Waste collection and management services divided into 3 tasks. TASK I

PART 1 Wastes of code 19 12 12 fraction over 80 mm — Other wastes

Part 2 wastes of code 19 12 12 - Other wastes (including mixed substances and objects) from the mechanical treatment of waste other than those mentioned in 19 12 11

Exercise 2 - Waste code 19 05 03

Exercise 3 - Waste code 19 05 99

Part 1

1. Collection and management of waste received by the Contractor from the Ordering Party with code 19 12 12 fraction over 80 mm – other waste (including mixed substances and objects) from mechanical treatment of waste other than those listed in 19 12 11, in the recovery process as a component of alternative fuel. Waste code 19 12 12 is prepared in bales or in bulk.

2. The place of collection of waste intended for transport and management is the area of the Municipal Installation, located in the Waste Segregation and Management Plant in Wałbrzych,

Beethoven 43.

3. Collection of waste in vehicles adapted for this purpose will take place by transport organized by the Contractor and at his expense. The selection of the type of transport unit for a given batch of waste will be determined each time by e-mail by the representative of the Ordering Party and the representative of the Contractor.

4. The Contractor undertakes to comply with the Act of 11 January 2018 on electromobility and alternative fuels, including ensuring a total share of at least 10% of electric vehicles or vehicles powered by natural gas in the fleet of motor vehicles within the meaning of Article 2 point 33 of the Act of 20 June 1997 - Road Traffic Law used in the performance of the task, pursuant to Article 68(3) of the Act of 11 January 2018 on electromobility and alternative fuels (Journal of Laws of 2021, item 110, as amended), taking into account any changes to this provision, consisting in changing the required share.

5. The Contractor is obliged to collect approx. 50 Mg of waste on all working days, from Monday to Friday, from 7:00 to 14:00 every day.

6. Weighing of waste collected by the Contractor will take place on the legalized scale of the Ordering Party located on the premises of the Waste Segregation and Management Plant, in Wałbrzych, at 43 Beethovena Street. The collected waste will be weighed on a legalized truck scale,

with an accuracy of 20 kg. To determine the weight of the waste to be collected, the Contractor's vehicle must be weighed before loading. The above weight will be binding for settlements between the parties.

7. Weighing shall be confirmed at each time by weight.

8. Settlement for waste collection will take place on the basis of confirmed KPO in the BDO system for the month in which the service was performed, which are the sum of the masses indicated in the weight receipts for a month,

in which the service was performed.

9. Loading waste on vehicles substituted by the Contractor is the responsibility of the Ordering Party.

10. The estimated amount of waste with code 19 12 12 to be collected shall be:

- Approx. 6,000 Mg during the term of the contract

- Approx. 50 mg/day

11. The Ordering Party reserves the right to change the amount of waste. The amount of waste can be reduced no more than

by 20% or increase, according to the needs of the Ordering Party. A change in the amount of waste results in a change in the Final Remuneration of the Contractor. Failure to complete the entire scope of the contract may not give rise to any claims on the part of the Contractor against the Ordering Party.

12. Collection will take place by transport organized by the Contractor and at his expense, also in terms of transport costs, insurance for transport and unloading.

13. The Contractor and the waste transporter indicated by him and the recipient of this waste must be entered in the BDO (Waste Database) as part of their business. Unanimously

in accordance with the applicable regulations, the Ordering Party issues a KPO (Waste Transfer Card) via BDO according to the data concerning the Waste Transporter and The Recipient, indicated by the Contractor on the occasion of sending an e-mail notification of receipt of each batch of waste.

14. Each batch of waste for collection shall be reported by the Ordering Party to the Contractor by phone or e-mail at the latest

on the day preceding the receipt, specifying: the hours of readiness to receive the waste, the number of transports, as well as the form of preparation of the waste. (...)

Part 2

1. Collection and management of waste received by the Contractor from the Ordering Party with code 19 12 12 (bulky waste) – other waste (including mixed substances and objects) from mechanical treatment of waste other than those listed in 19 12 11, in the recovery process as a component of alternative fuel. Waste with code 19 12 12 (bulk waste) prepared in bulk (not baled, unground).

2. The place of collection of waste intended for transport and management is the area of the Municipal Installation, located in the Waste Segregation and Management Plant in Wałbrzych,

Beethoven 43.

3. The Contractor undertakes to comply with the Act of 11 January 2018 on electromobility and alternative fuels, including ensuring a total share of at least 10% of electric vehicles or vehicles powered by natural gas in the fleet of motor vehicles within the meaning of Article 2 point 33 of the Act of 20 June 1997 - Road Traffic Law used in the performance of the task, pursuant to Article 68(3) of the Act of 11 January 2018 on electromobility and alternative fuels (Journal of Laws of 2021, item 110, as amended), taking into account any changes to this provision, consisting in changing the required share.

