The market is broken down into fixed lump sum services and non-package services

Flat-rate firm services:

Mission 1 - radiological measurements in the material zone (cf. § 3.1 of the CSTP)

Mission 2 - maps of the office area (see § 3.2 of the CSTP)

Non-package services

• carrying out radiological measurements by sampling at ceilings,

• carrying out radiological measurements requiring the removal of false ceilings,

• 100% mapping of a surface,

• taking samples by bush hammering,

• the taking of samples by coring,

• radiological analyses,

• chemical analyses

• carrying out measurements by spectrometry,

• the use of shielding,

• the realization of finer radiological measurements,

• samples with asbestos risk,

• carrying out gamma X measurements.

Fixed flat-rate services

o Mission 1: Radiological measurements in the “material zone” (cf. § 3.1 of the CSTP),

o Mission 2: Mapping of the office area (see § 3.2 of the CSTP)

Services outside the package (scenario)

400 smears ceiling, wall or floor (see § 4.1 CSTP),

5 smears on the ceiling in the same room (cf. § 4.1 of the CSTP) for 22 premises therefore a total of 110 smears,

5 additional direct radiological measurements on the ceiling in the same room (see § 4.1) for 3 ceilings therefore a total of 15 measurements,

Radiological measurements with false ceiling removal (cf. § 4.2 of the CSTP) for 5 premises, i.e. a total of 25 measurements,

Mapping on 100% of the surface of a 20 m2 cell (cf. § 4.3 of the CSTP) for 10 surfaces of 20 m2 each, i.e. 200 m2

Assembly/disassembly of site containment: 5

Domestic bush hammering, (see § 4.4 of the CSTP): 6

External bush hammering, (see § 4.4 of the CSTP): 10

Internal coring, (see § 4.5 of the CSTP): 1

External coring, (see § 4.5 of the CSTP): 1

Radiological analysis (spectro alpha) of a sample (see § 4.6 of the CSTP): 1

Chemical analysis (cf. § 4.7 of the CSTP): 10

Gamma scanning measurements on 1 core (cf. § 4.8 of the CSTP): 1

Installation of shielding on the measuring device (cf. § 4.9 of the CSTP: 1

Establishment of biological protection for a room to be measured (cf. § 4.9 of the CSTP): 10

Finer measurements on a mesh (see § 4.10): 60

Arrangement for asbestos hazard for a containment (see § 4.11 of the CSTP): 4

Realization of gamma X mapping for an area of the order of 20 m2 (cf. § 4.12 of the CSTP)

Carrying out a measurement for singularity (cf. § 3.1.4 of the CSTP)