1. The subject of the contract is the supply of personal protective equipment under the project "Development and maintenance of rescEU CBRN stockpiles in Poland" – stage II. .

2. The Order has been divided into eleven Lots.

1. The subject of the contract in Lot 1 is the delivery of air purification devices with a full face mask, in the amount of 2,000 sets (sets), in accordance with the technical specification specified in Appendix No. 1 to the Terms of Reference – "Description of the subject of the contract".

2. Regardless of the service consisting in the provision of personal protective equipment referred to in paragraph 1 above, the Contractor is also obliged to:

A. permanent and visible marking of each package of each of the personal protective equipment with the logo of the European Union flag together with a statement on the method of financing: "Funded by the European Union", the template of which is Appendix No. 1A to the Terms of Use – "Logo Template", subject to:

a. dimensions of the EU flag – the dimensions of the EU flag may not be smaller than:

10.5 cm (height) x 16 cm (width), with an appropriately visible statement on the method of financing,

1 cm (height), with a suitably visible statement on the method of financing – for packaging with dimensions less than or equal to 21 cm x 29.7 cm,

b. the necessity to maintain the proportions of the logotype and the statement on the method of financing in relation to each other,

c. the necessity to maintain the proportions of the logotype and the statement on the method of financing in relation to the packaging – clear visibility of the marking,

d. the necessity to maintain the colour scheme of the logotype and the statement on the method of financing (compliance with the template),

e. The Contracting Authority allows the packaging of personal protective equipment to be labelled with stickers, stickers and similar materials if they ensure a permanent bond with the packaging of the personal protective equipment

f. The Contracting Authority allows the marking of the collective packaging of personal protective equipment only if the personal protective equipment is packaged by the manufacturer, i.e. when the personal protective equipment packed in a unit package is usually transported in a collective packaging. In particular, the Contracting Authority does not allow the combination of individual packages into collective packages or collective packages customarily packaged by the manufacturer into larger collective packages (packages "packaged" by the Contractor) in order to avoid the obligation of the Contractor to label each unit and/or collective packaging of personal protective equipment,

B. provide the Contracting Authority with a quality guarantee for the personal protective equipment supplied at least until 31 December 2026, under which the Contractor will be obliged to:

a. removal of defects and defects of personal protective equipment,

b. carrying out or ensuring periodic inspections of personal protective equipment or its individual components, as required and/or recommended by the manufacturer, including to ensure ongoing (during the period of operation) and/or periodic (in particular during or as a result of periodic inspection) replacement and/or replenishment of consumables and/or replacement parts,

at the sole expense of the Contractor and under the conditions set out in Appendix 2A to the Terms of Reference – "Draft Contractual Provisions",

C. conducting a one-day training in the operation, maintenance and use of the provided personal protective equipment for not less than 6 and not more than 9 employees of the Ordering Party or other persons designated by the Ordering Party,

3. A detailed description of the subject matter of the contract, in particular the specification of the technical and functional parameters of the subject matter of the contract, with a detailed division into Parts, is attached as Appendix No. 1 to the Terms of Reference – "Description of the subject matter of the contract".

4. The terms and conditions of performance of the subject matter of the contract are specified in Appendix No. 2A to the Terms of Reference – "Draft contractual provisions".

1. The subject of the contract in Lot 10 is the delivery of:

a. 25,000 pairs of chemical protection gloves,

b. 25,000 pairs of biological protection gloves,

c. 15,000 pairs of chemical/biological protection boots,

in accordance with the technical specification specified in Appendix 1 to the Terms of Reference – "Description of the subject matter of the contract".

