The subject of the contract are services in the field of forest management as defined in Article 6 paragraph 1 point 1 of the Act of 28.09.1991 on forests (consolidated text: Journal of Laws of 2022, item 672, as amended – "Forest Act") including works in the field of forest breeding and protection, fire protection, logging and skidding, repairs and implementation of new skidding routes, to be performed in the Komańcza District in 2023.

The procedure is conducted under the open tender procedure pursuant to Article 129(1)(1) in conjunction with Article 129(2) and Articles 132-139 of the Act of 11/09/2019. Public Procurement Law (consolidated text: Journal of Laws of 2022, item 1710, as amended, "PZP") and implementing acts to the Public Procurement Law, in accordance with the rules provided for classic contracts with a value equal to or exceeding the EU thresholds.

The proceedings are conducted in accordance with the rules provided for the so-called "reverse procedure" referred to in Article 139(1), (3)-(4) of the PZP

The material scope of the contract includes the total quantities of works in the field of forest breeding and protection, fire protection, logging and skidding, repairs and implementation of new skidding routes resulting from Annex 2 to the SWZ, which consists of: Appendix No. 2.1. – planned size of works; Appendix No. 2.2. - detailed size of works by groups of activities, activities and location; Appendix 2.3.1. – forestry characteristics in terms of timber harvesting; Appendix No. 2.3.2. – assortment system of timber harvesting in forestry; Appendix No. 2.3.3. – a list of distances and conditions of skidding wood; Appendix No. 2.3.4. – list of items with additional difficulties in obtaining and skidding; Appendix 2.3.5. – list of items not available for machine acquisition; Appendix 2.3.6. – information on the optimal technology of logging (potential); Appendix No. 2.4.1. - information on the nature of forest care (zones for mowing weeds); Appendix No. 2.4.2. - list of items not available for renewal made with the help of a planter. The material scopes listed in the annexes included in Annex 2 are estimates. Quality standards relating to all essential features of the subject of the contract are set out in Annex 3 to the SWZ, which consists of: Annex 3.1. "Description of the standard of forestry work performance technology" adopted by Decision No. 34 of the General Director of the State Forests of May 12, 2022 on the introduction of the "Description of the standard of forestry work performance technology" in organizational units of the State Forests (EZ.011.13.2022) and Decision No. 86 of the General Director of the State Forests of July 19, 2022 on the amendment of the annex to Decision No. 34 of the General Director of the State Forests of May 12, 2022 on introduction to the use of the "Description of the standard of forestry work performance technology" in organizational units of the State Forests (MZ.011.4.2022); Appendix No. 3.2. Description of the standard of forestry work performance technology in the Regional Directorate of State Forests in Krosno adopted by Decision No. 19 of the Regional Director of the State Forests in Krosno of June 21, 2022 on the introduction of the "Description of the standard of forest works" in forest districts grouped in the Regional Directorate of State Forests in Krosno (DK.0070.1.2022) and Decision No. 73 of the Director of the Regional Directorate of State Forests in Krosno of July 29, 2022 on the change Annex to Decision No. 19 of the Director of the Regional Directorate of State Forests in Krosno of June 21, 2022 on the introduction of the "Description of the standard of forestry work technology" in forest districts grouped in the Regional Directorate of State Forests, ERRATA of 11.10.2022, ERRATA 2 - 12.10.2022 specified in Annex 3.1. to the SWZ and in Annex 3.2. to the SWZ a detailed description of the technology standard for performing individual forestry works (activities) is the basis for determining the quality requirements relating to the elements making up the subject of the contract (Annex 2 to the SWZ). If the action described in the above-mentioned annexes has not been provided for in the description of the subject of the contract (Annex No. 2 to the SWZ), then in this respect the provisions of Annex No. 3.1. to the SWZ and in Annex No. 3.2. to the SWZ do not apply.

Descriptions of activity codes describing individual forest works (activities) included in the subject of the contract are described in Appendix No. 3 to the SWZ.

A description of the rules of the procedure for the acceptance of forest works is included in Annex 3 to the SWZ.

