The object of the order is a comprehensive maintenance and restaurant and recreation of the necessary elements of the furnishings of the cemeteries together with fences including: maintenance and reconstruction of stone elements, including walls and fence posts, monument plinths, monuments, tombstones and tombstone stelae; maintenance and reconstruction of concrete elements, including walls and fence posts, wall and pillars, monuments, tombstones and tombstones, pedestals under crosses and monuments, staircases and fence undermurs; maintenance and reconstruction of wooden elements, including staircases and fence panels, shingle canopies, chapels, tombstone crosses, central crosses; maintenance and reconstruction of metal elements, including fence panels, canopies and offsets of wooden crosses, tombstone crosses (cast iron and forged), cast iron memorative plaques; execution and installation enameled memorative plates; historical signposts with numbers with cemetery numbers.

Implementation of the work on the basis of the Conservation Permit No. 113/2016 of 11 April 2016 and Decision amending No 38/2019 of 7 February 2019. The scope of work in accordance with the programme of restoration of cars. Mark Sawicki from November 2015

and the Historical and Recreation Documentation of the cars. Izabeli Chlost and George Drogomir's 2019 cemetery completely transformed, the existing pieces of equipment are secondary and incorrect in historical terms. To recreate is the fence of the cemetery - according to historical and recreation documentation. Construction elements and shingle covering made of larch wood. Partly for preservation remains a stone underwall and fence posts with the necessary scope of remasonry and reconstruction and stone steps in the entrance. The stone plinth preserved in the cemetery is a fragment of a plinth under an unpreserved wooden central cross and requires maintenance and superstructure according to the documentation. The central cross made of larch wood is to be recreated according to the materials of the archival project included in the documentation. Correctly made identical cross (original) is currently located in cemetery number 56 in Smerekowiec. The layout of 14 graveyards in the cemetery shall be designated in accordance with Annex No 1 of the recreation documentation by making them in the form of small embankments surrounded by sandstone slabs (flat stones) of the appropriate height — a length of stone edging about 195 m2 for recreation and assembly according to The documentation is all larch wood crosses in two sizes and two types: 7 large crosses including 1 “Latin” and 6 “Russian”, 6 minor crosses including 4 “Latin” and 2 “Russian” and 2 sandstone stelae to be set on mogile No. 11. secured with titanium zinc sheet molding and mounted to coasters sunk in concrete alloys. For making and mounting on crosses 7 round enamel plates (d. 19 cm), 6 enamel plates of diameter 15 cm and 2 rectangular (21 x 27 cm) to be mounted on stone stelas — 15 tablets together.

Implementation of the work on the basis of the Conservation Permit No. 135/2016 of 11 April 2016 and amending Decision No 39/2019 of 11 February 2019. The scope of work in accordance with the programme of restoration works of cars. Mark Sawicki from November 2015

For preservation, stone masonry and fence posts with concrete covers. Wooden elements of the fence together with the wicket to be recreated in historical form according to the archival photo, it is assumed to restore the historical location of the wicket, which is associated with the displacement of 3 stone pillars of the fence (execution on new foundations with maximum the use of material from stripping poles). The placement of crosses and their types should follow the recreation plan, from which the actual quantity and types of crosses will result. Existing frames require partial translation and replenishment in accordance with the recreation plan — approximately 200 m.b. Recreation documentation the Ordering Party will provide by the end of 2021. On the basis of archival documents, it is assumed that in the ordered fields should be provided by the end of 2021. placed 10 cast-iron crosses on concrete plinths, including: 2 large type U and (preserved for maintenance), 7 pcs. Type (6 preserved and 1 to be reconstitated), 1 type A (to be reconstituting). Concrete pedestals under the crosses of and A should be made as replicas, they should have a finishing layer imitating stonework with a trail and peeling. It is advisable to recover, as far as possible, cast iron crosses from existing pedestals intended to be replaced with new ones. The wooden central cross is to open according to the archive design and the design of the cars. Konrad Kochański included in the program of restoration work. It should be modeled on the cross set in cemetery number 66 in Małastów or cemetery number 76 in Siary. For the manufacture and installation of 10 enamel plates. The actual number of plates will result from the recreation documentation provided by the Ordering Party containing array patterns.

Implementation of the work on the basis of the Conservation Permit No. 115/2016 of 11 April 2016 and the Amending Decision No 30/2019 of 7 February 2019. The scope of work in accordance with the programme of maintenance of cars. Mark Sawicki from November 2015 and archival documentation. The layout of the cables should be checked with the archive plan and made the necessary adjustments. For preservation: the wall of the fence, together with poles and undermural — these elements must be removed from the splitting layers of plaster and, in accordance with the programme of restoration work, the possibility of exhibiting the stone thread, which will require a significant degree of additions ( an alternative option will be to complement the mold and make new plasters) — po. elements of total approx. 320 m2; stone plinth under the central cross — pow. approx. 20 m2 with the necessary lifting of ½ layers; stone tombstones (stelae) — 6 pcs.; concrete plinths under the crosses with the necessary improvement of their mounting to unify the height and setting in the row (it is allowed with the consent of the conservation services to make new ones, assuming the recovery of crosses mounted in them) — 50 pcs; forged crosses with the necessary scope of reconstruction according to historical designs — 50 pcs including 46 T type and 4 type. For recreation: wooden fence elements (approx. 60 m2) including wicket according to archival documentation; wooden central cross according to archival design and car design. Konrad Kochański, annexed to the Programme of restoration works (should be modeled on the cross set in graveyard number 66 Małastów or No. 76 Siara) .For execution and assembly: 56 tin enamel tablets round with a diameter of 15 cm according to the designs which the Ordering Party will provide by the end of 2021; Concrete curbs designating the outline of the gray — bottom. approx. 250 m2, to be made as planned; marble plaque (gray marble) with dimensions adjusted to the size of the cavity with inscription (61 letters) of content:

