In compliance with the funding regulations, this tender for the schools of the city of Geislingen is to procure mounting systems and services for the construction and service of the systems, as well as the delivery of multimedia systems with blackboard pylon system, document cameras, Windows desktop PC, Apple devices, printers, active LAN/WLAN components and cabling work.
In detail:
- Multimedia systems – touch screens
- Mounting systems
- Services for construction and service for the systems
LOT-0001
Media Technology Document Cameras – Replenishment.
Replenishment of Optoma DC556 document camera to equip a unified inventory.
Optoma DC 556 1 pc
LOT-0002
Media Technology Document Cameras – Subsequent Procurement.
Subsequent procurement of ELMO L-12G document camera to equip a uniform inventory.
ELMO L-12G - 5 pcs
LOT-0003
Media Technology Beamer.
Replenishment of "Optoma" - manufacturer Optoma and named accessories to equip a uniform stock, uniform operation and central administration.
LOT-0007
Raspberry PI.
Raspberry PI Environment
Client-related performance requirement.
Procurement of Raspberry PI Model 5 to equip a uniform inventory.
Raspberry PI Model 5 16 pcs
Raspberry PI Model 5 with 2nd board and:
Minimum requirement
Procurement - incl. case large, space for additional board - type m.2 board incl., and external USB-C power supply and SSD with 32 GB pluggable on board.
Guarantee by law
Note:
Data sheets and product information for all parts offered must be submitted with the offer.
LOT-0008
Printer.
LAN and WiFi enabled laser printers
Basic position
4c Printer
Minimum occupancy:
Resolution from: 1200x1200 dpi
DIN A4
Paper cassette min. 250 sheets
Douplex and scan function
1 Gbit/s Ethernet
Apple Air Print 2 Pcs
Alternative position 1 to basic position 08.01.0010
Demand Item with Total Amount
4c Printer - Eco/SmartPrint
Minimum occupancy:
Inkjet printer with ink cartridges for self-refilling. Special refill system comparable to Epson-EcoPrint.
Resolution from: 1200x1200 dpi
DIN A4
Paper cassette min. 250 sheets
Douplex and scan and copy function
1 Gbit/s Ethernet
WiFi 2 pcs only EP
LAN and WiFi enabled laser printers
4c Printer - Eco/SmartPrint
Minimum occupancy:
Inkjet printer with ink cartridges for self-refilling. Special refill system comparable to Epson-EcoPrint.
Resolution from: 1200x1200 dpi
DIN A4
Paper cassette min. 250 sheets
Douplex and scan and copy function
1 Gbit/s Ethernet
WiFi 2 pcs
4c Printer - Eco/SmartPrint
Minimum occupancy:
Inkjet printer with ink cartridges for self-refilling. Special refill system comparable to Epson-EcoPrint.
Resolution from: 1200x1200 dpi
DIN A3
Paper cassette min. 250 sheets
Douplex and scan and copy function
1 Gbit/s Ethernet
WiFi 1 pc
Demand Item with Total Amount
4c Printer - Eco/SmartPrint
Minimum occupancy:
Inkjet printer with ink cartridges for self-refilling. Special refill system comparable to Epson-EcoPrint.
Resolution from: 1200x1200 dpi
DIN A4
Paper cassette min. 250 sheets
Douplex and scan and copy function
1 Gbit/s Ethernet
WiFi 3 pcs
Demand Item with Total Amount
4c Printer - Eco/SmartPrint
Minimum occupancy:
Inkjet printer with ink cartridges for self-refilling. Special refill system comparable to Epson-EcoPrint.
Resolution from: 1200x1200 dpi
DIN A3
Paper cassette min. 250 sheets
Douplex and scan and copy function
1 Gbit/s Ethernet
WiFi 1 pc
LOT-0009
3D printer.