2. Regardless of the service consisting in the provision of personal protective equipment referred to in paragraph 1 above, the Contractor is also obliged to:

A. permanent and visible marking of each package of each of the personal protective equipment with the logo of the European Union flag together with a statement on the method of financing: "Funded by the European Union", the template of which is Appendix No. 1A to the Terms of Use – "Logo Template", subject to:

a. dimensions of the EU flag – the dimensions of the EU flag may not be smaller than:

10.5 cm (height) x 16 cm (width), with an appropriately visible statement on the method of financing,

1 cm (height), with a suitably visible statement on the method of financing – for packaging with dimensions less than or equal to 21 cm x 29.7 cm,

b. the necessity to maintain the proportions of the logotype and the statement on the method of financing in relation to each other,

c. the necessity to maintain the proportions of the logotype and the statement on the method of financing in relation to the packaging – clear visibility of the marking,

d. the necessity to maintain the colour scheme of the logotype and the statement on the method of financing (compliance with the template),

e. The Contracting Authority allows the packaging of personal protective equipment to be labelled with stickers, stickers and similar materials if they ensure a permanent bond with the packaging of the personal protective equipment

f. The Contracting Authority allows the marking of the collective packaging of personal protective equipment only if the personal protective equipment is packaged by the manufacturer, i.e. when the personal protective equipment packed in a unit package is usually transported in a collective packaging. In particular, the Contracting Authority does not allow the combination of individual packages into collective packages or collective packages customarily packaged by the manufacturer into larger collective packages (packages "packaged" by the Contractor) in order to avoid the obligation of the Contractor to label each unit and/or collective packaging of personal protective equipment,

B. providing the Contracting Authority with a quality guarantee for the supplied personal protective equipment at least until 31 December 2026, under which the Contractor will be obliged to remove defects and defects in personal protective equipment, at the sole expense of the Contractor and under the conditions set out in Appendix No. 2J to the Terms of Reference – "Draft Contractual Provisions".

3. A detailed description of the subject matter of the contract, in particular the specification of the technical and functional parameters of the subject matter of the contract, with a detailed division into Parts, is attached as Appendix No. 1 to the Terms of Reference – "Description of the subject matter of the contract".

4. The terms and conditions of performance of the subject matter of the contract are set out in Appendix No. 2J to the Terms of Reference – "Draft contractual provisions".

1. The subject of the contract in Lot 11 is the delivery of a hybrid respiratory protection system, in the amount of 120 pieces, in accordance with the technical specification specified in Appendix No. 1 to the Terms of Reference – "Description of the subject of the contract".

2. Regardless of the service consisting in the provision of personal protective equipment referred to in paragraph 1 above, the Contractor is also obliged to:

A. permanent and visible marking of each package of each of the personal protective equipment with the logo of the European Union flag together with a statement on the method of financing: "Funded by the European Union", the template of which is Appendix No. 1A to the Terms of Use – "Logo Template", subject to:

a. dimensions of the EU flag – the dimensions of the EU flag may not be smaller than:

10.5 cm (height) x 16 cm (width), with an appropriately visible statement on the method of financing,

1 cm (height), with a suitably visible statement on the method of financing – for packaging with dimensions less than or equal to 21 cm x 29.7 cm,

b. the necessity to maintain the proportions of the logotype and the statement on the method of financing in relation to each other,

c. the necessity to maintain the proportions of the logotype and the statement on the method of financing in relation to the packaging – clear visibility of the marking,

d. the necessity to maintain the colour scheme of the logotype and the statement on the method of financing (compliance with the template),

e. The Contracting Authority allows the packaging of personal protective equipment to be labelled with stickers, stickers and similar materials if they ensure a permanent bond with the packaging of the personal protective equipment

f. The Contracting Authority allows the marking of the collective packaging of personal protective equipment only if the personal protective equipment is packaged by the manufacturer, i.e. when the personal protective equipment packed in a unit package is usually transported in a collective packaging. In particular, the Contracting Authority does not allow the combination of individual packages into collective packages or collective packages customarily packaged by the manufacturer into larger collective packages (packages "packaged" by the Contractor) in order to avoid the obligation of the Contractor to label each unit and/or collective packaging of personal protective equipment,

B. provide the Contracting Authority with a quality guarantee for the personal protective equipment supplied at least until 31 December 2026, under which the Contractor will be obliged to:

a. removal of defects and defects of personal protective equipment,

b. carrying out or ensuring periodic inspections of personal protective equipment or its individual components, as required and/or recommended by the manufacturer, including to ensure ongoing (during the period of operation) and/or periodic (in particular during or as a result of periodic inspection) replacement and/or replenishment of consumables and/or replacement parts,

at the sole expense of the Contractor and under the conditions set out in Appendix 2K to the Terms of Use – "Draft Contractual Provisions",

C. conducting a one-day training in the operation, maintenance and use of the provided personal protective equipment for not less than 6 and not more than 9 employees of the Ordering Party or other persons designated by the Ordering Party,

3. A detailed description of the subject matter of the contract, in particular the specification of the technical and functional parameters of the subject matter of the contract, with a detailed division into Parts, is attached as Appendix No. 1 to the Terms of Reference – "Description of the subject matter of the contract".

