Supply and installation of five laboratory devices in the manufacturing laboratory of the industrial department of the CNPE in Chinon.

Breakdown into five lots as detailed below:

- lot 1: supply and installation of a Charpy pendulum sheep and its associated oven,

- lot 2: supply and installation of a hydraulic traction machine,

- lot 3: supply and installation of an electromechanical traction machine,

- lot 4: supply and installation of a tubular enclosure for an electromechanical traction / compression machine,

- lot 5: supply and installation of a thermal enclosure for a servo-hydraulic traction / compression machine.

Supply and installation of an instrumented Charpy pendulum ram with initial potential energy Kp between 450 Joules and 750 Joules associated with a thermal chamber for conditioning several specimens for low and high temperature tests (between - 195 ºC and + 450 ºC).

Supply and installation of a servo-hydraulic traction / compression machine with a minimum capacity of 100 kN.

Supply and installation of an electromechanical traction / compression machine with a minimum capacity of 250 kN.

Supply and installation of a tubular thermal enclosure and its support for an electromechanical traction / compression machine with a capacity of 250 kN or 500 kN.

Supply and installation supply of a ventilated thermal enclosure for a servo-hydraulic traction / compression machine with a capacity of 100 kN.