Construction of a youth centre for the youth training centre of the 1st FC Union Berlin e.V. This new building is divided into two construction phases, BT1 as a two-storey building and component 2 as a single-storey building. The new building will not have a basement, in the eastern area is to be founded deeper by a 700 mm rainwater pipe. The outer walls consist mainly of sand-lime bricks, the ceilings of concrete ceilings (filigree ceilings). The two-storey building will have an extensively greened roof, the single-storey building a football court.
Heating / plumbing with the services:
- Local heating pipe 35 m, 2 x DN 80. Media pipe made of cross-linked polyethylene, insulation made of polyurethane high-pressure foam with thermal conductivity Y50 ≤ 0.0260 W/mK (Ø 160 mm)
- Central heating system consisting of: pressure maintenance with automatic replenishment, combined supply and return distributor 180/180 with horizontally welded hydraulic diverter underneath, heating circuit control with high-efficiency pumps, hydraulically separated transfer station for LTA, drinking water heating with high-performance fresh water tank, building automation for the heating centre
- Heat distribution systems stainless steel system pipes CrNi 1.4301, approx. 800 m, d15x1mm to d35x1.5mm, including stainless steel pressfittings CrNiMo steel 1.4401, shut-off and string control valves, pipe fasteners and thermal insulation according to EnEV
- Heat distribution systems C-steel system pipe externally galvanized, approx. 1,900 m, d15x1mm to 88.9x2mm, including pressfittings, shut-off and string control valves, pipe fasteners and thermal insulation according to EnEV
- Space heating surfaces consisting of: 16 pcs underfloor convectors, 3 units free-standing hood convectors, 4 pcs bank radiators, 119 pcs. Plan hygienic compact radiators
- Drinking water house connection pipe, underground, approx. 120 m, PE pressure pipeline PE100-RCDN80 from meter transfer shaft BWB to house feed R0.38.
- Drinking water house feed with filter backwash automatic, TW softening system, TW pressure booster system
- Drinking water installation pipes stainless steel system pipe 1.4401 CrNiMo, approx. 2450 m, d15x1mm to d88.9x2mm, including pressfittings, shut-off and string control valves (circulation), pipe fasteners and thermal insulation according to EnEV
- Water management with control of sanitary tapping fittings for washbasins and showers
- 188 pcs. installation elements for washbasins, showers, sinks, wall-mounted toilets and urinals
- Sanitary facilities, such as 80 pcs. showers, 37 pcs. washbasins, 6 pcs. sinks, 41 pcs. WC's and urinals
- Laundry and dry cleaning facilities
- 86 stainless steel shower channels, 16 pcs floor drains
- Sewage plumbing systems approx. 340m d40 to d90, including fittings and pipe fasteners