The material scope of the contract includes the total quantities of works in the field of forest breeding and protection, fire protection, logging and skidding, repairs and implementation of new skidding routes resulting from Annex 2 to the SWZ, which consists of: Appendix No. 2.1. – planned size of works; Appendix No. 2.2. - detailed size of works by groups of activities, activities and location; Appendix 2.3.1. – forestry characteristics in terms of timber harvesting; Appendix No. 2.3.2. – assortment system of timber harvesting in forestry; Appendix No. 2.3.3. – a list of distances and conditions of skidding wood; Appendix No. 2.3.4. – list of items with additional difficulties in obtaining and skidding; Appendix 2.3.5. – list of items not available for machine acquisition; Appendix 2.3.6. – information on the optimal technology of logging (potential); Appendix No. 2.4.1. - information on the nature of forest care (zones for mowing weeds); Appendix No. 2.4.2. - list of items not available for renewal made with the help of a planter. The material scopes listed in the annexes included in Annex 2 are estimates. Quality standards relating to all essential features of the subject of the contract are set out in Annex 3 to the SWZ, which consists of: Annex 3.1. "Description of the standard of forestry work performance technology" adopted by Decision No. 34 of the General Director of the State Forests of May 12, 2022 on the introduction of the "Description of the standard of forestry work performance technology" in organizational units of the State Forests (EZ.011.13.2022) and Decision No. 86 of the General Director of the State Forests of July 19, 2022 on the amendment of the annex to Decision No. 34 of the General Director of the State Forests of May 12, 2022 on introduction to the use of the "Description of the standard of forestry work performance technology" in organizational units of the State Forests (MZ.011.4.2022); Appendix No. 3.2. Description of the standard of forestry work performance technology in the Regional Directorate of State Forests in Krosno adopted by Decision No. 19 of the Regional Director of the State Forests in Krosno of June 21, 2022 on the introduction of the "Description of the standard of forest works" in forest districts grouped in the Regional Directorate of State Forests in Krosno (DK.0070.1.2022) and Decision No. 73 of the Director of the Regional Directorate of State Forests in Krosno of July 29, 2022 on the change Annex to Decision No. 19 of the Director of the Regional Directorate of State Forests in Krosno of June 21, 2022 on the introduction of the "Description of the standard of forestry work technology" in forest districts grouped in the Regional Directorate of State Forests, ERRATA of 11.10.2022, ERRATA 2 - 12.10.2022 specified in Annex 3.1. to the SWZ and in Annex 3.2. to the SWZ a detailed description of the technology standard for performing individual forestry works (activities) is the basis for determining the quality requirements relating to the elements making up the subject of the contract (Annex 2 to the SWZ). If the action described in the above-mentioned annexes has not been provided for in the description of the subject of the contract (Annex No. 2 to the SWZ), then in this respect the provisions of Annex No. 3.1. to the SWZ and in Annex No. 3.2. to the SWZ do not apply.

Descriptions of activity codes describing individual forest works (activities) included in the subject of the contract are described in Appendix No. 3 to the SWZ.

A description of the rules of the procedure for the acceptance of forest works is included in Annex 3 to the SWZ.

The material scope of the contract includes the total quantities of works in the field of forest breeding and protection, fire protection, logging and skidding, repairs and implementation of new skidding routes resulting from Annex 2 to the SWZ, which consists of: Appendix No. 2.1. – planned size of works; Appendix No. 2.2. - detailed size of works by groups of activities, activities and location; Appendix 2.3.1. – forestry characteristics in terms of timber harvesting; Appendix No. 2.3.2. – assortment system of timber harvesting in forestry; Appendix No. 2.3.3. – a list of distances and conditions of skidding wood; Appendix No. 2.3.4. – list of items with additional difficulties in obtaining and skidding; Appendix 2.3.5. – list of items not available for machine acquisition; Appendix 2.3.6. – information on the optimal technology of logging (potential); Appendix No. 2.4.1. - information on the nature of forest care (zones for mowing weeds); Appendix No. 2.4.2. - list of items not available for renewal made with the help of a planter. The material scopes listed in the annexes included in Annex 2 are estimates. Quality standards relating to all essential features of the subject of the contract are set out in Annex 3 to the SWZ, which consists of: Annex 3.1. "Description of the standard of forestry work performance technology" adopted by Decision No. 34 of the General Director of the State Forests of May 12, 2022 on the introduction of the "Description of the standard of forestry work performance technology" in organizational units of the State Forests (EZ.011.13.2022) and Decision No. 86 of the General Director of the State Forests of July 19, 2022 on the amendment of the annex to Decision No. 34 of the General Director of the State Forests of May 12, 2022 on introduction to the use of the "Description of the standard of forestry work performance technology" in organizational units of the State Forests (MZ.011.4.2022); Appendix No. 3.2. Description of the standard of forestry work performance technology in the Regional Directorate of State Forests in Krosno adopted by Decision No. 19 of the Regional Director of the State Forests in Krosno of June 21, 2022 on the introduction of the "Description of the standard of forest works" in forest districts grouped in the Regional Directorate of State Forests in Krosno (DK.0070.1.2022) and Decision No. 73 of the Director of the Regional Directorate of State Forests in Krosno of July 29, 2022 on the change Annex to Decision No. 19 of the Director of the Regional Directorate of State Forests in Krosno of June 21, 2022 on the introduction of the "Description of the standard of forestry work technology" in forest districts grouped in the Regional Directorate of State Forests, ERRATA of 11.10.2022, ERRATA 2 - 12.10.2022 specified in Annex 3.1. to the SWZ and in Annex 3.2. to the SWZ a detailed description of the technology standard for performing individual forestry works (activities) is the basis for determining the quality requirements relating to the elements making up the subject of the contract (Annex 2 to the SWZ). If the action described in the above-mentioned annexes has not been provided for in the description of the subject of the contract (Annex No. 2 to the SWZ), then in this respect the provisions of Annex No. 3.1. to the SWZ and in Annex No. 3.2. to the SWZ do not apply.