BRUST GEGEN

BRUST HABEN

VORTEX GERUNGEN,

HAND IN HAND

VERDEN WHIRLWIND

AUFERSTEHEN.

Shade of stone, type of letters, their size and arrangement of verses to be agreed with the Ordering Party. Note: in the cemetery, the original enamel plates are preserved in relatively good condition, which must be carefully dismantled and given to the Ordering Party.

Implementation of the work on the basis of the Conservation Permit No. 121/2016 of 11 April 2016 and the amending decision of 7 February 2019. The scope of work in accordance with the programme of maintenance of cars. Mark Sawicki from November 2015 and historical and recreation documentation of cars. George Drogomir from 2011. For preservation: stone wall fence with concrete covers and necessary structural safeguards — 55 m2 (height on the inner side approx. 0.9 m, on the outer side approx. 1.6 m, width of the covers approx. 0.6 m); stone monument in the shape of a cross built with stone punches — pow. approx. 35 m2; stone staircase — kpl. (22 steps and landings); concrete pedestals under crosses along with recreation of missing ones — total to be 14 pcs; cast iron crosses of type M along with recreation of missing ones - the target should be 12; forged crosses of the type Λ (are preserved, in the event need to be reconstituted) — 2 pcs. For the execution and installation of 14 round enamel plates with a diameter of 15 cm. For the implementation of the layout of the cemetery: the borders of the alley leading from the entrance to the central place and the outline of the place - stone curbs — approximately 25 m.b.; the formation of the graves into the form of mounds of approx. 20 cm covered by flat stones dug vertically (whereby 105 must be form one common mound). To recreate the wooden wicket according to historical and recreation documentation.

Implementation of the work on the basis of the Conservation Permit No. 114/216 of 11 April 2016 and the amending Decision of 11 February 2019. The scope of work in accordance with the programme of maintenance of cars. Mark Sawicki from November 2015 and historical and recreation documentation of cars. George Drogomir's 2013 for preservation: stone pylons of fencing 26 pcs with concrete covers — most will require demolition and new construction; metal fencing pipes spanned in two rows — length approx. 165 m2; large concrete plinths under crosses type 2; concrete plinths under concrete plinths under M-type crosses, which are likely to be replaced with replicas (when performing replicas, be sure to finish the surface with stonework); pebbles included in trailstrips - pcs. 6; concrete plinths under crosses of type with the necessary scope of reconstruction — pcs. 9; cast iron gravestone crosses of necessary scope for repairs: type — 2 pcs and type M — 6 pcs and forged crosses of type Λ — pcs. 9. At least 7 tombstones need to be moved to a historically appropriate place (according to the plan of recreation of the cemetery). The wooden central cross with tin canopy is one of two original surviving crosses of this type. Reconstruct the damaged parts and restore the height of the cross according to the archive design. It is allowed to recreate it according to the archival design and the design of the cars. Konrad Kochański annexed to the programme of restoration works while maintaining as many original elements as possible. It should be modeled on the cross set in graveyard number 66 of Malaste or number 76 of Siara. For manufacture and installation: 19 enamel plates, including 13 round diameter 15 cm and 6 oval (vertical) of 19 x 26 cm. On the four tombstones, round plates are mounted on either side of the cross. To be carried out: the framing of quarters and individual cubes with concrete curbs — approximately 155 m.b. It is absolutely necessary to keep visible in the ground of the ground in the form of earth mounds and obtain an equal height of about 20 cm, with these mounds to be shaped “by arch”. Their cross-section is a roller clipping.

Implementation of the work on the basis of the Conservation Permit No. 125/2016 of 11 April 2016 and the amending Decision of 28 January 2019. The scope of work in accordance with the programme of restoration works of cars. Mark Sawicki from March 2016 and historical and recreation documentation of cars. Izabeli Chlost and Jerzy Drogomir from 2009 together with the annex of 2017. For maintenance: stone fence wall — approx. 190 m2; stone plinth under the central cross — approx. 25 m2; concrete wall covers — approx. 62 m2; stone steps before the entrance - kpl. 1; concrete plinths under crosses Type — 10 pcs .; forged crosses of type with necessary repairs - pcs. 10. tombstones require displacement in a historical place according to the recreation plan. To be recreated: wooden central cross; wooden wicket according to projects from recreation documentation. To perform the framing of the path with stone slabs — approx. 105 m.b. and the manufacture and installation of 10 round enamel plates with a diameter of 15 cm.