The subject of the contract is the supply of a used compactor designed for thickening waste with a plowshare. The machine was produced no earlier than 2010 and after a complete reconstruction carried out no earlier than 2023. Machine after reconstruction with a mileage of max 20 Mth resulting from the technology of reconstruction or storage of the compactor. The offered machine cannot be a prototype.

For a detailed description of the item of the order, see point 3 of SWZ.

1. The subject of the contract is the supply of a used compactor for compacting waste with a plowshare. The machine was produced no earlier than 2010 and after a complete reconstruction carried out no earlier than 2023. Machine after reconstruction with a mileage of max 20 Mth resulting from the technology of reconstruction or storage of the compactor. The offered machine cannot be a prototype.

2. Technical description of the minimum parameters of the compactor:

1) 6 cylinder diesel engine with direct injection and turbocharging.

2) Motor power minimum 330 Kw

3) Forward and reverse speed 0-14 km/h

(4) Blade expansion attachment with extension with minimum height of 1950 mm

5) Dry air filter for engine

6) Hydrostatic drive for 4 independent wheels

7) Number of forward gears minimum - 2, number of reverse gears minimum - 2

8) Right and left turn angle minimum 30°

9) Wet or dry disc brakes for 4 wheels

10) Hydraulic control of boom position: lift, hold, lower

11) 24V electrical system

12) Maintenance-free batteries

13) Fuel tank capacity minimum 400l

14) Planetary gears in wheel hubs or bridge

15) Chassis protected by removable guards against external damage

16) Weight of compactor with accessories ready for operation: 37000- 40000 kg.

17) Central lubrication system

(18) Steel wheels with fixed or replaceable spikes and adjustable deflectors in front of and after each wheel:

- number of teeth on each front wheel minimum 60 pcs.

- number of teeth on each rear wheel minimum 50 pcs

- compaction width on the front side of the wheel 1350 mm

- compaction width on the side of the wheel at the rear minimum 1125 mm

19) Rear view camera.

20) Cabin with heating and filter and ventilation device.

21) Permissible noise level according to Polish Standards.

22) Control panel with clear operating indicators and indicators.

23) Hour meter.

24) Ergonomic placement of controls.

25) Joystick operation of the blade.

26) Lockable cab doors.

27) Windscreen and rear windscreen wipers.

(28) Orange warning light.

(29) ROPS design to ensure operator safety in the event of overturning before crushing.

30) Reverse warning signal.

31) Air conditioning.

32) Suspension operator's seat.

33) Radio with speakers.

(34) Exterior mirrors on the right and left sides of the cab.

35) Beep.

36) Working lights minimum of 2 pcs. front and rear of the machine.

37) Complete disassembly of the machine, verification, regeneration, replacement of individual components with new ones:

-Engine

- pump drive reducer

- hydraulic pumps of the driving system

- pumps of the working system

- hydraulic motors of the driving system

- driving transmission

- hydraulic cylinders

- kinematic system of connecting the front and rear frames

- wheels with replacement of rings and spikes

-Electrical

- hydraulic lines

- hydraulic thermostat

- hydraulic controller

- operator's cabin

- lemiesza

- hydraulic distributor

- overlays and road wheel protections

- cleaning the oil and fuel tank

38) Bodywork and varnishing removal of the old varnish coating, painting of the entire machine.

39) Assembly of components, pressure, strength and working tests of the machine.

40) Compactor color: yellow, black wheels.

Other requirements can be found in the detailed description of the subject of the contract - point 3 SWZ.