I. Delivery of agricultural tractors with loaders and boom mowers

Task No. 1

Delivery: 1 pc. agricultural tractor with loader and flail mower on a boom to the Region of Provincial Roads in Biała Podlaska – Road Circuit in Janów Podlaski

Task No. 2

Delivery: 1 pc. agricultural tractor with loader and flail mower on a boom to the Provincial Roads Region in Włodawa

Exercise NR 3

Delivery: 1 pc. agricultural tractor with loader and flail mower on a boom to the Region of Provincial Roads in Zamość – Road Circuit in Józefów

II. Information on the evidence in question

1. The contracting authority requires the submission of the evidence in question as part of this tender procedure, subject to point IV point 9 of the SWZ. The contractor shall submit with the tender an extract from the approval certificate of the tractor(s) offered or equivalent evidence in question. cd. in IV.2.7)

Required minimum parameters for an agricultural tractor Task No. 1

1) Brand new year of production 2022, 2023

(2) With a net rated power as stated in the approval certificate of not less than 110 kW, meeting STAGE V emission standards

3) Engine minimum four-cylinder, liquid-cooled with capacity. Min. 4000 cc

4) Mechanical gearbox, synchronized min 17 x 16

5) Weight of tractors min. 5500 kg. The customer accepts 5500 kg as the gross weight of the tractor with the installed linkage (without loader) without additional ballast

6) Variable Expense Hydraulics with capacity min. 120 l/min

7) Shock-absorbed cabin. Cabin equipment: heated, air-conditioned, headlights front and rear, windscreen wiper, radio, soundproofing

8) Cabin equipped with 2 seats with approval for 2 persons

9) LED flash: orange light mounted on the roof of tractors with the inscription ROAD SERVICE

10) Tyres not less than front: 440/65R28, rear: 540/65R38

11) Adjustable transport hitch for sliding pin trailer and bottom hitch

12) Integrated front linkage, joystick controlled from the operator's cab

13) Hydraulic output min. 3 pairs at the rear of the tractor

14) Min 3 PTO speeds (540 /540E/1000 /rpm)

15) 4 x 4 (4 WD) drive mechanically or electro-hydraulically engaged

16) Electro-hydraulic or mechanically attached differential lock

17) Electrohydraulic reverse

18) Rear linkage with a lifting capacity of min. 5000 kg, prepared for multi-purpose boom attachment

19) Side inscriptions on the door:

Provincial Roads Authority in Lublin, Provincial Roads Region in Biała Podlaska

20) Documentation of the tractor in Polish:

a) DTR with user manual

b) approval / entry into service of the tractor /,

c) service book

(d) guarantee documents

21) Warranty period min 12 months from the date of trouble-free, protocol acceptance without limit of operating hours

22) Warranty service or assistance within 24 hours from the time of notification on a given day at the place of immobilization in the case of a tractor

Minimum parameters for front loader Task 1

1) Brand new, year of manufacture 2022, 2023

2) Joystick control,

3) Samopoziomowanie,

4) Mounting of the equipment euro-frame,

5) Nominal load capacity – min. 2450 kg,

6) Loading height – min. 3500 mm,

7) Height at max. bucket deflection – min. 2950 mm,

8) Universal shovel with a width of min. 2200 mm,

9) Forged steel pallet forks, adjustable,

10) DTR,

11) Warranty min. 12 months from the date of faultless protocol acceptance.

Minimum parameters for flail mower - Task No. 1

1) Brand new, year of manufacture 2022, 2023

2) Working range on the boom min. 5.5 m,

3) Cutting options: front/rear bidirectional, hydromotor on the mowing head,

4) Mowing knives – front/rear,

5) Mower control – control panel adapted for installation in the tractor cabin,

6) Wałek WOM,

7) The width of the mowing head min. 1.20 m,

8) Hydraulics – smooth adjustment in 4 planes of the boom,

9) Guarantee min. 12 months from the date of faultless protocol, acceptance.

Required minimum parameters for an agricultural tractor Task No. 2

1) Brand new year of production 2022, 2023

(2) With a net rated power as stated in the approval certificate of not less than 110 kW, meeting STAGE V emission standards

3) Engine minimum four-cylinder, liquid-cooled with capacity. Min. 4000 cc

4) Mechanical gearbox, synchronized min 17 x 16

5) Weight of tractors min. 5500 kg. The customer accepts 5500 kg as the gross weight of the tractor with the installed linkage (without loader) without additional ballast

6) Variable Expense Hydraulics with capacity min. 120 l/min

7) Shock-absorbed cabin. Cabin equipment: heated, air-conditioned, headlights front and rear, windscreen wiper, radio, soundproofing

8) Cabin equipped with 2 seats with approval for 2 persons

9) LED flash: orange light mounted on the roof of tractors with the inscription ROAD SERVICE

10) Tyres not less than front: 440/65R28, rear: 540/65R38

11) Adjustable transport hitch for sliding pin trailer and bottom hitch

12) Integrated front linkage, joystick controlled from the operator's cab

13) Hydraulic output min. 3 pairs at the rear of the tractor

14) Min 3 PTO speeds (540 /540E/1000 /rpm)