3D 3 in 1 Printer
3D printer
with the following requirements:
Description / Instructions in German
Functions: 3D printing, laser engraving and cutting, and CNC carving
Nozzle temperature up to 275 degrees C or higher
Flat resolution 50-300 microns
Wavelength: 450nm
CNS shaft diameter 0.5mm-6.35mm
Coil speed 6000-12000 rpm
Pressure Width (X) max. 320mm or higher
Printing Depth (Y) max. 350mm or higher
Print Height (Z) max. 330mm or higher
Print bed: Heated
Interfaces: WSB / WLAN
Case
All approvals according to the required safety standards (must be presented at the request of the Client)
All necessary cables and SW are included in the scope of delivery.
Delivery min. as a kit or plug / ready for use incl. housing
Statutory guarantee 1 pc
Demand Item with Total Amount
3D printer
with the following minimum requirements:
Description / Instructions in German
Functions: 3D printing, laser engraving and cutting, and CNC carving
Nozzle temperature up to 275 degrees C or higher
Flat resolution 50-300 microns
Wavelength: 450nm
CNS shaft diameter 0.5mm-6.35mm
Coil speed 6000-12000 rpm
Pressure Width (X) max. 320mm or higher
Printing Depth (Y) max. 350mm or higher
Print Height (Z) max. 330mm or higher
Print bed: Heated
Interfaces: WSB / WLAN
Case
All approvals according to the required safety standards (must be presented at the request of the Client)
All necessary cables and SW are included in the scope of delivery.
Delivery min. as a kit or plug / ready for use incl. housing
Warranty statutory 2 pcs
3D 3 in 1 Printer
3D printer
with the following
Minimum requirements:
Description / Instructions in German
Functions: 3D printing, laser engraving and cutting, and CNC carving
Nozzle temperature up to 275 degrees C or higher
Flat resolution 50-300 microns
Wavelength: 450nm
CNS shaft diameter 0.5mm-6.35mm
Coil speed 6000-12000 rpm
Pressure Width (X) max. 320mm or higher
Printing Depth (Y) max. 350mm or higher
Print Height (Z) max. 330mm or higher
Print bed: Heated
Interfaces: WSB / WLAN
Case
All approvals according to the required safety standards (must be presented at the request of the Client)
All necessary cables and SW are included in the scope of delivery.
Delivery min. as a kit or plug / ready for use incl. housing
Statutory guarantee 1 pc
Demand Item with Total Amount
3D printer
with the following minimum requirements:
Description / Instructions in German
Functions: 3D printing, laser engraving and cutting, and CNC carving
Nozzle temperature up to 275 degrees C or higher
Flat resolution 50-300 microns
Wavelength: 450nm
CNS shaft diameter 0.5mm-6.35mm
Coil speed 6000-12000 rpm
Pressure Width (X) max. 320mm or higher
Printing Depth (Y) max. 350mm or higher
Print Height (Z) max. 330mm or higher
Print bed: Heated
Interfaces: WSB / WLAN
Case
All approvals according to the required safety standards (must be presented at the request of the Client)
All necessary cables and SW are included in the scope of delivery.
Delivery min. as a kit or plug / ready for use incl. housing
Warranty statutory 2 pcs
3D 3 in 1 Printer
3D printers, with the following minimum requirements:
Description / Instructions in German
Functions: 3D printing, laser engraving and cutting, and CNC carving
Nozzle temperature up to 275 degrees C or higher
Flat resolution 50-300 microns
Wavelength: 450nm
CNS shaft diameter 0.5mm-6.35mm
Coil speed 6000-12000 rpm
Pressure Width (X) max. 320mm or higher
Printing Depth (Y) max. 350mm or higher
Print Height (Z) max. 330mm or higher
Print bed: Heated
Interfaces: WSB / WLAN
Case
All approvals according to the required safety standards (must be presented at the request of the Client)
All necessary cables and SW are included in the scope of delivery.