4. The terms and conditions of performance of the subject matter of the contract are set out in Appendix No. 2K to the Terms of Reference – "Draft contractual provisions".

1. The subject of the contract in Lot 2 is the delivery of full-face masks for filters and filter absorbers with RD 40 thread, in the amount of 17,000 pieces, in accordance with the technical specification specified in Appendix No. 1 to the Terms of Reference – "Description of the subject of the contract".

2. Regardless of the service consisting in the provision of personal protective equipment referred to in paragraph 1 above, the Contractor is also obliged to:

A. permanent and visible marking of each package of each of the personal protective equipment with the logo of the European Union flag together with a statement on the method of financing: "Funded by the European Union", the template of which is Appendix No. 1A to the Terms of Use – "Logo Template", subject to:

a. dimensions of the EU flag – the dimensions of the EU flag may not be smaller than:

10.5 cm (height) x 16 cm (width), with an appropriately visible statement on the method of financing,

1 cm (height), with a suitably visible statement on the method of financing – for packaging with dimensions less than or equal to 21 cm x 29.7 cm,

b. the necessity to maintain the proportions of the logotype and the statement on the method of financing in relation to each other,

c. the necessity to maintain the proportions of the logotype and the statement on the method of financing in relation to the packaging – clear visibility of the marking,

d. the necessity to maintain the colour scheme of the logotype and the statement on the method of financing (compliance with the template),

e. The Contracting Authority allows the packaging of personal protective equipment to be labelled with stickers, stickers and similar materials if they ensure a permanent bond with the packaging of the personal protective equipment

f. The Contracting Authority allows the marking of the collective packaging of personal protective equipment only if the personal protective equipment is packaged by the manufacturer, i.e. when the personal protective equipment packed in a unit package is usually transported in a collective packaging. In particular, the Contracting Authority does not allow the combination of individual packages into collective packages or collective packages customarily packaged by the manufacturer into larger collective packages (packages "packaged" by the Contractor) in order to avoid the obligation of the Contractor to label each unit and/or collective packaging of personal protective equipment,

B. provide the Contracting Authority with a quality guarantee for the personal protective equipment supplied at least until 31 December 2026, under which the Contractor will be obliged to:

a. removal of defects and defects of personal protective equipment,

b. carrying out or ensuring periodic inspections of personal protective equipment or its individual components, as required and/or recommended by the manufacturer, including to ensure ongoing (during the period of operation) and/or periodic (in particular during or as a result of periodic inspection) replacement and/or replenishment of consumables and/or replacement parts,

at the sole expense of the Contractor and under the conditions set out in Appendix 2B to the Terms of Use – "Draft Contractual Provisions",

C. conducting a one-day training in the operation, maintenance and use of the provided personal protective equipment for not less than 6 and not more than 9 employees of the Ordering Party or other persons designated by the Ordering Party,

3. A detailed description of the subject matter of the contract, in particular the specification of the technical and functional parameters of the subject matter of the contract, with a detailed division into Parts, is attached as Appendix No. 1 to the Terms of Reference – "Description of the subject matter of the contract".

4. The terms and conditions of performance of the subject matter of the contract are set out in Appendix 2B to the Terms of Reference – "Draft contractual provisions".

1. The subject of the contract in Lot 3 is the delivery of equipment for the transport of infectious patients, in the amount of 50 pieces, in accordance with the technical specification specified in Appendix No. 1 to the Terms of Reference – "Description of the subject of the contract".

