The subject of the order is the delivery of machines to operate the waste sorting hall. The order will be executed in the following parts:
Part 1: Telescopic boom lift with interchangeable working gear — 2 pieces
Part 2: Forklift with counterweight — 2 pieces
Part 1: Telescopic boom lift with interchangeable working gear — 2 piecesThe subject of the order is the delivery of machines to operate the waste sorting hall. The order will be executed in the following parts:
Part 1: Telescopic boom lift with interchangeable working gear — 2 pieces
Detailed specification of the item of the order - expected parameters and functionality:
-machine equipped with diesel engine,
-engine power not less than 95 kW,
- machine with torsion axles - front and rear, with the possibility of turning front wheels, front and rear wheels, driving “crab”,
-machine equipped with pumped wheels with a diameter of 24rims,
-machine with the ability to overcome climbs with a load — down to 15%, up to 35%,
-machine equipped with glazed cabin, closed,
-cabin equipped with outdoor air supply with the possibility of hot air supply,
-air-conditioned cabin,
-cabin equipped with adjustable (also up-down adjustable), seat with seat belt,
- the total weight of the machine without fittings not more than 7700 kg,
- the length of the machine without fittings no more than 4.8 m,
- the height of the machine (from the ground to the top of the cabin) not more than 2.6 m,
- the capacity of the machine not less than 3450 kg,
-forward overhang with a load of 1 200 kg (from the center of gravity of the material transferred to perpendicular to the ground tangent to the surface of the front wheels) not less than 3,2 m,
-overhang up at an angle of 70 degrees to a level with a load of 2 450 kg (from the ground to the center of gravity of the material transferred at the height of the fork) not less than 7 m,
-machine equipped with front and rear lights and blinkers,
-machine equipped with orange signal light,
-machine equipped with a sound signal when driving back,
-machine equipped with a pin hook on the back,
-Working equipment — spoon with min/max 1.9-2,1 m3 — total 1 piece for both machines, pallet forks adjustable by hand length 160 cm with a capacity not less than the capacity of the machine — a total of 1 piece for both machines, spoon with -capacity min/max 2.5-2,6 m3 — total 1 piece for both machines.
MORE INFORMATION IN THE DOCUMENT PN. “TENDER INQUIRY” 16/NFOSIGW/2021 AVAILABLE AT THE CONTRACTING AGENT: http://www.eko-mysl.pl/zapytania-ofertowe/
Part 2: Forklift with counterweight — 2 piecesThe subject of the order is the delivery of machines to operate the waste sorting hall. The order will be executed in the following parts:
Part 2: Forklift with counterweight 2 pieces:
Detailed specification of the item of the order - expected parameters and functionality:
-machine equipped with diesel engine,
- the power of the driving engine not less than 35 kW,
-Operator sitting position,
-number of front/rear gear — 1/1,
-mast — front, lifting height 3m, integrated side slide,
-minimum turning radius (outer) not more than 245 cm, minimum turning radius (internal) not more than 22 cm,
- Mast incline angles minimally forward/rear 6 degrees/10 degrees,
-tyres on front and back flexible plastic single,
- trolley equipped with glazed cabin, closed,
-cushioned cabin, equipped with outdoor air supply with the possibility of hot air supply, heating — blowout in the door,
-cabin equipped with adjustable seat with seat belt,
- trolley capacity 3,5 t,
-weight of the trolley not more than 4830 kg,
-length of the trolley with forks not more than 4 m,
- the height of the trolley no more than 2.2 m
- trolley equipped with a fork length of 1.2 m, with the possibility of manual retraction, a fork capacity 1750 kg and interchangeably with a hydraulic side slide - pulling the gripper up to 200 cm, the length of the gripper arm 1 m, width 55 cm,
- trolley equipped with front and rear lights and blinkers,
- trolley equipped with orange signal light,
- trolley equipped with a beep when driving back
-machine equipped with a pin hook on the back.
MORE INFORMATION IN THE DOCUMENT PN. “TENDER INQUIRY” 16/NFOSIGW/2021 AVAILABLE AT THE CONTRACTING AGENT: http://www.eko-mysl.pl/zapytania-ofertowe/