Delivery min. as a kit or plug / ready for use incl. housing
Statutory guarantee 1 pc
Demand Item with Total Amount
3D printer
with the following minimum requirements:
Description / Instructions in German
Functions: 3D printing, laser engraving and cutting, and CNC carving
Nozzle temperature up to 275 degrees C or higher
Flat resolution 50-300 microns
Wavelength: 450nm
CNS shaft diameter 0.5mm-6.35mm
Coil speed 6000-12000 rpm
Pressure Width (X) max. 320mm or higher
Printing Depth (Y) max. 350mm or higher
Print Height (Z) max. 330mm or higher
Print bed: Heated
Interfaces: WSB / WLAN
Case
All approvals according to the required safety standards (must be presented at the request of the Client)
All necessary cables and SW are included in the scope of delivery.
Delivery min. as a kit or plug / ready for use incl. housing
Warranty statutory 2 pcs
LOT-0004
Media Technology Touch-Screen.
Please note the Appendix: Appendix B1 Service Description with Evaluation Scheme and Appendix C1 Service Description Multimedia Hardware
The A (minimum criteria) and B (criteria) listed in the annex on the "LV" sheet must be completed in full in the fields provided.
The evaluation of the offers is carried out according to the linear interpolation. According to this procedure, in addition to the price, the technical features are also included in the evaluation.
Failure to complete this annex will result in exclusion from the procedure for the LOT in question.
Touch Screen 86"
Minimum requirements see: Appendix B1 Service description with evaluation scheme and Appendix C1 Service description multimedia hardware 1 pc
Sound
Minimum requirements see: Appendix B1 Service description with evaluation scheme and Appendix C1 Service description multimedia hardware 1 pc
Chassis with receptacle for panel wing for 86"
Chassis without mount for panel sash for 86" touch screen
Minimum requirements see: Appendix B1 Service description with evaluation scheme and Appendix C1 Service description multimedia hardware 1 pc
Cable set incl. winding hose
Minimum requirements see: Appendix B1 Service description with evaluation scheme and Appendix C1 Service description multimedia hardware 1 pc
Assembly and delivery
For minimum requirements, see: Appendix B1 Service Description with Evaluation Scheme and Appendix C1 Service Description Multimedia Hardware. 1 item
Warranty and services for 60 months
Minimum requirements see: Appendix B1 Service description with evaluation scheme and Appendix C1 Service description multimedia hardware 1 pc
Please note the Appendix: Appendix B1 Service Description with Evaluation Scheme and Appendix C1 Service Description Multimedia Hardware
The A (minimum criteria) and B (criteria) listed in the annex on the "LV" sheet must be completed in full in the fields provided.
The evaluation of the offers is carried out according to the linear interpolation. According to this procedure, in addition to the price, the technical features are also included in the evaluation.
Failure to complete this annex will result in exclusion from the procedure for the LOT in question.
Touch screen 75"
Minimum requirements see: Appendix B1 Service description with evaluation scheme and Appendix C1 Service description multimedia hardware 1 pc
Sound
Minimum requirements see: Appendix B1 Service description with evaluation scheme and Appendix C1 Service description multimedia hardware 1 pc
Chassis with receptacle for panel wing for 65/75"
Chassis without mount for panel sash for 75" touch screen
Minimum requirements see: Appendix B1 Service description with evaluation scheme and Appendix C1 Service description multimedia hardware 1 pc
Cable set incl. winding hose
Minimum requirements see: Appendix B1 Service description with evaluation scheme and Appendix C1 Service description multimedia hardware 1 pc
Assembly and delivery
For minimum requirements, see: Appendix B1 Service Description with Evaluation Scheme and Appendix C1 Service Description Multimedia Hardware. 1 item
Warranty and services for 60 months
Minimum requirements see: Appendix B1 Service description with evaluation scheme and Appendix C1 Service description multimedia hardware 1 pc
Hourly wages according to Annex C 1
Demand item without total amount
Hourly rate fitter 1 h only EP
Demand item without total amount
Hourly rate technician 1 h only EP
LOT-0005
Apple/iOS environment.
See tender documents
LOT-0006
Windows environment.
Windows Environment - Teacher Workstation Classroom
see award documents