Supply of a new 150 q.li wheeled excavator with rear blade and penetrator arm between 2 450 and 3 500 mm long, approved for road circulation with mounted bucket.

The supply must comply with the requirements of the Technical Specifications with particular reference to the minimum technical characteristics required, in addition to those offered during the tender.

In the execution of the contract, the winning Economic Operator must, in any case, comply with the technical and safety features required by current legislation.

The Consortium reserves the option, which can be exercised at its own discretion within twelve months from the delivery of the first vehicle, to request the supply of another excavator with similar characteristics and equipment: this option can be exercised twice.

See Tender Regulations and Technical Specifications

Mandatory technical features:

a) ISO 14396 gross engine power between 90-110 kW;

b) Operating weight not less than 15 000 kg (indicate the weight of the vehicle offered);

c) Diesel engine no or 4 cylinders with non-inferior displacement to 4.000 l;

d) Engine complying with current legislation concerning pollutant emissions in air STAGE IV, Directive 97/68 / EC and subsequent amendments;

e) Wagon with transmission with translation speed between 0 and 35 km / h and the front axle with manual or automatic lock, traction force between 70 - 90 kN;

f) Rotation system with torque between 30–50 KNm, rotation speed between 9–12 rpm;

g) Independent ROPS / FOPS cabin, in compliance with current legislation on noise and safety (ISO 12117-2);

h) Air conditioner, radio system and immobilizer;

i) Minimum rear turning radius between 1 720 and 1 850 mm, maximum overall width 2 550 mm;

j) Maximum outreach to ground not lower than 8 250 mm measured from the fifth wheel center to the bucket pin without quick connection (specify in mm the length of the maximum outreach on the ground of the vehicle offered);

k) Automatic centralized greasing system;

l) Specify the maximum breakout force at the forearm with the machine in normal position and forearm offered according to the ISO 6015 standard expressed in kN;

m) Rear and side camera with view of the monitor in the cabin;

n) Front, rear and flashing headlights mounted on the cab, headlights on the boom for using the vehicle even during night work;

o) Arm with triple articulation;

p) Equipment with twin wheels and rear blade;

q) The arms must be fitted with hydraulic lines until the end of the penetrator arm complete with: hydraulic quick coupler with anti-release pins, 2-way line with a minimum flow rate of 50 l / min suitable for the operation of the cutter bar, while ensuring normal operation functionality of the excavator arm, double-acting hammer system, predisposition for oscillating bucket. Hydraulic pump with maximum flow rate between 230–275 l / min;

r) A 800 mm burglary bucket (ISO 7451);

s) A 2 000 mm trimming bucket (ISO 7451);

t) An electric compressor for cleaning radiators;

u) n or 1 tool box;

v) Safety valves on each arm with acoustic overload warning and relative ISPESL certification for load lifting equipment and side flow diagram, lifting ring on push rod;

w) Course on the use of the operating machine for technical consortium personnel;

x) Geolocation system of the vehicle with remote anomaly control function, status monitoring and functionality;

y) Testing and homologation for road circulation as a self-propelled operating machine fitted with our proprietary 2 500 mm wide road bucket.

Everything must comply with the EC directives on exhaust gases, Directive 97/68 / EC on acoustic emission for outdoor machines, to the directive 2000/14 / EC, «New machinery directive» 2006/42 / EC, Electromagnetic Compatibility Directive 2004/108 / EC and Legislative Decree 81/2008 regarding the protection of workers from the risks of exposure to vibrations

The equipment must be CE marked, the personnel must be able to operate in conditions of safety and reliability at the approved speeds.

It must be delivered together with the machine in addition to the use and maintenance booklet written in Italian complete with electrical and hydraulic diagrams, digital copy of the workshop manual, specific training course for the operator and maintenance personnel for a total duration of 8 working hours, declaration of CE conformity and warranty booklet