4. Collection of waste in vehicles adapted for this purpose will take place by transport organized by the Contractor and at his expense. The selection of the type of transport unit for a given batch of waste will be determined each time by e-mail by the representative of the Ordering Party and the representative of the Contractor.

5. The Contractor is obliged to collect the waste in question on working days, from Monday to Friday,

from 7:00 to 14:00, on days previously indicated by the Ordering Party, in accordance with point 14 of this description of the subject of the order.

6. Weighing of waste collected by the Contractor will take place on the legalized scale of the Ordering Party located on the premises of the Waste Segregation and Management Plant, in Wałbrzych, at 43 Beethovena Street. The collected waste will be weighed on a legalized truck scale,

with an accuracy of 20 kg. To determine the weight of the waste to be collected, the Contractor's vehicle must be weighed before loading. The above weight will be binding for settlements between the parties.

7. Weighing shall be confirmed at each time by weight.

8. Settlement for waste collection will take place on the basis of confirmed KPO in the BDO system for the month in which the service was performed, which are the sum of the masses indicated in the weight receipts for a month,

in which the service was performed.

9. Loading waste on vehicles substituted by the Contractor is the responsibility of the Ordering Party.

10. The estimated amount of waste with code 19 12 12 (bulky waste) to be collected shall be:

- Approx. 600 Mg during the term of the contract

- Approx. 25 mg/week

11. The Ordering Party reserves the right to change the amount of waste. The amount of waste can be reduced no more than

by 20% or increase, according to the needs of the Ordering Party. A change in the amount of waste results in a change in the Final Remuneration of the Contractor. Failure to complete the entire scope of the contract may not give rise to any claims on the part of the Contractor against the Ordering Party.

12. Collection will take place by transport organized by the Contractor and at his expense, also in terms of transport costs, insurance for transport and unloading.

13. The Contractor and the waste transporter indicated by him and the recipient of this waste must be entered in the BDO (Waste Database) as part of their business. Unanimously

in accordance with the applicable regulations, the Ordering Party issues a KPO (Waste Transfer Card) via BDO according to the data concerning the Waste Transporter and The Recipient, indicated by the Contractor on the occasion of sending an e-mail notification of receipt of each batch of waste.

(...)

1. Collection and management of waste received by the Contractor from the Ordering Party with the code 19 05 03 (fraction 0-20 mm) – compost that does not meet the requirements (unsuitable for use). Waste arising

as a result of sieving the stabilizate using a drum screen with a sieve mesh of 20 mm – in D13. Waste

code 19 05 03 are prepared in the form "in bulk".

2. The place of collection of waste intended for transport and disposal is the area of the Municipal Installation, located in the Waste Segregation and Management Plant in Wałbrzych,

43 Beethovena Street, and the area of the Landfill at Beethovena Street in Wałbrzych.

3. The Contractor undertakes to comply with the Act of 11 January 2018 on electromobility and alternative fuels, including ensuring a total share of at least 10% of electric vehicles or vehicles powered by natural gas in the fleet of motor vehicles within the meaning of Article 2 point 33 of the Act of 20 June 1997 - Road Traffic Law used in the performance of the task, pursuant to Article 68(3) of the Act of 11 January 2018 on electromobility and alternative fuels (Journal of Laws of 2021, item 110, as amended), taking into account any changes to this provision, consisting in changing the required share.

4. Collection of waste in vehicles adapted for this purpose will take place by transport organized by the Contractor and at his expense. The selection of the type of transport unit for a given batch of waste will be determined each time by e-mail by the representative of the Ordering Party and the representative of the Contractor.

5. The Contractor is obliged to collect the waste in question on working days, from Monday to Friday,

from 7:00 to 14:00, on days previously indicated by the Ordering Party, in accordance with point 13 of this description of the subject of the order.

6. Weighing of waste collected by the Contractor will take place on the legalized scale of the Ordering Party located on the premises of the Waste Segregation and Management Plant, in Wałbrzych, at 43 Beethovena Street. The collected waste will be weighed on a legalized truck scale,

with an accuracy of 20 kg. To determine the weight of the waste to be collected, the Contractor's vehicle must be weighed before loading. The above weight will be binding for settlements between the parties.

7. Weighing shall be confirmed at each time by weight.

8. Settlement for waste collection will take place on the basis of confirmed KPO in the BDO system for the month in which the service was performed, which are the sum of the masses indicated in the weight receipts for a month,

in which the service was performed.

