Acquisition of new heavy rail-road trucks powered by Compressed Natural Gas (CNG), over 3.5t, for the maintenance teams of the Nantes tramway network.
Supply of a heavy rail-road truck powered by compressed natural gas equipped with a lifting platform, with possible use of the nacelle in electric mode (thermal engine off), capable of towing a tram.
The specifics of this vehicle consist of equipment intended for maintenance operations in the treaded or non-railed mode:
- ability to travel on road and rail,
- equipped with a lifting platform: capacity 265 kg with a basket that can accommodate 2 people; allowing work at a height of 11.50 m (at floor level) and a maximum offset of 8.00 m for a height of 6.00 m; usable engine running and also engine switched off in electric mode (regardless of overhead contact line: battery operation),
- usable in type 3 mode when the vehicle is crushed (movement of the vehicle controlled from the platform),
- ability to tow / push trams.
Additional services with compulsory encryption will be requested on the following points:
- vehicle warranty extension,
- extended battery guarantee for the electric mode (see paragraph II.2.4)).
Optional additional services with optional costing will be requested on the following points:
- anti-corrosion protection of the chassis,
- mirrors foldable electrically,
- 360 vision system
- cabin air conditioning,
- auxiliary heating,
- refrigerated compartment in the cabin,
- stabilization solution for the use of the platform in the railed mode, other than the stabilizers (support on the rail for example),
- retractable step to facilitate access to the vehicle in a treaded mode on a ballast track,
- retractable step (electric) to facilitate the access to the vehicle in railed mode on ballasted way.
Supply of a truck-powered CNG compressed rail-road truck equipped with a scissor lift platform, with possible use of the platform in electric mode (engine off) and moving the vehicle in electric mode (engine off).
The specificities of this vehicle consist of equipment intended for maintenance operations of the tramway line of the city of Nantes in full or non-railed mode:
- ability to travel on road and rail,
- a scissor lift platform: 4.50 m long by 2.20 m wide (outside railing dimension); capacity of 1000 kg in the axis and 500 kg after rotation, accommodating 5 people; a working height (measured at the upper level of the railing) of up to 6.50 m; a possible translation of the platform with respect to the chisel to allow a work up to 4.50 m of the axis of the track after rotation,
- a vehicle height of not more than 3.50 m (platform in rest position, measured at the highest point of the vehicle),
- an electric operating mode of the platform (elevation and rotation) when the engine is switched off (independently of the overhead contact line: battery operation),
- a possible displacement in electric mode (engine cut in ratchet mode) at low speed during the interventions (independently of the overhead contact line: battery operation),
- a mode 2 displacement in the road mode or in the trolley mode (displacement with deployed platform controlled from the cabin),
A displacement in type 3 mode when the vehicle is crushed (movement of the vehicle controlled from the platform).
Additional services with compulsory encryption will be requested on the following points:
- vehicle warranty extension,
- extended battery guarantee for the electric mode (see paragraph Ii.2.4).
Optional additional services with optional costing will be requested on the following points:
- anti-corrosion protection of the chassis,
- mirrors foldable electrically,
- 360 vision system
- cabin air conditioning,
- auxiliary heating,
- refrigerated compartment in the cabin,
- retractable step to facilitate access to the vehicle in a treaded mode on a ballast track,
- retractable step (electric) to facilitate the access to the vehicle in railed mode on ballasted way.
Supply of a heavy rail-road truck powered by compressed natural gas, equipped with a plate and a crane installed in rear overhang.
The specifics of this vehicle consist of equipment intended for maintenance operations in the treaded or non-railed mode:
- a plateau equipped with removable sideboards, the height of the plateau in road mode is between 1.00 m and 1.30 m,
- a crane installed in a rear overhang: allowing the installation of a 1,260 kg pole measuring 8.00 m long at 5.00 m from the center line; allowing the installation of temporary concrete piles of 2,600 kg at 5 m from the center line,
- sizing and arrangements for the safe transport of an 8.00 m long pole of 1260 kg of section 0.30 x 0.30 m,
- a tray design allowing to accommodate up to 4 "Europe" type pallets,
- a payload greater than or equal to 6 500 kg.
An additional service with mandatory encryption will be requested on the following point: extended warranty of the vehicle.
Optional additional services with optional costing will be requested on the following points:
- anti-corrosion protection of the chassis,
- mirrors foldable electrically,
- 360 vision system
- cabin air conditioning,
- auxiliary heating,
- refrigerated compartment in the cabin,
- stabilization solution for use of the crane in the hoist mode, other than the stabilizers (support on the rail for example),
- retractable step to facilitate access to the vehicle in a treaded mode on a ballast track,
- retractable step (electric) to facilitate the access to the vehicle in railed mode on ballasted way.