Delivery of 5 wheel loaders on a rental basis including full service package.

1. Scope of delivery: delivery (delivery / removal), commissioning u. Instruction of the client as well as full service during the entire term; Installation of a separate telematics system by the AG, data diagnostic tap via Can-Bus;

2. Operating conditions: operating time 24/7 (shift operation - high availability required)

- Operation even in halls with a dusty environment and fire hazard;

- Increased corrosion due to use with salt and scrap loading (sea climate suitability);

- Temperature range from -30 O C to 40 O C Handling goods: bark, fertilizers, cereals, wood chips, wood pellets, HBI, salt, sand, scrap, chippings, steel pellets, peat, sugar beets.

3. Technical data (generally applicable and applicable to all 5 devices) Please also note the specific requirements under point VI.3. "Additional information":

1. Motor:

- Diesel EU Stage V Tier 4 with active regeneration during operation;

- Coarse-mesh cooler with automatic fan reversal;

- Turbo cyclone air pre-filter;

- Automatic idle shutdown;

- Ø fuel consumption in liters per hour;

- Operation with colored diesel according to EN 590.

2. Drive:

- All-wheel drive with automatic differential lock;

- Powershift transmission with 4 forward and reverse gears each;

- Gear selection via toggle switch on steering column.

3. Chassis:

- Floating axle bearing (swinging rear axle);

- oil cooling of the axles;

- Rear wheels with additional ballasting (water filling).

4. Frame:

- Electrics and hydraulics protected in the frame;

- welded counterweight;

- underbody protection front / rear;

- Tow coupling at the rear;

- Depending on the need, additional load in the rear area.

5.Brake system: version according to EN ISO 3450: 2011,

6. Steering:

- Articulated steering with each. approx. 35 O Steering lock;

- Actuation via steering wheel with rotary knob;

- Individually adjustable steering column.

7. Hydraulic system:

- Hydraulic cylinder with pipe rupture protection and end position damping;

- Additional circuit for hydraulically driven attachments;

- Actuation via lever control on the right of the driver's seat;

- Execution of hydraulic hose fittings in stainless steel if necessary.

8. Working equipment:

- mast with parallel guidance;

- Central lubrication system with filling pump;

- Adjustable automatic blade positioning;

- Vibration damping or floating position for load travel.

9.Cabin:

- Pressurized cabin with fine dust filter and protective ventilation in accordance with TRGS 554;

- Vibration-damped cabin mounting;

- ROPS rollover protection according to EN ISO 3471 and FOPS impact protection according to EN ISO 3449;

- Sound emission inside / outside according to EN ISO 6396 or 2000/14 / EG;

- Tinted windscreen made of laminated glass with sun visor;

- left / right sliding window;

- windscreen washer system for front and rear windows;

- heating, air conditioning;

- Auxiliary heating or fan heater with 230 volt connection including connection cable;

- interior lighting;

- 12 volt socket with USB connection;

- radio with USB connection;

- 2 brake and 1 accelerator pedal;

- storage compartments and document storage;

- coat hooks;

- cup holder;

- emergency hammer;

- 2 interior and 2 electrically adjustable exterior mirrors (heated);

- preparation for radio installation;

- Holder adjustable for 10 "tablet;

- Removable rubber floor mat.

10. Driver's seat:

- Air suspension or vibration damping with headrest and 3-point seat belt;

- Seat inclination and depth as well as backrest and longitudinal position individually adjustable;

- lumbar support;

- armrest with integrated control panel;

- seat heating.

11. Electrical system:

- 24 volt operating voltage;

- Main battery switch.

12. Control:

- Multi-function display with status messages such as falling below fill levels etc .;

- Telematics system with data retrieval (operating hours, fuel consumption, load and idle times) and external interface for data tapping from the CAN bus system.

13.Lighting:

- 2 headlights with high and low beam as well as integrated indicators with hazard warning function;

- 2 additional headlights (LED);

- 12 work lights (LED) in the roof area of the cabin (4 front, 2 left / right and 4 rear);

- 2 pieces of reversing lights (LED);

- Combined brake and taillights with integrated indicators (hazard warning function);

- Beacon light (LED) on the cabin roof.

14. Safety devices:

- Exhaust system or exhaust with spark arrester;

- bugle;

- acoustic reversing warning;

- Front and rear camera according to EN ISO 5006 with 10 "display;

- Quick coupler with acoustic alarm in the unlocked state;

- Non-slip and non-slip steps / treads with handrails or handles;

- 1 piece of fire extinguisher;

- 2 pieces of wheel chocks.

15. Other:

- bonnet with electric tilting device;

- front and rear fenders with mud flaps;

- Tool for daily maintenance including storage option;

- Internal numbering according to the specifications of the AG on the hood left / right;

- Installation of radios provided by the client.

16. Attachments:

- Robust or low-weight design;

- Overflow protection to avoid damage to the mast;

- Identical screw-on knives (rotatable).

4. Commissioning / trial operation: Transport to / from, including disassembly / assembly, is carried out by the contractor.

Commissioning and a 1-month trial run including instruction by the client, including any necessary adjustments, is also carried out by the contractor and is part of the rental agreement; 50 Documentation: For commissioning, the contractor must hand over all information for the devices mentioned, including their facilities, to the client digitally on CD.

Specifically, these are the following documents:

- declaration of conformity; Maintenance / repair instructions including spare parts / parts lists and circuit diagrams;

- Operating instructions (additionally twice in paper form);

- Overview of all wear parts to be changed within the rental period, including their change intervals.

6. Basis of contract: Start of rental: 1.6.2021; Rental period: 48:

- Months - If possible with optional termination option for individual devices for the first time after 36 months;

—Operating hours: 2000 operating hours per year and per device;

—Insurance: The AG takes out comprehensive insurance based on the applicable ABMG.

The devices are included in the liability insurance of the AG. In addition, the AG takes out a comprehensive machinery insurance;

7. Full service content: As part of the full service, the contractor must provide the following services:

Labor and travel costs, freight costs, disposal of consumables and consumer goods, provision of lubricants and operating materials, maintenance, inspection and testing including material and cleaning as well as timely notification to the client (at least 50 hours before the due date), preventive repair including material and cleaning, monitoring of the state of wear of parts in contact with the floor, including the display of necessary change intervals to the AG (the replacement takes place after a separate order by the AG), on-call service, reaction time of max. 4 hours, processing of guarantee services, keeping work certificates or service reports.

8. Other: Contract. The basis is the rental agreement including the annex, which will be made available to you if you participate successfully in the offer request.