Delivery for purchase of 1 demonstration or new vehicle of the type 3-axle dump vehicle with rear loading crane including felling grab and a permissible total weight of approx. 27.0 t

The object of the service is the delivery for the purchase of

1 demonstration or new vehicle of the type 3-axle dump truck with rear loading crane including a felling grab and a permissible Total weight of approx. 27.0 t, which must meet the following requirements, among others:

- Perm. Total weight approx. 27.0 t (+/- 10%)

- Diesel engine with an output of approx. 375 kW (+/- 10%)

- Wheelbase approx. 4,800 mm (+/- 10%)

- exhaust emission standard EURO 6 or better

- axle load measuring device

- Timber truck construction

- Special steel hopper with hydraulically operated

hinged lids

- container capacity approx. 41 cbm (+/- 10%)

- container length 6,200 mm

- Tank back wall height 1,600 mm

- thickness of the container bottom plate 5 mm

- thickness of the container front and container side plates 4 mm

- Double-telescopic timber loading crane with cab and one reach

from 11.5 m

- Double slewing gear with a swivel range of the loading crane

from 425 degrees

- Support boom with a maximum width of 4.7 m

- Rear space video system with color monitor in the crane cabin

- diesel heating in the crane cabin

- Log grapples with an opening width of approx. 2,000 mm (+/- 10%)

and a load capacity of approx. 5,000 kg (+/- 10%)

- Felling grabs with TTC (total tree control) function, an opening width

of approx. 1,200 mm (+/- 10%), a load capacity of

approx. 2,500 kg (+/- 10%), a blade length of approx. 650 mm

(+/- 10%) and a maximum felling diameter of approx. 500 mm

(+/- 10%)

The complete technical specifications and minimum requirements for the vehicle and attachments are set out in the specifications that these tender documents contain.