2. Regardless of the service consisting in the provision of personal protective equipment referred to in paragraph 1 above, the Contractor is also obliged to:

A. permanent and visible marking of each package of each of the personal protective equipment with the logo of the European Union flag together with a statement on the method of financing: "Funded by the European Union", the template of which is Appendix No. 1A to the Terms of Use – "Logo Template", subject to:

a. dimensions of the EU flag – the dimensions of the EU flag may not be smaller than:

10.5 cm (height) x 16 cm (width), with an appropriately visible statement on the method of financing,

1 cm (height), with a suitably visible statement on the method of financing – for packaging with dimensions less than or equal to 21 cm x 29.7 cm,

b. the necessity to maintain the proportions of the logotype and the statement on the method of financing in relation to each other,

c. the necessity to maintain the proportions of the logotype and the statement on the method of financing in relation to the packaging – clear visibility of the marking,

d. the necessity to maintain the colour scheme of the logotype and the statement on the method of financing (compliance with the template),

e. The Contracting Authority allows the packaging of personal protective equipment to be labelled with stickers, stickers and similar materials if they ensure a permanent bond with the packaging of the personal protective equipment

f. The Contracting Authority allows the marking of the collective packaging of personal protective equipment only if the personal protective equipment is packaged by the manufacturer, i.e. when the personal protective equipment packed in a unit package is usually transported in a collective packaging. In particular, the Contracting Authority does not allow the combination of individual packages into collective packages or collective packages customarily packaged by the manufacturer into larger collective packages (packages "packaged" by the Contractor) in order to avoid the obligation of the Contractor to label each unit and/or collective packaging of personal protective equipment,

B. provide the Contracting Authority with a quality guarantee for the personal protective equipment supplied at least until 31 December 2026, under which the Contractor will be obliged to:

a. removal of defects and defects of personal protective equipment,

b. carrying out or ensuring periodic inspections of personal protective equipment or its individual components, as required and/or recommended by the manufacturer, including to ensure ongoing (during the period of operation) and/or periodic (in particular during or as a result of periodic inspection) replacement and/or replenishment of consumables and/or replacement parts,

at the sole expense of the Contractor and under the conditions set out in Appendix 2C to the Terms of Use – "Draft Contractual Provisions",

C. conducting a one-day training in the operation, maintenance and use of the provided personal protective equipment for not less than 6 and not more than 9 employees of the Ordering Party or other persons designated by the Ordering Party,

3. A detailed description of the subject matter of the contract, in particular the specification of the technical and functional parameters of the subject matter of the contract, with a detailed division into Parts, is attached as Appendix No. 1 to the Terms of Reference – "Description of the subject matter of the contract".

4. The terms and conditions of performance of the subject matter of the contract are specified in Appendix No. 2C to the Terms of Reference – "Draft contractual provisions".

1. The subject matter of the contract in Lot 4 is the supply of

a. type 4 suits, in the amount of 25,000 pieces,

b. type 5 overalls in the amount of 15,000 pieces,

in accordance with the technical specification specified in Appendix 1 to the Terms of Reference – "Description of the subject matter of the contract".

2. Regardless of the service consisting in the provision of personal protective equipment referred to in paragraph 1 above, the Contractor is also obliged to:

A. permanent and visible marking of each package of each of the personal protective equipment with the logo of the European Union flag together with a statement on the method of financing: "Funded by the European Union", the template of which is Appendix No. 1A to the Terms of Use – "Logo Template", subject to:

a. dimensions of the EU flag – the dimensions of the EU flag may not be smaller than:

10.5 cm (height) x 16 cm (width), with an appropriately visible statement on the method of financing,

1 cm (height), with a suitably visible statement on the method of financing – for packaging with dimensions less than or equal to 21 cm x 29.7 cm,

b. the necessity to maintain the proportions of the logotype and the statement on the method of financing in relation to each other,

c. the necessity to maintain the proportions of the logotype and the statement on the method of financing in relation to the packaging – clear visibility of the marking,

d. the necessity to maintain the colour scheme of the logotype and the statement on the method of financing (compliance with the template),

e. The Contracting Authority allows the packaging of personal protective equipment to be labelled with stickers, stickers and similar materials if they ensure a permanent bond with the packaging of the personal protective equipment

f. The Contracting Authority allows the marking of the collective packaging of personal protective equipment only if the personal protective equipment is packaged by the manufacturer, i.e. when the personal protective equipment packed in a unit package is usually transported in a collective packaging. In particular, the Contracting Authority does not allow the combination of individual packages into collective packages or collective packages customarily packaged by the manufacturer into larger collective packages (packages "packaged" by the Contractor) in order to avoid the obligation of the Contractor to label each unit and/or collective packaging of personal protective equipment,

