The subject of the contract is the delivery of a new compactor designed for thickening waste with a plowshare. The machine was produced not earlier than 2002 and after a complete reconstruction carried out no earlier than 2023. Machine after reconstruction with a mileage of max 20 Mth resulting from the technology of reconstruction or storage of the compactor. The offered machine cannot be a prototype.

The subject of the contract is the delivery of a new compactor designed for thickening waste with a plowshare. The machine was produced not earlier than 2002 and after a complete reconstruction carried out no earlier than 2023. Machine after reconstruction with a mileage of max 20 Mth resulting from the technology of reconstruction or storage of the compactor. The machine offered cannot be a prototype.2. Technical description of the minimum parameters of the compactor. 1) Machine manufactured not earlier than in 2002 - completely rebuilt in 2023. 2) The machine cannot be a prototype, 3) New or regenerated engine – without mileage (permissible mileage resulting from the engine production technology or resulting from tests while the machine is moving during reconstruction), 4) Regeneration performed on original parts of the engine manufacturer, 5) 6-cylinder diesel engine with direct fuel injection and turbocharging, 6) Engine power of not less than 320 kW, 7) Blade width minimum 3.7 m; 8) Total length minimum 8.0 m, 9) Weight of the compactor with accessories ready for operation: 36000 - 40000 kg, 10) Hydrostatic drive for 4 wheels (each driven independently), 11) Tank capacity min. 400 l, 12) Steel wheels with spikes, 13) Outer diameter of kneading wheels minimum 1.6 m, 14) 24V electrical system, 15) Maintenance-free batteries, 16) Central lubrication system, 17) Working lamps front and rear of the vehicle – minimum 2 pieces, 18) Reverse warning signal,

19) Orange warning light, 20) Rear view camera, 21) Joystick blade operation, 22) Hour meter, 23) Heated cab + air conditioning, 24) Lockable cab door, 25) Cab - ROPS (roll-over protection) protective structure, 26) Control panel with clear operating indicators and indicators, 27) Exterior mirrors on both sides of the cab, 28) Windscreen and rear windscreen wipers, 29) Radio with speakers, 30) Horn, 31) Suspension operator's seat, 32) The scope of machine reconstruction consisting in complete disassembly of the machine, verification and regeneration of individual components:

• engine regeneration,

• regeneration of hydraulic pumps of the driving system,

• regeneration of pumps of the working system,

• regeneration of pump drive reducer,

• regeneration of hydraulic motors of the driving system,

• regeneration of driving transmissions,

• regeneration of hydraulic cylinders,

• regeneration of the kinematic system of connecting the front and rear frames,

• fully operational electrical installation,

• replacement of hydraulic lines with new ones,

• blade regeneration – replacement of blades, pins, bearings,

• repair of the operator's cabin,

• replacement of the hydraulic thermostat,

• regeneration of the hydraulic controller,

• regeneration of the hydraulic distributor,

• replacement of overlays and road wheel protections,

• cleaning the fuel tank and oil,

• comprehensive renewal of the varnish coating.

Description included in the list - minimum parameters required by the Contracting Authority contains the minimum parameters (technical and functional) to be met by the offered compactor, which means that the Contractor may offer the subject of the contract characterized by better technical and/or functional parameters.