Descriptions of activity codes describing individual forest works (activities) included in the subject of the contract are described in Appendix No. 3 to the SWZ.

A description of the rules of the procedure for the acceptance of forest works is included in Annex 3 to the SWZ.

The material scope of the contract includes the total quantities of works in the field of forest breeding and protection, fire protection, logging and skidding, repairs and implementation of new skidding routes resulting from Annex 2 to the SWZ, which consists of: Appendix No. 2.1. – planned size of works; Appendix No. 2.2. - detailed size of works by groups of activities, activities and location; Appendix 2.3.1. – forestry characteristics in terms of timber harvesting; Appendix No. 2.3.2. – assortment system of timber harvesting in forestry; Appendix No. 2.3.3. – a list of distances and conditions of skidding wood; Appendix No. 2.3.4. – list of items with additional difficulties in obtaining and skidding; Appendix 2.3.5. – list of items not available for machine acquisition; Appendix 2.3.6. – information on the optimal technology of logging (potential); Appendix No. 2.4.1. - information on the nature of forest care (zones for mowing weeds); Appendix No. 2.4.2. - list of items not available for renewal made with the help of a planter. The material scopes listed in the annexes included in Annex 2 are estimates. Quality standards relating to all essential features of the subject of the contract are set out in Annex 3 to the SWZ, which consists of: Annex 3.1. "Description of the standard of forestry work performance technology" adopted by Decision No. 34 of the General Director of the State Forests of May 12, 2022 on the introduction of the "Description of the standard of forestry work performance technology" in organizational units of the State Forests (EZ.011.13.2022) and Decision No. 86 of the General Director of the State Forests of July 19, 2022 on the amendment of the annex to Decision No. 34 of the General Director of the State Forests of May 12, 2022 on introduction to the use of the "Description of the standard of forestry work performance technology" in organizational units of the State Forests (MZ.011.4.2022); Appendix No. 3.2. Description of the standard of forestry work performance technology in the Regional Directorate of State Forests in Krosno adopted by Decision No. 19 of the Regional Director of the State Forests in Krosno of June 21, 2022 on the introduction of the "Description of the standard of forest works" in forest districts grouped in the Regional Directorate of State Forests in Krosno (DK.0070.1.2022) and Decision No. 73 of the Director of the Regional Directorate of State Forests in Krosno of July 29, 2022 on the change Annex to Decision No. 19 of the Director of the Regional Directorate of State Forests in Krosno of June 21, 2022 on the introduction of the "Description of the standard of forestry work technology" in forest districts grouped in the Regional Directorate of State Forests, ERRATA of 11.10.2022, ERRATA 2 - 12.10.2022 specified in Annex 3.1. to the SWZ and in Annex 3.2. to the SWZ a detailed description of the technology standard for performing individual forestry works (activities) is the basis for determining the quality requirements relating to the elements making up the subject of the contract (Annex 2 to the SWZ). If the action described in the above-mentioned annexes has not been provided for in the description of the subject of the contract (Annex No. 2 to the SWZ), then in this respect the provisions of Annex No. 3.1. to the SWZ and in Annex No. 3.2. to the SWZ do not apply.

Descriptions of activity codes describing individual forest works (activities) included in the subject of the contract are described in Appendix No. 3 to the SWZ.

A description of the rules of the procedure for the acceptance of forest works is included in Annex 3 to the SWZ.