B. provide the Contracting Authority with a quality guarantee for the personal protective equipment supplied at least until 31 December 2026, under which the Contractor will be obliged to:

a. removal of defects and defects of personal protective equipment,

b. carrying out or ensuring periodic inspections of personal protective equipment or its individual components, as required and/or recommended by the manufacturer, including to ensure ongoing (during the period of operation) and/or periodic (in particular during or as a result of periodic inspection) replacement and/or replenishment of consumables and/or replacement parts,

at the sole expense of the Contractor and under the conditions set out in Appendix 2D to the Terms of Use – "Draft Contractual Provisions",

C. conducting a one-day training in the operation, maintenance and use of the provided personal protective equipment for not less than 6 and not more than 9 employees of the Ordering Party or other persons designated by the Ordering Party,

3. A detailed description of the subject matter of the contract, in particular the specification of the technical and functional parameters of the subject matter of the contract, with a detailed division into Parts, is attached as Appendix No. 1 to the Terms of Reference – "Description of the subject matter of the contract".

4. The terms and conditions of performance of the subject matter of the contract are set out in Appendix No. 2D to the Terms of Reference – "Draft contractual provisions".

1. The subject of the contract in Lot 5 is the delivery of biological protection suits with a filtering and ventilation apparatus, in the amount of 800 sets (sets), in accordance with the technical specification specified in Appendix No. 1 to the Terms of Reference – "Description of the subject of the contract".

2. Regardless of the service consisting in the provision of personal protective equipment referred to in paragraph 1 above, the Contractor is also obliged to:

A. permanent and visible marking of each package of each of the personal protective equipment with the logo of the European Union flag together with a statement on the method of financing: "Funded by the European Union", the template of which is Appendix No. 1A to the Terms of Use – "Logo Template", subject to:

a. dimensions of the EU flag – the dimensions of the EU flag may not be smaller than:

10.5 cm (height) x 16 cm (width), with an appropriately visible statement on the method of financing,

1 cm (height), with a suitably visible statement on the method of financing – for packaging with dimensions less than or equal to 21 cm x 29.7 cm,

b. the necessity to maintain the proportions of the logotype and the statement on the method of financing in relation to each other,

c. the necessity to maintain the proportions of the logotype and the statement on the method of financing in relation to the packaging – clear visibility of the marking,

d. the necessity to maintain the colour scheme of the logotype and the statement on the method of financing (compliance with the template),

e. The Contracting Authority allows the packaging of personal protective equipment to be labelled with stickers, stickers and similar materials if they ensure a permanent bond with the packaging of the personal protective equipment

f. The Contracting Authority allows the marking of the collective packaging of personal protective equipment only if the personal protective equipment is packaged by the manufacturer, i.e. when the personal protective equipment packed in a unit package is usually transported in a collective packaging. In particular, the Contracting Authority does not allow the combination of individual packages into collective packages or collective packages customarily packaged by the manufacturer into larger collective packages (packages "packaged" by the Contractor) in order to avoid the obligation of the Contractor to label each unit and/or collective packaging of personal protective equipment,

B. provide the Contracting Authority with a quality guarantee for the personal protective equipment supplied at least until 31 December 2026, under which the Contractor will be obliged to:

a. removal of defects and defects of personal protective equipment,

b. carrying out or ensuring periodic inspections of personal protective equipment or its individual components, as required and/or recommended by the manufacturer, including to ensure ongoing (during the period of operation) and/or periodic (in particular during or as a result of periodic inspection) replacement and/or replenishment of consumables and/or replacement parts,

at the sole expense of the Contractor and under the conditions set out in Appendix 2E to the Terms of Use – "Draft Contractual Provisions",

C. conducting a one-day training in the operation, maintenance and use of the provided personal protective equipment for not less than 6 and not more than 9 employees of the Ordering Party or other persons designated by the Ordering Party,

3. A detailed description of the subject matter of the contract, in particular the specification of the technical and functional parameters of the subject matter of the contract, with a detailed division into Parts, is attached as Appendix No. 1 to the Terms of Reference – "Description of the subject matter of the contract".