9. Loading waste on vehicles substituted by the Contractor is the responsibility of the Ordering Party.

10. The estimated amount of waste with code 19 05 03 to be received shall be 5700 Mg:

(a) from the area of the Municipal Installation:

- Approx. 4 500 Mg during the term of the contract

- Approx. 200.00 Mg/week

b) from the area of the Landfill:

- Approx. 1,200 Mg during the duration of the contract

- Approx. 50 Mg/week

11. The Ordering Party reserves the right to change the amount of waste. The amount of waste can be reduced no more than

by 20% or increase, according to the needs of the Ordering Party. A change in the amount of waste results in a change in the Final Remuneration of the Contractor. Failure to complete the entire scope of the contract may not give rise to any claims on the part of the Contractor against the Ordering Party.

12. Collection will take place by transport organized by the Contractor and at his expense, also in terms of transport costs, insurance for transport and unloading.

13. The Contractor and the waste transporter indicated by him and the recipient of this waste must be entered in the BDO (Waste Database) as part of their business. Unanimously

in accordance with the applicable regulations, the Ordering Party issues a KPO (Waste Transfer Card) via BDO according to the data concerning the Waste Transporter and The Recipient, indicated by the Contractor on the occasion of sending an e-mail notification of receipt of each batch of waste (...)

1. Collection and management of waste received by the Contractor from the Ordering Party with the code 19 05 99 (fraction 20-80 mm) – other unlisted waste (stabilizate). Waste arising

as a result of sieving the stabilizate using a drum screen with a sieve mesh of 20 mm – in D13. Waste

code 19 05 99 are prepared in the form "in bulk".

2. The place of collection of waste intended for transport and disposal is the area of the Municipal Installation, located in the Waste Segregation and Management Plant in Wałbrzych,

43 Beethovena Street, and the area of the Landfill at Beethovena Street in Wałbrzych.

3. The Contractor undertakes to comply with the Act of 11 January 2018 on electromobility and alternative fuels, including ensuring a total share of at least 10% of electric vehicles or vehicles powered by natural gas in the fleet of motor vehicles within the meaning of Article 2 point 33 of the Act of 20 June 1997 - Road Traffic Law used in the performance of the task, pursuant to Article 68(3) of the Act of 11 January 2018 on electromobility and alternative fuels (Journal of Laws of 2021, item 110, as amended), taking into account any changes to this provision, consisting in changing the required share.

4. Collection of waste in vehicles adapted for this purpose will take place by transport organized by the Contractor and at his expense. The selection of the type of transport unit for a given batch of waste will be determined each time by e-mail by the representative of the Ordering Party and the representative of the Contractor.

5. The Contractor is obliged to collect the waste in question on working days, from Monday to Friday,

from 7:00 to 14:00, on days previously indicated by the Ordering Party, in accordance with point 13 of this description of the subject of the order.

6. Weighing of waste collected by the Contractor will take place on the legalized scale of the Ordering Party located on the premises of the Waste Segregation and Management Plant, in Wałbrzych, at 43 Beethovena Street. The collected waste will be weighed on a legalized truck scale,

with an accuracy of 20 kg. To determine the weight of the waste to be collected, the Contractor's vehicle must be weighed before loading. The above weight will be binding for settlements between the parties.

7. Weighing shall be confirmed at each time by weight.

8. Settlement for waste collection will take place on the basis of confirmed KPO in the BDO system for the month in which the service was performed, which are the sum of the masses indicated in the weight receipts for a month,

in which the service was performed.

9. Loading waste on vehicles substituted by the Contractor is the responsibility of the Ordering Party.

10. The estimated amount of waste with code 19 05 99 to be collected shall be:

- Approx. 3 200 Mg during the term of the contract

- Approx. 60.00 mg/week

11. The Ordering Party reserves the right to change the amount of waste. The amount of waste can be reduced no more than

by 20% or increase, according to the needs of the Ordering Party. A change in the amount of waste results in a change in the Final Remuneration of the Contractor. Failure to complete the entire scope of the contract may not give rise to any claims on the part of the Contractor against the Ordering Party.

12. Collection will take place by transport organized by the Contractor and at his expense, also in terms of transport costs, insurance for transport and unloading.

13. The Contractor and the waste transporter indicated by him and the recipient of this waste must be entered in the BDO (Waste Database) as part of their business. Unanimously

in accordance with the applicable regulations, the Ordering Party issues a KPO (Waste Transfer Card) via BDO according to the data concerning the Waste Transporter and The Recipient, indicated by the Contractor on the occasion of sending an e-mail notification of receipt of each batch of waste.

14. Each batch of waste for collection shall be reported by the Ordering Party to the Contractor by phone or e-mail at the latest on the day preceding the collection, specifying: the hours of readiness for collection (...)