The material scope of the contract includes the total quantities of works in the field of forest breeding and protection, fire protection, logging and skidding, repairs and implementation of new skidding routes resulting from Annex 2 to the SWZ, which consists of: Appendix No. 2.1. – planned size of works; Appendix No. 2.2. - detailed size of works by groups of activities, activities and location; Appendix 2.3.1. – forestry characteristics in terms of timber harvesting; Appendix No. 2.3.2. – assortment system of timber harvesting in forestry; Appendix No. 2.3.3. – a list of distances and conditions of skidding wood; Appendix No. 2.3.4. – list of items with additional difficulties in obtaining and skidding; Appendix 2.3.5. – list of items not available for machine acquisition; Appendix 2.3.6. – information on the optimal technology of logging (potential); Appendix No. 2.4.1. - information on the nature of forest care (zones for mowing weeds); Appendix No. 2.4.2. - list of items not available for renewal made with the help of a planter. The material scopes listed in the annexes included in Annex 2 are estimates. Quality standards relating to all essential features of the subject of the contract are set out in Annex 3 to the SWZ, which consists of: Annex 3.1. "Description of the standard of forestry work performance technology" adopted by Decision No. 34 of the General Director of the State Forests of May 12, 2022 on the introduction of the "Description of the standard of forestry work performance technology" in organizational units of the State Forests (EZ.011.13.2022) and Decision No. 86 of the General Director of the State Forests of July 19, 2022 on the amendment of the annex to Decision No. 34 of the General Director of the State Forests of May 12, 2022 on introduction to the use of the "Description of the standard of forestry work performance technology" in organizational units of the State Forests (MZ.011.4.2022); Appendix No. 3.2. Description of the standard of forestry work performance technology in the Regional Directorate of State Forests in Krosno adopted by Decision No. 19 of the Regional Director of the State Forests in Krosno of June 21, 2022 on the introduction of the "Description of the standard of forest works" in forest districts grouped in the Regional Directorate of State Forests in Krosno (DK.0070.1.2022) and Decision No. 73 of the Director of the Regional Directorate of State Forests in Krosno of July 29, 2022 on the change Annex to Decision No. 19 of the Director of the Regional Directorate of State Forests in Krosno of June 21, 2022 on the introduction of the "Description of the standard of forestry work technology" in forest districts grouped in the Regional Directorate of State Forests, ERRATA of 11.10.2022, ERRATA 2 - 12.10.2022 specified in Annex 3.1. to the SWZ and in Annex 3.2. to the SWZ a detailed description of the technology standard for performing individual forestry works (activities) is the basis for determining the quality requirements relating to the elements making up the subject of the contract (Annex 2 to the SWZ). If the action described in the above-mentioned annexes has not been provided for in the description of the subject of the contract (Annex No. 2 to the SWZ), then in this respect the provisions of Annex No. 3.1. to the SWZ and in Annex No. 3.2. to the SWZ do not apply.

Descriptions of activity codes describing individual forest works (activities) included in the subject of the contract are described in Appendix No. 3 to the SWZ.

A description of the rules of the procedure for the acceptance of forest works is included in Annex 3 to the SWZ.

The material scope of the subject of the contract includes the total quantities of works in the field of forest breeding and protection, fire protection, harvesting and harvesting of wood, repairs and execution of new skidding trails resulting from Annex 2 to the SWZ, which consists of: Annex No. 2.1. – planned size of works; Appendix No. 2.2. - detailed size of works by groups of activities, activities and locations; Appendix No. 2.3.1. – characteristics of forestry in the field of timber harvesting; Appendix No. 2.3.2. – assortment system of timber harvesting in forestry; Attachment No. 2.3.3. – a list of distances and conditions of harvesting wood; Appendix No. 2.3.4. – list of items with additional difficulties in the field of harvesting and skidding; Appendix No. 2.3.5. – list of items not made available for machine acquisition; Appendix No. 2.3.6. – information on the optimal technology of obtaining wood (potential); Appendix No. 2.4.1. - information on the nature of forest care (zones for mowing weeds); Attachment No. 2.4.2. - a list of items not available for renewals carried out with the help of a planter. Material ranges set out in the Annexes included in the Annex

No 2 is an estimate. Quality standards relating to all essential features of the subject of the contract are specified in Appendix No. 3 to the SWZ, which consists of: Appendix No. 3.1. "Description of the standard of technology for the performance of forest works" adopted by Decision No. 34 of the Director General of the State Forests of 12 May 2022 on the introduction of the "Description of the standard of forestry work technology" in organizational units of the State Forests (EZ.011.13.2022) and Decision No. 86 of the General Director of the State Forests of 19 July 2022 on the amendment of the Annex to Decision No. 34 of the General Director of the State Forests of 12 May 2022 on the amendment of the Annex to Decision No. 34 of the General Director of the State Forests of 12 May 2022 introduction to the application of the "Description of the standard of forestry work technology" in organizational units of the State Forests (MZ.011.4.2022); Attachment No. 3.2. Description of the standard of technology for the performance of forest works in the Regional Directorate of State Forests in Krosno adopted by Decision No. 19 of the Regional Director of State Forests in Krosno of June 21, 2022 on the introduction of the "Description of the standard of forest work performance" in forest districts grouped in the Regional Directorate of State Forests in Krosno (DK.0070.1.2022) and Decision No. 73 of the Director of the Regional Directorate of State Forests in Krosno of July 29, 2022 on the amendment of Annex to Decision No. 19 of the Director of the Regional Directorate of State Forests in Krosno of 21 June 2022 on the introduction of the "Description of the standard of forestry technology" in forest districts grouped in the Regional Directorate of State Forests, ERRATA of 11.10.2022, ERRATA 2 - 12.10.2022. the basis for determining the quality requirements relating to the elements constituting the subject of the contract (Annex 2 to the SWZ). If the activity described in the above-mentioned annexes is not provided for in the description of the subject of the contract (Annex No. 2 to the SWZ), then in this respect the provisions of Annex No. 3.1. to the SWZ and in Annex 3.2. to the SWZ do not apply.