4. The terms and conditions of performance of the subject matter of the contract are set out in Appendix 2E to the Terms of Reference – "Draft contractual provisions".

1. The subject of the contract in Lot 6 is the delivery of type 1b suits, in the amount of 4,000 pieces, in accordance with the technical specification specified in Appendix No. 1 to the Terms of Reference – "Description of the subject of the contract".

2. Regardless of the service consisting in the provision of personal protective equipment referred to in paragraph 1 above, the Contractor is also obliged to:

A. permanent and visible marking of each package of each of the personal protective equipment with the logo of the European Union flag together with a statement on the method of financing: "Funded by the European Union", the template of which is Appendix No. 1A to the Terms of Use – "Logo Template", subject to:

a. dimensions of the EU flag – the dimensions of the EU flag may not be smaller than:

10.5 cm (height) x 16 cm (width), with an appropriately visible statement on the method of financing,

1 cm (height), with a suitably visible statement on the method of financing – for packaging with dimensions less than or equal to 21 cm x 29.7 cm,

b. the necessity to maintain the proportions of the logotype and the statement on the method of financing in relation to each other,

c. the necessity to maintain the proportions of the logotype and the statement on the method of financing in relation to the packaging – clear visibility of the marking,

d. the necessity to maintain the colour scheme of the logotype and the statement on the method of financing (compliance with the template),

e. The Contracting Authority allows the packaging of personal protective equipment to be labelled with stickers, stickers and similar materials if they ensure a permanent bond with the packaging of the personal protective equipment

f. The Contracting Authority allows the marking of the collective packaging of personal protective equipment only if the personal protective equipment is packaged by the manufacturer, i.e. when the personal protective equipment packed in a unit package is usually transported in a collective packaging. In particular, the Contracting Authority does not allow the combination of individual packages into collective packages or collective packages customarily packaged by the manufacturer into larger collective packages (packages "packaged" by the Contractor) in order to avoid the obligation of the Contractor to label each unit and/or collective packaging of personal protective equipment,

B. provide the Contracting Authority with a quality guarantee for the personal protective equipment supplied at least until 31 December 2026, under which the Contractor will be obliged to:

a. removal of defects and defects of personal protective equipment,

b. carrying out or ensuring periodic inspections of personal protective equipment or its individual components, as required and/or recommended by the manufacturer, including to ensure ongoing (during the period of operation) and/or periodic (in particular during or as a result of periodic inspection) replacement and/or replenishment of consumables and/or replacement parts,

at the sole expense of the Contractor and under the conditions set out in Appendix 2F to the Terms of Use – "Draft Contractual Provisions",

C. conducting a one-day training in the operation, maintenance and use of the provided personal protective equipment for not less than 6 and not more than 9 employees of the Ordering Party or other persons designated by the Ordering Party,

3. A detailed description of the subject matter of the contract, in particular the specification of the technical and functional parameters of the subject matter of the contract, with a detailed division into Parts, is attached as Appendix No. 1 to the Terms of Reference – "Description of the subject matter of the contract".

4. The terms and conditions of performance of the subject matter of the contract are set out in Appendix No. 2F to the Terms of Reference – "Draft contractual provisions".

1. The subject of the contract in Lot 7 is the delivery of type 3 suits, in the amount of 25,000 pieces, in accordance with the technical specification specified in Appendix No. 1 to the Terms of Reference – "Description of the subject of the contract".

2. Regardless of the service consisting in the provision of personal protective equipment referred to in paragraph 1 above, the Contractor is also obliged to:

A. permanent and visible marking of each package of each of the personal protective equipment with the logo of the European Union flag together with a statement on the method of financing: "Funded by the European Union", the template of which is Appendix No. 1A to the Terms of Use – "Logo Template", subject to:

a. dimensions of the EU flag – the dimensions of the EU flag may not be smaller than:

10.5 cm (height) x 16 cm (width), with an appropriately visible statement on the method of financing,

