Delivery of a brand new two-chamber, three-axle CNG car for municipal waste disposal Chassis brand new year of production 2023 year with a permissible total weight of 27 t. Wheelbase max 3750 mm. CNG engine with a maximum capacity of 10 l. EURO6 emission standard. Two-chamber body. Total chamber capacity: min 21 m3, max 23 m3. Chamber capacity min. 13-14 m3 and 8-9 m3. Two separate independent charging devices. Two separate independently working abdomens. Body divided lengthwise by a partition in the proportion of 60/40. Coin lifter with DIN arms for containers 120-1100 liters on the left side and for containers 120-370 l on the right side, Automatic container holder on both lifters. The Contractor, in the price of the offer, shall deliver the vehicle being the subject of this contract to the headquarters of the Contracting Authority Training of designated employees of the Contracting Authority in the operation of the vehicle and the equipment installed in it (theoretical and practical).
CHASSIS
Chassis brand new year of manufacture min. 2023 with a maximum permissible weight of 27 t adapted for garbage truck installation
Vehicle drive system 6 x 2*4 second drive axle, third steering
Wheelbase max 3750 mm
Spring suspension front,air rear
Rear suspension control via remote control and dashboard buttons
Differential lock
Vehicle equipped with disc brakes
ESP detachable traction control system
Technical load capacity of the front axle min 8 000 kg
Technical load capacity of rear suspension min 21 000 kg
Tyres 315/80R22,5 full-size spare wheel
CNG engine with a maximum capacity of 10 l, power min 340 HP and torque min 1600 Nm
EURO6 emission standard
Engine equipped with a power take-off
Fuel tanks with a total capacity of at least 900 l
Automatic or fully automatic transmission without clutch pedal
Anti-descent brake to prevent the vehicle from rolling down hills
Day cabin for 3 people in white.
Electrically operated windows.
Air conditioning.
Electrically adjustable and heated rear-view mirrors.
H7 headlights with LED daytime running lights.
Radio with hands-free system.
Factory immobiliser.
Digital tachograph.
electric socket 12V
The vehicle is equipped with factory anti-bicycle side covers and wheel arches.
Display with on-board computer in Polish.
2 safety wedges, hydraulic jack, tools to operate the vehicle.
Approval for a complete vehicle
Buildings
Two-chamber body. Total chamber capacity: min 21 m3, max 23 m3.
Chamber capacity min. 13-14 m3 and 8-9 m3.
Two separate independent charging devices and abdomens
Body divided lengthwise by a partition in the proportion of 60/40.
Fault detection program with visualization.
Adjustable abdomen locking system.
Sealing around the entire perimeter of the contact between the abdomen and the box.
Crush press equipped with proximity sensors or inductive sensors
Push plate guides located on the sides of the load platform.
Press cylinders with piston rods pointing upwards towards the roof
Bearings lubrication-free presses
Minimum 4 cameras with a viewing angle of 103 degrees each with a color monitor of at least 7" Automatically activated when the ignition is switched on
Continuous welds on the walls of the abdomen and box.
Control panels for press and coin lifters on both sides of the body.
A device with the ability to work in a single cycle.
A device bearing the CE mark.
Lights in accordance with the traffic regulations in force in the Republic of Poland
Anti-bicycle side covers installed.
Work lights in and out of the abdomen.
Two warning lights "roosters"
Coin validator with DIN arms for containers 120-1100 liters on the left side and for containers 120-370 l on the right side, coin lifters lubricated by the central lubrication pump.
Automatic container holder on both lifters.
Both coin validators operated from the same side at the same time.
Coin lifter comb for MGB containers
Abdomen baths made of HBW 450 sheet, min 8 mm, side walls min 6 mm equipped with leachate valves
Abdomen-mounted flash lights
Abdomen opening cylinders located on the roof
LED tail lights
In addition, LED work light mounted on the walls of the abdomen or under the load box and inside the abdomen
Guard for warning light "rooster"
Box floor thickness min. 6 mm, thickness of the side walls of the box min. 4 mm made of structural sheet metal
Broom and shovel attachment on abdomen, right
Inspection door in the side wall of the box
Feet for loaders with sensors
Bag containers mounted on the abdomen on both sides
Primed and varnished in orange
User manual, service and warranty book in Polish
Spare parts catalogue with hydraulic and electrical system diagram in English
Mobile service package with materials 24 months