The assignment includes inspection, repair and maintenance service of the frigate F363 Niels Juel. The assignment includes inter alia docking and bottom inspection, a start-up of Class Renewal Survey, exterior painting, repair and maintenance work on the hull and accommodation quarters, as well as general inspection, maintenance and repair work of the vessel's mechanical and electrical systems and components. In addition to the services already specified, the Supplier shall furthermore accept to perform further services on the vessel if needs for additional repairs, etc. are identified by DALO during inspections, and if ordered by DALO.

The ship's main data:

A) Steel ship;

B) Overall length: 138,70 m;

C) Length p.p.: 125,00 m;

D) Width ma.x: 19,75 m;

E) Draught lower edge of the hull: 4,98 m;

F) Draught lower edge of the sonar: 5,86 m;

G) Draught lower edge of the propeller: 6,11 Displacement v. 5,31 m.: 6 645 tons.

The following must be observed when docking:

A) No support in sonar range (from sp. 154 to sp. 171);

B) Lower edge of sonar dome is 1 012 mm below baseline (BL);

C) Minimum 17,2 m. free space aft of sp. 0 to 200 mm below the BL for placement of axles must be ensured. Max. extension of the stabilizer wings 11 975 m. from the center line.

The ship is available during the period 3.10.2016-21.10.2016.

DALO is expecting to dispatch invitations to participate to selected candidates on the 23.6.2016. DALO is furthermore expecting to organize an Inspection Meeting (‘Bidders Conference’) on Wednesday, 6.7.2016, which will be held for all tenderers on board the frigate F363 Niels Juel at Naval base Korsoer, Sylowsvej 8, DK-4200 Korsoer, cf. Section VI.3)