Descriptions of activity codes describing individual forest works (activities) included in the subject of the contract are described in Appendix No. 3 to the SWZ.

A description of the rules of the procedure for the acceptance of forest works is included in Annex 3 to the SWZ.

The material scope of the contract includes the total quantities of works in the field of forest breeding and protection, fire protection, logging and skidding, repairs and implementation of new skidding routes resulting from Annex 2 to the SWZ, which consists of: Appendix No. 2.1. – planned size of works; Appendix No. 2.2. - detailed size of works by groups of activities, activities and location; Appendix 2.3.1. – forestry characteristics in terms of timber harvesting; Appendix No. 2.3.2. – assortment system of timber harvesting in forestry; Appendix No. 2.3.3. – a list of distances and conditions of skidding wood; Appendix No. 2.3.4. – list of items with additional difficulties in obtaining and skidding; Appendix 2.3.5. – list of items not available for machine acquisition; Appendix 2.3.6. – information on the optimal technology of logging (potential); Appendix No. 2.4.1. - information on the nature of forest care (zones for mowing weeds); Appendix No. 2.4.2. - list of items not available for renewal made with the help of a planter. The material scopes listed in the annexes included in Annex 2 are estimates. Quality standards relating to all essential features of the subject of the contract are set out in Annex 3 to the SWZ, which consists of: Annex 3.1. "Description of the standard of forestry work performance technology" adopted by Decision No. 34 of the General Director of the State Forests of May 12, 2022 on the introduction of the "Description of the standard of forestry work performance technology" in organizational units of the State Forests (EZ.011.13.2022) and Decision No. 86 of the General Director of the State Forests of July 19, 2022 on the amendment of the annex to Decision No. 34 of the General Director of the State Forests of May 12, 2022 on introduction to the use of the "Description of the standard of forestry work performance technology" in organizational units of the State Forests (MZ.011.4.2022); Appendix No. 3.2. Description of the standard of forestry work performance technology in the Regional Directorate of State Forests in Krosno adopted by Decision No. 19 of the Regional Director of the State Forests in Krosno of June 21, 2022 on the introduction of the "Description of the standard of forest works" in forest districts grouped in the Regional Directorate of State Forests in Krosno (DK.0070.1.2022) and Decision No. 73 of the Director of the Regional Directorate of State Forests in Krosno of July 29, 2022 on the change Annex to Decision No. 19 of the Director of the Regional Directorate of State Forests in Krosno of June 21, 2022 on the introduction of the "Description of the standard of forestry work technology" in forest districts grouped in the Regional Directorate of State Forests, ERRATA of 11.10.2022, ERRATA 2 - 12.10.2022 specified in Annex 3.1. to the SWZ and in Annex 3.2. to the SWZ a detailed description of the technology standard for performing individual forestry works (activities) is the basis for determining the quality requirements relating to the elements making up the subject of the contract (Annex 2 to the SWZ). If the action described in the above-mentioned annexes has not been provided for in the description of the subject of the contract (Annex No. 2 to the SWZ), then in this respect the provisions of Annex No. 3.1. to the SWZ and in Annex No. 3.2. to the SWZ do not apply.

Descriptions of activity codes describing individual forest works (activities) included in the subject of the contract are described in Appendix No. 3 to the SWZ.

A description of the rules of the procedure for the acceptance of forest works is included in Annex 3 to the SWZ.

