Delivery of a vehicle for the reception of separately collected waste.
1. The vehicle with the bodywork and weighing system must be constructed
from brand new materials.
2. The vehicle should be delivered to the registered office of Przedsiębiorstwo Gospodarki Komunalnej Sp. z o.o.,
Komunalna 5, 75-724 Koszalin, from 7.00 to 14.00 from Monday to Friday
with the exception of public holidays, after prior notification to the Ordering Party
at least 3 working days before delivery.
II. Purpose.
1. Waste collection vehicle, enclosed with a drawer body with a push plate with side handles (so-called paws for loading containers) and a comb bar.
2. Vehicle adapted to receive separately collected waste.
III. Technical parameters of the body (body).
1. Brand new.
2. Nieeksploatowane.
3. Produced not earlier than 2023
III. Technical parameters of the body (body).
1. Brand new.
2. Nieeksploatowane.
3. Produced not earlier than 2023
4. Body capacity: minimum 21 m3,
5. Load capacity of the vehicle after completion: minimum 10.0 Mg (+/-10%),
6. Technical parameters of the body (body).
6.1. Load platform.
1) Materials used to make the load platform:
a. Body floor: wear-resistant steel: minimum 4 mm, maximum
6 mm.
b. Body sides and roof: steel sheet minimum 3 mm, maximum 4 mm.
2) Rigid structure of steel body fully welded and sealed:
a) Body welded with continuous weld.
(b) Gasket at the interface between the body and the abdomen.
c) Inspection doors on the wall of the body (body).
6.2. Abdomen charging tank:
1) Hopper capacity: minimum 2.5 m3,
2) Made of wear-resistant steel, resistant to deformation and abrasion with a thickness:
a) Bottom minimum 8 mm, maximum 11 mm.
b) Sides minimum 4 mm, maximum 6 mm.
(3) Lifting the abdomen by means of cylinders located on the sides of the body (body).
4) Loading edge of the feeder with the possibility of lowering – loading bags - minimum
1 200 mm from the ground, maximum 1 300 mm from the ground.
(5) Abdomen with automatic locking and unlocking.
(6) Acoustic warning signal for opening and closing the abdomen.
7) Protection against cable rupture, preventing the abdomen from falling rapidly.
8) Lowering the abdomen - operation from the outside by two-hand control.
9) Dust curtains.
6.3. Discharge device:
1) Body (body) with rear charging device.
2) Loading device adapted for emptying containers with a capacity of
from 80 liters to 1100 liters.
3) Emptying four-wheeled containers with paws and on a comb.
4) Lifting capacity of the dumping device: minimum 700 kg, maximum 900 kg.
5) Lid opener and container fender.
a) Pneumatically controlled.
b) Fully galvanized.
6) Jammed object release system.
7) Automatic control of engine speed depending on the load of the hydraulic system.
8) Adapted to work with a dynamic scale.
9) Cooperating with the RFID container identification system together with the ELTE or XTRACK GPS location system, which are currently used by Przedsiębiorstwo Gospodarki Komunalnej Sp. z o.o. in Koszalin.
(10) Acoustic warning signal for reversing the vehicle and opening and closing the abdomen.
6.4. Waste movement and compaction:
1) In the linear system realized by shovel and kneading drawer.
2) Push plate guides located on the walls of the load platform.
3) The ejection plate performs reciprocating motion during kneading of the waste.
4) Crushing press cylinders located outside the charging tank.
5) Slide plate cylinders located inside the abdomen.