The district of Donau-Ries intends to procure a new equipment trolley for respiratory protection/radiation protection GW-A/S in accordance with DIN EN 1846 (parts 1 to 3), draft DIN 14502, part 2 and the technical building specification GW-A/S (issue 04/2003) for the Nördlingen fire brigade site

Delivery of a cab-over-engine chassis with road drive, suitable for the construction of an equipment trolley for respiratory protection/radiation protection GW-A/S according to technical specifications GW-A/S, DIN EN 1846 and E DIN 14502.

The vehicle must comply with category 1 (roadworthy) according to DIN EN 1846-1 and DIN EN 1846-2.

(with diesel engine, Euro VI emission standard, engine power at least 210 kW and an automatic torque converter manual transmission with at least 5 gears)

Delivery of a fire-fighting superstructure to accommodate the load provided for in the technical specification GW-A/S and described below, suitable for the chassis described in Lot 1.

After the driver's cab, an equipment compartment module with roller shutters and a width of at least 1,200 mm.

Fixed case module after the equipment compartment module. Division of the box body into working area and cargo space. Work area with access door on the right-hand side of the vehicle.

At the rear there is a cargo space for at least roll containers. Rear end by means of tail lift, not cross-divided.

Delivery of the fire-fighting equipment in accordance with the GW-A/S building guideline.

Delivery of roll containers RC respiratory protection, RC breathing air cylinders, RC operation, RC hygiene and RC lattice box.

Execution of the RC according to Technical Recommendation No. 2 (July 2014) - "Guideline for the construction and use of non-powered roll containers in the fire brigade sector".

Delivery of respiratory protection technology with accessories.