The material scope of the contract includes the total quantities of works in the field of forest breeding and protection, fire protection, logging and skidding, repairs and implementation of new skidding routes resulting from Annex 2 to the SWZ, which consists of: Appendix No. 2.1. – planned size of works; Appendix No. 2.2. - detailed size of works by groups of activities, activities and location; Appendix 2.3.1. – forestry characteristics in terms of timber harvesting; Appendix No. 2.3.2. – assortment system of timber harvesting in forestry; Appendix No. 2.3.3. – a list of distances and conditions of skidding wood; Appendix No. 2.3.4. – list of items with additional difficulties in obtaining and skidding; Appendix 2.3.5. – list of items not available for machine acquisition; Appendix 2.3.6. – information on the optimal technology of logging (potential); Appendix No. 2.4.1. - information on the nature of forest care (zones for mowing weeds); Appendix No. 2.4.2. - list of items not available for renewal made with the help of a planter. The material scopes listed in the annexes included in Annex 2 are estimates. Quality standards relating to all essential features of the subject of the contract are set out in Annex 3 to the SWZ, which consists of: Annex 3.1. "Description of the standard of forestry work performance technology" adopted by Decision No. 34 of the General Director of the State Forests of May 12, 2022 on the introduction of the "Description of the standard of forestry work performance technology" in organizational units of the State Forests (EZ.011.13.2022) and Decision No. 86 of the General Director of the State Forests of July 19, 2022 on the amendment of the annex to Decision No. 34 of the General Director of the State Forests of May 12, 2022 on introduction to the use of the "Description of the standard of forestry work performance technology" in organizational units of the State Forests (MZ.011.4.2022); Appendix No. 3.2. Description of the standard of forestry work performance technology in the Regional Directorate of State Forests in Krosno adopted by Decision No. 19 of the Regional Director of the State Forests in Krosno of June 21, 2022 on the introduction of the "Description of the standard of forest works" in forest districts grouped in the Regional Directorate of State Forests in Krosno (DK.0070.1.2022) and Decision No. 73 of the Director of the Regional Directorate of State Forests in Krosno of July 29, 2022 on the change Annex to Decision No. 19 of the Director of the Regional Directorate of State Forests in Krosno of June 21, 2022 on the introduction of the "Description of the standard of forestry work technology" in forest districts grouped in the Regional Directorate of State Forests, ERRATA of 11.10.2022, ERRATA 2 - 12.10.2022 specified in Annex 3.1. to the SWZ and in Annex 3.2. to the SWZ a detailed description of the technology standard for performing individual forestry works (activities) is the basis for determining the quality requirements relating to the elements making up the subject of the contract (Annex 2 to the SWZ). If the action described in the above-mentioned annexes has not been provided for in the description of the subject of the contract (Annex No. 2 to the SWZ), then in this respect the provisions of Annex No. 3.1. to the SWZ and in Annex No. 3.2. to the SWZ do not apply.

Descriptions of activity codes describing individual forest works (activities) included in the subject of the contract are described in Appendix No. 3 to the SWZ.

A description of the rules of the procedure for the acceptance of forest works is included in Annex 3 to the SWZ.

The material scope of the contract includes the total quantities of works in the field of forest breeding and protection, fire protection, logging and skidding, repairs and implementation of new skidding routes resulting from Annex 2 to the SWZ, which consists of: Appendix No. 2.1. – planned size of works; Appendix No. 2.2. - detailed size of works by groups of activities, activities and location; Appendix 2.3.1. – forestry characteristics in terms of timber harvesting; Appendix No. 2.3.2. – assortment system of timber harvesting in forestry; Appendix No. 2.3.3. – a list of distances and conditions of skidding wood; Appendix No. 2.3.4. – list of items with additional difficulties in obtaining and skidding; Appendix 2.3.5. – list of items not available for machine acquisition; Appendix 2.3.6. – information on the optimal technology of logging (potential); Appendix No. 2.4.1. - information on the nature of forest care (zones for mowing weeds); Appendix No. 2.4.2. - list of items not available for renewal made with the help of a planter. The material scopes listed in the annexes included in Annex 2 are estimates. Quality standards relating to all essential features of the subject of the contract are set out in Annex 3 to the SWZ, which consists of: Annex 3.1. "Description of the standard of forestry work performance technology" adopted by Decision No. 34 of the General Director of the State Forests of May 12, 2022 on the introduction of the "Description of the standard of forestry work performance technology" in organizational units of the State Forests (EZ.011.13.2022) and Decision No. 86 of the General Director of the State Forests of July 19, 2022 on the amendment of the annex to Decision No. 34 of the General Director of the State Forests of May 12, 2022 on introduction to the use of the "Description of the standard of forestry work performance technology" in organizational units of the State Forests (MZ.011.4.2022); Appendix No. 3.2. Description of the standard of forestry work performance technology in the Regional Directorate of State Forests in Krosno adopted by Decision No. 19 of the Regional Director of the State Forests in Krosno of June 21, 2022 on the introduction of the "Description of the standard of forest works" in forest districts grouped in the Regional Directorate of State Forests in Krosno (DK.0070.1.2022) and Decision No. 73 of the Director of the Regional Directorate of State Forests in Krosno of July 29, 2022 on the change Annex to Decision No. 19 of the Director of the Regional Directorate of State Forests in Krosno of June 21, 2022 on the introduction of the "Description of the standard of forestry work technology" in forest districts grouped in the Regional Directorate of State Forests, ERRATA of 11.10.2022, ERRATA 2 - 12.10.2022 specified in Annex 3.1. to the SWZ and in Annex 3.2. to the SWZ a detailed description of the technology standard for performing individual forestry works (activities) is the basis for determining the quality requirements relating to the elements making up the subject of the contract (Annex 2 to the SWZ). If the action described in the above-mentioned annexes has not been provided for in the description of the subject of the contract (Annex No. 2 to the SWZ), then in this respect the provisions of Annex No. 3.1. to the SWZ and in Annex No. 3.2. to the SWZ do not apply.

