1. The proposed method of managing components for RDF production must comply with applicable law and recovery processes specified in Annex 1 to the Act of 14 December 2012 on waste.

2. The contractor's purpose of waste processing by the contractor is the production of alternative fuel.

3. The estimated amount of waste that the contracting authority intends to transfer during the contract period is 9,000 Mg (subject to the possibility of transferring a smaller amount, without financial consequences).

4. Waste code 19 12 12 other wastes from mechanical treatment of municipal waste - an intermediate for the production of alternative fuel.

5. Loose or cubed material.

6. Plastic waste and a small amount of paper, contaminated by municipal waste, PVC-free.

7. Mixed and raw municipal waste.

8. Transport on the side of the Employer.

1. The subject of the contract is the service of further waste management in the recovery process - an intermediate for the production of alternative fuel (waste code 19 12 12) from a municipal installation located in Poświętne gm. Płońsk.

2. The proposed method of managing components for RDF production must comply with applicable law and recovery processes specified in Annex 1 to the Act of 14 December 2012 on waste.

3. the contractor's purpose of waste processing by the contractor is the production of alternative fuel.

4. The estimated amount of waste that the contracting authority intends to transfer during the contract period is 9,000 Mg (subject to the possibility of transferring a smaller amount, without financial consequences).

5. The amount of waste to be managed indicated in the table is an approximate quantity, however it has been estimated with due diligence and in line with our current demand.

6. Waste code 19 12 12 - other wastes from mechanical treatment of municipal waste - an intermediate for the production of alternative fuel. Loose or cubed material Waste plastics and a small amount of paper, contaminated with municipal waste residues, PVC-free. Municipal and mixed waste.

7. Waste intended for further development arises on a sorting line on which unsorted municipal waste (code 20 03 01) and raw material waste (from groups 15 and 20) are sorted.

8. Waste will be delivered by means of transport of the Employer to the Contractor's installation with the agreed frequency and agreed dates.

9. Waste must be subjected to a recovery process by the Contractor in a manner consistent with applicable law.