1 cm (height), with a suitably visible statement on the method of financing – for packaging with dimensions less than or equal to 21 cm x 29.7 cm,

b. the necessity to maintain the proportions of the logotype and the statement on the method of financing in relation to each other,

c. the necessity to maintain the proportions of the logotype and the statement on the method of financing in relation to the packaging – clear visibility of the marking,

d. the necessity to maintain the colour scheme of the logotype and the statement on the method of financing (compliance with the template),

e. The Contracting Authority allows the packaging of personal protective equipment to be labelled with stickers, stickers and similar materials if they ensure a permanent bond with the packaging of the personal protective equipment

f. The Contracting Authority allows the marking of the collective packaging of personal protective equipment only if the personal protective equipment is packaged by the manufacturer, i.e. when the personal protective equipment packed in a unit package is usually transported in a collective packaging. In particular, the Contracting Authority does not allow the combination of individual packages into collective packages or collective packages customarily packaged by the manufacturer into larger collective packages (packages "packaged" by the Contractor) in order to avoid the obligation of the Contractor to label each unit and/or collective packaging of personal protective equipment,

B. provide the Contracting Authority with a quality guarantee for the personal protective equipment supplied at least until 31 December 2026, under which the Contractor will be obliged to:

a. removal of defects and defects of personal protective equipment,

b. carrying out or ensuring periodic inspections of personal protective equipment or its individual components, as required and/or recommended by the manufacturer, including to ensure ongoing (during the period of operation) and/or periodic (in particular during or as a result of periodic inspection) replacement and/or replenishment of consumables and/or replacement parts,

at the sole expense of the Contractor and under the conditions set out in Appendix 2G to the Terms of Use – "Draft Contractual Provisions",

C. conducting a one-day training in the operation, maintenance and use of the provided personal protective equipment for not less than 6 and not more than 9 employees of the Ordering Party or other persons designated by the Ordering Party,

3. A detailed description of the subject matter of the contract, in particular the specification of the technical and functional parameters of the subject matter of the contract, with a detailed division into Parts, is attached as Appendix No. 1 to the Terms of Reference – "Description of the subject matter of the contract".

4. The terms and conditions of performance of the subject matter of the contract are set out in Appendix No. 2G to the Terms of Reference – "Draft Contractual Provisions".

1. The subject of the contract in Lot 8 is the delivery of type 3 suits with a visor, in the amount of 3,000 pieces, in accordance with the technical specification specified in Appendix No. 1 to the Terms of Reference – "Description of the subject of the contract".

2. Regardless of the service consisting in the provision of personal protective equipment referred to in paragraph 1 above, the Contractor is also obliged to:

A. permanent and visible marking of each package of each of the personal protective equipment with the logo of the European Union flag together with a statement on the method of financing: "Funded by the European Union", the template of which is Appendix No. 1A to the Terms of Use – "Logo Template", subject to:

a. dimensions of the EU flag – the dimensions of the EU flag may not be smaller than:

10.5 cm (height) x 16 cm (width), with an appropriately visible statement on the method of financing,

1 cm (height), with a suitably visible statement on the method of financing – for packaging with dimensions less than or equal to 21 cm x 29.7 cm,

b. the necessity to maintain the proportions of the logotype and the statement on the method of financing in relation to each other,

c. the necessity to maintain the proportions of the logotype and the statement on the method of financing in relation to the packaging – clear visibility of the marking,

d. the necessity to maintain the colour scheme of the logotype and the statement on the method of financing (compliance with the template),

e. The Contracting Authority allows the packaging of personal protective equipment to be labelled with stickers, stickers and similar materials if they ensure a permanent bond with the packaging of the personal protective equipment

f. The Contracting Authority allows the marking of the collective packaging of personal protective equipment only if the personal protective equipment is packaged by the manufacturer, i.e. when the personal protective equipment packed in a unit package is usually transported in a collective packaging. In particular, the Contracting Authority does not allow the combination of individual packages into collective packages or collective packages customarily packaged by the manufacturer into larger collective packages (packages "packaged" by the Contractor) in order to avoid the obligation of the Contractor to label each unit and/or collective packaging of personal protective equipment,