Descriptions of activity codes describing individual forest works (activities) included in the subject of the contract are described in Appendix No. 3 to the SWZ.

A description of the rules of the procedure for the acceptance of forest works is included in Annex 3 to the SWZ.

The material scope of the contract includes the total quantities of works in the field of forest breeding and protection, fire protection, logging and skidding, repairs and implementation of new skidding routes resulting from Annex 2 to the SWZ, which consists of: Appendix No. 2.1. – planned size of works; Appendix No. 2.2. - detailed size of works by groups of activities, activities and location; Appendix 2.3.1. – forestry characteristics in terms of timber harvesting; Appendix No. 2.3.2. – assortment system of timber harvesting in forestry; Appendix No. 2.3.3. – a list of distances and conditions of skidding wood; Appendix No. 2.3.4. – list of items with additional difficulties in obtaining and skidding; Appendix 2.3.5. – list of items not available for machine acquisition; Appendix 2.3.6. – information on the optimal technology of logging (potential); Appendix No. 2.4.1. - information on the nature of forest care (zones for mowing weeds); Appendix No. 2.4.2. - list of items not available for renewal made with the help of a planter. The material scopes listed in the annexes included in Annex 2 are estimates. Quality standards relating to all essential features of the subject of the contract are set out in Annex 3 to the SWZ, which consists of: Annex 3.1. "Description of the standard of forestry work performance technology" adopted by Decision No. 34 of the General Director of the State Forests of May 12, 2022 on the introduction of the "Description of the standard of forestry work performance technology" in organizational units of the State Forests (EZ.011.13.2022) and Decision No. 86 of the General Director of the State Forests of July 19, 2022 on the amendment of the annex to Decision No. 34 of the General Director of the State Forests of May 12, 2022 on introduction to the use of the "Description of the standard of forestry work performance technology" in organizational units of the State Forests (MZ.011.4.2022); Appendix No. 3.2. Description of the standard of forestry work performance technology in the Regional Directorate of State Forests in Krosno adopted by Decision No. 19 of the Regional Director of the State Forests in Krosno of June 21, 2022 on the introduction of the "Description of the standard of forest works" in forest districts grouped in the Regional Directorate of State Forests in Krosno (DK.0070.1.2022) and Decision No. 73 of the Director of the Regional Directorate of State Forests in Krosno of July 29, 2022 on the change Annex to Decision No. 19 of the Director of the Regional Directorate of State Forests in Krosno of June 21, 2022 on the introduction of the "Description of the standard of forestry work technology" in forest districts grouped in the Regional Directorate of State Forests, ERRATA of 11.10.2022, ERRATA 2 - 12.10.2022 specified in Annex 3.1. to the SWZ and in Annex 3.2. to the SWZ a detailed description of the technology standard for performing individual forestry works (activities) is the basis for determining the quality requirements relating to the elements making up the subject of the contract (Annex 2 to the SWZ). If the action described in the above-mentioned annexes has not been provided for in the description of the subject of the contract (Annex No. 2 to the SWZ), then in this respect the provisions of Annex No. 3.1. to the SWZ and in Annex No. 3.2. to the SWZ do not apply.

Descriptions of activity codes describing individual forest works (activities) included in the subject of the contract are described in Appendix No. 3 to the SWZ.

A description of the rules of the procedure for the acceptance of forest works is included in Annex 3 to the SWZ.

