Ventilation and refrigeration technology
The building plot measures around 17,000m² and is located in the immediate
Neighbourhood to the disposal center “Old Ski Jump” in 33106 Paderborn.
A.V.E's own company in the district of Paderborn builds the
New construction of the central district building yard.
This is a building complex consisting of several buildings
different uses. The buildings have an approximate
GFA of approx. 4,000 m² plus necessary ancillary areas and outdoor facilities.
All of them were built before construction began. Removes construction loads and paved up construction roads.
There are various newly installed pipelines on the building plot.
Building description:
The district building yard is divided into six components:
- Social area/administration (VW)
- workshop (WE)
- Vehicle hall (FH)
- salt hall (SA)
- Heating centre/carport (CA)
- outdoor area (AL)
The administration building will be built on two floors, partly in timber construction.
The façade will be covered with a thermal insulation façade.
Ventilation and refrigeration technology
Additional technical contract conditions for ventilation and refrigeration
Additions to the general technical
Contractual terms of VOB part C:
1 Laws-regulations-guidelines-technical regulations
For the creation of ventilation and refrigeration systems and all related to them
performances that occur are the (applicable) following technical
Rules Contract basis:
- the legal regulations
- the technical regulations that document the current state of the art
(EN, DIN, VDI, VDE, DVGW-TRGI, etc.)
- accident prevention regulations, in particular those of professional associations
and the Workplace Ordinance
- Any technical notes accompanying the call for tenders
Particular attention should be paid to:
VOB/C ATV DIN 18299 “General regulations for all types of construction work”,
VOB/C ATV of the respective trade
DIN 18202 “Tolerances in building construction - structures”,
Ventilation systems
DIN 1946 (4,6,7) “Room ventilation technology — Ventilation systems and ventilation
of apartments (additional additional supplementary sheets)”
DIN 4719 “Ventilation of apartments — requirements, performance tests and
Identification of ventilation units”
DIN 18017-3 “Ventilation of bathrooms and toilets without external windows —
Part 3; Ventilation with fans”
DIN EN 779 “Particulate air filters for general air technology - Determination of
Filter performance”
DIN EN 1505 “Ventilation of buildings — air ducts and fittings made of
Sheet metal with rectangular cross-section — dimensions”
DIN EN 1506 2 “Ventilation of buildings — air ducts and fittings made of
Sheet metal with round cross-section — dimensions”
DIN EN 12097 “Ventilation of buildings — air lines — requirements for air line components
for maintenance of air line systems”
DIN EN 12236 “Ventilation of buildings — suspensions and supports for air lines
— Strength Requirements”
DIN EN 12237 “Ventilation of buildings — air ducts — strength and tightness
of air ducts with a round cross-section made of sheet metal”
DIN EN 12599 “Ventilation of buildings — test and measurement procedures for handover
Ventilation systems”
DIN EN 12792 “Ventilation of buildings — symbols, terminology and graphics
Symbols”
DIN EN 13053 “Ventilation of buildings — Central ventilation devices —
Performance data for devices, components and assemblies”
DIN EN 13141 (2,9,10) “Ventilation of buildings — performance testing of parts/products for apartment ventilation”
DIN EN 13779 “Ventilation of non-residential buildings — general Basics and requirements
for ventilation and air conditioning systems and room cooling systems”
DIN EN 14134 “Ventilation of buildings — performance testing and installation checks
of ventilation systems of apartments”
DIN EN 14240 “Ventilation of buildings — chilled ceilings — testing and evaluation”
DIN EN 15726 “Ventilation of buildings — air distribution — measurements in residential areas
of air conditioned/ventilated rooms for the evaluation of thermal
and acoustic conditions”
DIN EN 15780 “Ventilation of buildings — air ducts — cleanliness of ventilation systems”
VDI 2050 (1.4) “Requirements for technology centers”
VDI 2052,2053,2054 “Ventilation systems for: kitchens, garages, data processing”
VDI 2067 (1,10.21) “Cost-effectiveness of building services systems”
VDI 2073 (1.2) “Hydraulic circuits in heating and ventilation technology
Plants”
VDI 2078 “Calculation of the cooling load and room temperatures of rooms and
Buildings (VDI cooling load rules)”
VDI 3803 (1,4,5) “Room ventilation technology — central ventilation systems, device requirements
(VDI ventilation rules)”
VDI 3819 (1-3) “Fire protection in building services engineering”
VDI 6022 (1,3,4,6) “Room air technology, indoor air quality — hygiene requirements,
Humidification (VDI ventilation rules)”
MLAR “Planning and execution of air conditioning systems for public
Buildings”
LuEar “Ventilation System Directive”
For more information, see specifications in the tender documentation (C documents)