm x 29.7 cm,

b. the necessity to maintain the proportions of the logotype and the statement on the method of financing in relation to each other,

c. the necessity to maintain the proportions of the logotype and the statement on the method of financing in relation to the packaging – clear visibility of the marking,

d. the necessity to maintain the colour scheme of the logotype and the statement on the method of financing (compliance with the template),

e. The Contracting Authority allows the packaging of the CBRN device to be marked with stickers, stickers and similar materials, if they ensure a permanent bond with the packaging of the device,

f. The Ordering Party allows labelling of the collective packaging of devices only if the equipment in question is packaged by the manufacturer, i.e. when the device packed in unit packaging is usually transported in a collective packaging. In particular, the Contracting Authority does not allow the combination of unit packages into collective packages or collective packages customarily packaged by the manufacturer, into larger collective packages (packages "packaged" by the Contractor) in order to avoid the obligation of the Contractor to mark each unit and/or collective packaging of the device,

C. providing the Contracting Authority with a quality guarantee for the delivered equipment at least until 31 December 2026, under which the Contractor will be obliged to:

a. removal of defects and defects of the device,

b. carry out or ensure periodic inspections of the device or its individual components, as required and/or recommended by the manufacturer of the device, including to ensure ongoing (during the period of operation) and/or periodic (in particular during or as a result of periodic inspection) replacement and/or replenishment of consumables and/or replacement parts,

at the sole expense of the Contractor and under the conditions set out in Appendix 2 to the Terms of Use – "Draft Contractual Provisions".

3. A detailed description of the subject matter of the contract, in particular the specification of the technical and functional parameters of the subject matter of the contract, with a detailed division into Parts, is attached as Appendix No. 1 to the Terms of Reference – "Description of the subject matter of the contract".

4. The terms and conditions of performance of the subject matter of the contract are specified in Appendices No. 2H to the Terms of Reference – "Draft Contractual Provisions".

1. As part of Part 9 of the contract, the Contractor will be obliged to deliver a multifunctional thermal imaging camera, in the amount of 20 pieces, in accordance with the technical specification specified in Appendix No. 1 to the Terms of Reference – "Description of the subject of the contract",

2. Regardless of the service consisting in the delivery of the equipment referred to in paragraph 1 above, the Contractor shall also be obliged to:

A. conduct a one-day training in the field of operation, maintenance and use of the delivered equipment for not less than 6 and not more than 9 employees of the Ordering Party or other persons designated by the Ordering Party,

B. permanent and visible marking of each package of each of the devices with the logo of the European Union flag together with a statement on the method of financing: "Funded by the European Union", the template of which is Appendix No. 1A to the Terms of Use – "Model logotype", subject to:

a. dimensions of the EU flag – the dimensions of the EU flag may not be smaller than:

10.5 cm (height) x 16 cm (width), with an appropriately visible statement on the method of financing,

1 cm (height), with a suitably visible statement on the method of financing – for packaging with dimensions less than or equal to 21 cm x 29.7 cm,

b. the necessity to maintain the proportions of the logotype and the statement on the method of financing in relation to each other,

c. the necessity to maintain the proportions of the logotype and the statement on the method of financing in relation to the packaging – clear visibility of the marking,

d. the necessity to maintain the colour scheme of the logotype and the statement on the method of financing (compliance with the template),

e. The Contracting Authority allows the packaging of the CBRN device to be marked with stickers, stickers and similar materials, if they ensure a permanent bond with the packaging of the device,

f. The Ordering Party allows labelling of the collective packaging of devices only if the equipment in question is packaged by the manufacturer, i.e. when the device packed in unit packaging is usually transported in a collective packaging. In particular, the Contracting Authority does not allow the combination of unit packages into collective packages or collective packages customarily packaged by the manufacturer, into larger collective packages (packages "packaged" by the Contractor) in order to avoid the obligation of the Contractor to mark each unit and/or collective packaging of the device,

C. providing the Contracting Authority with a quality guarantee for the delivered equipment at least until 31 December 2026, under which the Contractor will be obliged to:

a. removal of defects and defects of the device,

b. carry out or ensure periodic inspections of the device or its individual components, as required and/or recommended by the manufacturer of the device, including to ensure ongoing (during the period of operation) and/or periodic (in particular during or as a result of periodic inspection) replacement and/or replenishment of consumables and/or replacement parts,

at the sole expense of the Contractor and under the conditions set out in Appendix 2 to the Terms of Use – "Draft Contractual Provisions".

3. A detailed description of the subject matter of the contract, in particular the specification of the technical and functional parameters of the subject matter of the contract, with a detailed division into Parts, is attached as Appendix No. 1 to the Terms of Reference – "Description of the subject matter of the contract".

4. The terms and conditions of performance of the subject matter of the contract are set out in Appendices No. 2I to the Terms of Use – "Draft Contractual Provisions".