The material scope of the contract includes the total quantities of works in the field of forest breeding and protection, fire protection, logging and skidding, repairs and implementation of new skidding routes resulting from Annex 2 to the SWZ, which consists of: Appendix No. 2.1. – planned size of works; Appendix No. 2.2. - detailed size of works by groups of activities, activities and location; Appendix 2.3.1. – forestry characteristics in terms of timber harvesting; Appendix No. 2.3.2. – assortment system of timber harvesting in forestry; Appendix No. 2.3.3. – a list of distances and conditions of skidding wood; Appendix No. 2.3.4. – list of items with additional difficulties in obtaining and skidding; Appendix 2.3.5. – list of items not available for machine acquisition; Appendix 2.3.6. – information on the optimal technology of logging (potential); Appendix No. 2.4.1. - information on the nature of forest care (zones for mowing weeds); Appendix No. 2.4.2. - list of items not available for renewal made with the help of a planter. The material scopes listed in the annexes included in Annex 2 are estimates. Quality standards relating to all essential features of the subject of the contract are set out in Annex 3 to the SWZ, which consists of: Annex 3.1. "Description of the standard of forestry work performance technology" adopted by Decision No. 34 of the General Director of the State Forests of May 12, 2022 on the introduction of the "Description of the standard of forestry work performance technology" in organizational units of the State Forests (EZ.011.13.2022) and Decision No. 86 of the General Director of the State Forests of July 19, 2022 on the amendment of the annex to Decision No. 34 of the General Director of the State Forests of May 12, 2022 on introduction to the use of the "Description of the standard of forestry work performance technology" in organizational units of the State Forests (MZ.011.4.2022); Appendix No. 3.2. Description of the standard of forestry work performance technology in the Regional Directorate of State Forests in Krosno adopted by Decision No. 19 of the Regional Director of the State Forests in Krosno of June 21, 2022 on the introduction of the "Description of the standard of forest works" in forest districts grouped in the Regional Directorate of State Forests in Krosno (DK.0070.1.2022) and Decision No. 73 of the Director of the Regional Directorate of State Forests in Krosno of July 29, 2022 on the change Annex to Decision No. 19 of the Director of the Regional Directorate of State Forests in Krosno of June 21, 2022 on the introduction of the "Description of the standard of forestry work technology" in forest districts grouped in the Regional Directorate of State Forests, ERRATA of 11.10.2022, ERRATA 2 - 12.10.2022 specified in Annex 3.1. to the SWZ and in Annex 3.2. to the SWZ a detailed description of the technology standard for performing individual forestry works (activities) is the basis for determining the quality requirements relating to the elements making up the subject of the contract (Annex 2 to the SWZ). If the action described in the above-mentioned annexes has not been provided for in the description of the subject of the contract (Annex No. 2 to the SWZ), then in this respect the provisions of Annex No. 3.1. to the SWZ and in Annex No. 3.2. to the SWZ do not apply.

Descriptions of activity codes describing individual forest works (activities) included in the subject of the contract are described in Appendix No. 3 to the SWZ.

A description of the rules of the procedure for the acceptance of forest works is included in Annex 3 to the SWZ.

The material scope of the contract includes the total quantities of works in the field of forest breeding and protection, fire protection, logging and skidding, repairs and implementation of new skidding routes resulting from Annex 2 to the SWZ, which consists of: Appendix No. 2.1. – planned size of works; Appendix No. 2.2. - detailed size of works by groups of activities, activities and location; Appendix 2.3.1. – forestry characteristics in terms of timber harvesting; Appendix No. 2.3.2. – assortment system of timber harvesting in forestry; Appendix No. 2.3.3. – a list of distances and conditions of skidding wood; Appendix No. 2.3.4. – list of items with additional difficulties in obtaining and skidding; Appendix 2.3.5. – list of items not available for machine acquisition; Appendix 2.3.6. – information on the optimal technology of logging (potential); Appendix No. 2.4.1. - information on the nature of forest care (zones for mowing weeds); Appendix No. 2.4.2. - list of items not available for renewal made with the help of a planter. The material scopes listed in the annexes included in Annex 2 are estimates. Quality standards relating to all essential features of the subject of the contract are set out in Annex 3 to the SWZ, which consists of: Annex 3.1. "Description of the standard of forestry work performance technology" adopted by Decision No. 34 of the General Director of the State Forests of May 12, 2022 on the introduction of the "Description of the standard of forestry work performance technology" in organizational units of the State Forests (EZ.011.13.2022) and Decision No. 86 of the General Director of the State Forests of July 19, 2022 on the amendment of the annex to Decision No. 34 of the General Director of the State Forests of May 12, 2022 on introduction to the use of the "Description of the standard of forestry work performance technology" in organizational units of the State Forests (MZ.011.4.2022); Appendix No. 3.2. Description of the standard of forestry work performance technology in the Regional Directorate of State Forests in Krosno adopted by Decision No. 19 of the Regional Director of the State Forests in Krosno of June 21, 2022 on the introduction of the "Description of the standard of forest works" in forest districts grouped in the Regional Directorate of State Forests in Krosno (DK.0070.1.2022) and Decision No. 73 of the Director of the Regional Directorate of State Forests in Krosno of July 29, 2022 on the change Annex to Decision No. 19 of the Director of the Regional Directorate of State Forests in Krosno of June 21, 2022 on the introduction of the "Description of the standard of forestry work technology" in forest districts grouped in the Regional Directorate of State Forests, ERRATA of 11.10.2022, ERRATA 2 - 12.10.2022 specified in Annex 3.1. to the SWZ and in Annex 3.2. to the SWZ a detailed description of the technology standard for performing individual forestry works (activities) is the basis for determining the quality requirements relating to the elements making up the subject of the contract (Annex 2 to the SWZ). If the action described in the above-mentioned annexes has not been provided for in the description of the subject of the contract (Annex No. 2 to the SWZ), then in this respect the provisions of Annex No. 3.1. to the SWZ and in Annex No. 3.2. to the SWZ do not apply.

Descriptions of activity codes describing individual forest works (activities) included in the subject of the contract are described in Appendix No. 3 to the SWZ.

A description of the rules of the procedure for the acceptance of forest works is included in Annex 3 to the SWZ.