15) 4 x 4 (4 WD) drive mechanically or electro-hydraulically engaged

16) Electro-hydraulic or mechanically attached differential lock

17) Electrohydraulic reverse

18) Rear linkage with a lifting capacity of min. 5000 kg, prepared for multi-purpose boom attachment

19) Side inscriptions on the door:

Provincial Roads Authority in Lublin, Region of Provincial Roads in Włodawa

20) Documentation of the tractor in Polish:

a) DTR with user manual

b) approval / entry into service of the tractor /,

c) service book

(d) guarantee documents

21) Warranty period min 12 months from the date of trouble-free, protocol acceptance without limit of operating hours

22) Warranty service or assistance within 24 hours from the time of notification on a given day at the place of immobilization in the case of a tractor

Minimum parameters for front loader Task 2

1) Brand new, year of manufacture 2022, 2023

2) Joystick control,

3) Samopoziomowanie,

4) Mounting of the equipment euro-frame,

5) Nominal load capacity – min. 2450 kg,

6) Loading height – min. 3500 mm,

7) Height at max. bucket deflection – min. 2950 mm,

8) Universal shovel with a width of min. 2200 mm,

9) Forged steel pallet forks, adjustable,

10) DTR,

11) Warranty min. 12 months from the date of faultless protocol acceptance.

Minimum parameters for a flail mower - Task No. 2

1) Brand new, year of manufacture 2022, 2023

2) Working range on the boom min. 5.5 m,

3) Cutting options: front/rear bidirectional, hydromotor on the mowing head,

4) Mowing knives – front/rear,

5) Mower control – control panel adapted for installation in the tractor cabin,

6) Wałek WOM,

7) The width of the mowing head min. 1.20 m,

8) Hydraulics – smooth adjustment in 4 planes of the boom,

9) Guarantee min. 12 months from the date of faultless protocol, acceptance.

Required minimum parameters for an agricultural tractor Task No. 3

1) Brand new year of production 2022, 2023

(2) With a net rated power as stated in the approval certificate of not less than 110 kW, meeting STAGE V emission standards

3) Engine minimum four-cylinder, liquid-cooled with capacity. Min. 4000 cc

4) Mechanical gearbox, synchronized min 17 x 16

5) Weight of tractors min. 5500 kg. The customer accepts 5500 kg as the gross weight of the tractor with the installed linkage (without loader) without additional ballast

6) Variable Expense Hydraulics with capacity min. 120 l/min

7) Shock-absorbed cabin. Cabin equipment: heated, air-conditioned, headlights front and rear, windscreen wiper, radio, soundproofing

8) Cabin equipped with 2 seats with approval for 2 persons

9) LED flash: orange light mounted on the roof of tractors with the inscription ROAD SERVICE

10) Tyres not less than front: 440/65R28, rear: 540/65R38

11) Adjustable transport hitch for sliding pin trailer and bottom hitch

12) Integrated front linkage, joystick controlled from the operator's cab

13) Hydraulic output min. 3 pairs at the rear of the tractor

14) Min 3 PTO speeds (540 /540E/1000 /rpm)

15) 4 x 4 (4 WD) drive mechanically or electro-hydraulically engaged

16) Electro-hydraulic or mechanically attached differential lock

17) Electrohydraulic reverse

18) Rear linkage with a lifting capacity of min. 5000 kg, prepared for multi-purpose boom attachment

19) Side inscriptions on the door:

Provincial Roads Authority in Lublin, Region of Provincial Roads in Zamość

20) Documentation of the tractor in Polish:

a) DTR with user manual

b) approval / entry into service of the tractor /,

c) service book

(d) guarantee documents

21) Warranty period min 12 months from the date of trouble-free, protocol acceptance without limit of operating hours

22) Warranty service or assistance within 24 hours from the time of notification on a given day at the place of immobilization in the case of a tractor

Minimum parameters for front loader Task 3

1) Brand new, year of manufacture 2022, 2023

2) Joystick control,

3) Samopoziomowanie,

4) Mounting of the equipment euro-frame,

5) Nominal load capacity – min. 2450 kg,

6) Loading height – min. 3500 mm,

7) Height at max. bucket deflection – min. 2950 mm,

8) Universal shovel with a width of min. 2200 mm,

9) Forged steel pallet forks, adjustable,

10) DTR,

11) Warranty min. 12 months from the date of faultless protocol acceptance.

Minimum parameters for a flail mower - Task No. 3

1) Brand new, year of manufacture 2022, 2023

2) Working range on the boom min. 5.5 m,

3) Cutting options: front/rear bidirectional, hydromotor on the mowing head,

4) Mowing knives – front/rear,

5) Mower control – control panel adapted for installation in the tractor cabin,

6) Wałek WOM,

7) The width of the mowing head min. 1.20 m,

8) Hydraulics – smooth adjustment in 4 planes of the boom,

9) Guarantee min. 12 months from the date of faultless protocol, acceptance.