B. provide the Contracting Authority with a quality guarantee for the personal protective equipment supplied at least until 31 December 2026, under which the Contractor will be obliged to:

a. removal of defects and defects of personal protective equipment,

b. carrying out or ensuring periodic inspections of personal protective equipment or its individual components, as required and/or recommended by the manufacturer, including to ensure ongoing (during the period of operation) and/or periodic (in particular during or as a result of periodic inspection) replacement and/or replenishment of consumables and/or replacement parts,

at the sole expense of the Contractor and under the conditions set out in Appendix 2H to the Terms of Use – "Draft Contractual Provisions",

C. conducting a one-day training in the operation, maintenance and use of the provided personal protective equipment for not less than 6 and not more than 9 employees of the Ordering Party or other persons designated by the Ordering Party,

3. A detailed description of the subject matter of the contract, in particular the specification of the technical and functional parameters of the subject matter of the contract, with a detailed division into Parts, is attached as Appendix No. 1 to the Terms of Reference – "Description of the subject matter of the contract".

4. The terms and conditions of performance of the subject matter of the contract are specified in Appendix No. 2H to the Terms of Reference – "Draft contractual provisions".

1. The subject of the contract in Lot 9 is the delivery of:

a. RD 40 A2B2E2K2-P3 filter absorbers in the amount of 40,000 pieces,

b. RD 40 PF10-P3 filters in the amount of 40,000 pieces,

in accordance with the technical specification specified in Appendix 1 to the Terms of Reference – "Description of the subject matter of the contract".

2. Regardless of the service consisting in the provision of personal protective equipment referred to in paragraph 1 above, the Contractor is also obliged to:

A. permanent and visible marking of each package of each of the personal protective equipment with the logo of the European Union flag together with a statement on the method of financing: "Funded by the European Union", the template of which is Appendix No. 1A to the Terms of Use – "Logo Template", subject to:

a. dimensions of the EU flag – the dimensions of the EU flag may not be smaller than:

10.5 cm (height) x 16 cm (width), with an appropriately visible statement on the method of financing,

1 cm (height), with a suitably visible statement on the method of financing – for packaging with dimensions less than or equal to 21 cm x 29.7 cm,

b. the necessity to maintain the proportions of the logotype and the statement on the method of financing in relation to each other,

c. the necessity to maintain the proportions of the logotype and the statement on the method of financing in relation to the packaging – clear visibility of the marking,

d. the necessity to maintain the colour scheme of the logotype and the statement on the method of financing (compliance with the template),

e. The Contracting Authority allows the packaging of personal protective equipment to be labelled with stickers, stickers and similar materials if they ensure a permanent bond with the packaging of the personal protective equipment

f. The Contracting Authority allows the marking of the collective packaging of personal protective equipment only if the personal protective equipment is packaged by the manufacturer, i.e. when the personal protective equipment packed in a unit package is usually transported in a collective packaging. In particular, the Contracting Authority does not allow the combination of individual packages into collective packages or collective packages customarily packaged by the manufacturer into larger collective packages (packages "packaged" by the Contractor) in order to avoid the obligation of the Contractor to label each unit and/or collective packaging of personal protective equipment,

B. provide the Contracting Authority with a quality guarantee for the personal protective equipment supplied at least until 31 December 2026, under which the Contractor will be obliged to:

a. removal of defects and defects of personal protective equipment,

b. carrying out or ensuring periodic inspections of personal protective equipment or its individual components, as required and/or recommended by the manufacturer, including to ensure ongoing (during the period of operation) and/or periodic (in particular during or as a result of periodic inspection) replacement and/or replenishment of consumables and/or replacement parts,

at the sole expense of the Contractor and under the conditions set out in Appendix 2I to the Terms of Reference – "Draft Contractual Provisions",

C. conducting a one-day training in the operation, maintenance and use of the provided personal protective equipment for not less than 6 and not more than 9 employees of the Ordering Party or other persons designated by the Ordering Party,

3. A detailed description of the subject matter of the contract, in particular the specification of the technical and functional parameters of the subject matter of the contract, with a detailed division into Parts, is attached as Appendix No. 1 to the Terms of Reference – "Description of the subject matter of the contract".

4. The terms and conditions of performance of the subject matter of the contract are set out in Appendix No. 2I to the Terms of Reference – "Draft Contractual Provisions".