Wall and ceiling cladding with glass fabric and dispersion coating or +2K-PU, painting of steel frames and heating coverings, renovation painting on door leaves (HPL)
246 m2 substrate preparation, GK walls filled (no ancillary service)
526 m2 substrate preparation, GK ceiling filled
1545 m2 substrate preparation, MW plastered
115 m2 of substrate sanding, removal of sintered layers
6 m2 plot + spot/filling, cement building; Concrete wall/column
1531 m2 Grundg.+Spachtelg. Q3; Disp.white 2-5mm (masonry, plastered)
246 m2 Grundg.+Spatutelg. Q3; Disp.white 2-5mm (plasterboard, Q2), wall
10 m2 Grundg.+Spatutelg. Q3; Disp.white 2-5mm (concrete, vertical)
26 m2 Grundg.+Spatutelg. Q2; Disp.white 2-5mm (concrete ceilings)
39 m2 Grundg.+Spachtelg. Q3; Disp.weiß 2-5mm (Mauerwerksleibungen)
246 m2 Additional barrier paint on puncture. fabrics (GK), white;
23 m cable slots 5/20 cm night close, Q2; Wall
85 m cable slots 3/5 cm night. close, Q2; Wall
45 holes up to D=10cm after closing, Q2; Wall
32 m2 wall plaster repair, 3mm, partial surface filling (approx. 30%)
51 m2 Ventilation of plaster areas/repairs, walls
100 m3 scaffolding, technical rooms, LK 2, for own services
235 m2 glass fabric+disp.-besch.NA1 sm, A2, white; Wä./Stü. (Q3)
1435 m2 glass fabric+disp.-besch.NA2 sm, A2, white; Wä./Stü. (Q3)
110 m soffits at openings and niches, soffit depth 22cm
16 m soffits at openings and niches, soffit depth 36cm
107 m2 glass fabric+2K-PU-certificateNA1 sg, B1, white; Wä./Stü. (Q3),
29 pcs additional expenditure for Arm.+Besch. to Wä. for Flä. up to 2,5m2
155 pcs additional expenditure for nonwoven cutting under wall components
380 m paint above wall protection (wall)
100 pcs additional allowance cut-outs in glass fabric, ELT cans
440 m2 glass fleece+disp.-besch.NA2 stm, A2, white; Blankets (Q3)
32 m2 glass fleece+2K-PU-certificateNA1 sg, B1, white; plasterboard (Q3),
26 m2 Disp.-besch.NA2 stm/m, white; reason. Cover.
33 pcs additional allowance for coating inspection flaps
105 m2 Prepare surfaces, industrially coated, powder-primed
125 m2 plot. Steel frames first coated, water-bas. 2K PUR acrylic lacquer
17 m water.-bas. Acrylic lacquer g, pipe conduction. Steel unh., up to DN 20,
1689 m elast. Verfug. 5-7mm, Acryl überstreichbar
65 m elast. Available. 5-15mm, silicone (built-in parts medical technology)
22 m elast. Available. 10-25 mm 1K PU sealant with tight.Fkt.
Retrofit 8 m window sills; W=30cm
Clean 90 m2 of coating surfaces (no ancillary service)
135 m2 of old coating, inside, overhaul coating.
30 m2 old coating, non-load-bearing., remove; Walls
10 m2 wallpaper coated, multilayered, remove; Stb./MW-walls w.Plaster
7 m soffits at openings and niches, soffit depth 42cm
4 m2 Grundg.+Spatutelg. Q4; Disp.white 2-5mm (masonry, plastered)
4 m2 Glass fleece, magnetic, 2K-PU-besch., hg (Whiteboard)
16 pcs neodymium cone magnets
61 m2 Disp.-besch.NA2 stm, A2, white; Ceiling (Q3), perforated
8 pcs Remove seals before coating work, attach
20 m2 Prepare surfaces, old coating, derust 10%
2 m2 metal surfaces derusting, partial areas over 10% to 30%
1 m2 metal surfaces filling, partial areas up to 40%
36 m2 HPL area, door leaf 1flg, 2K-PUR sm, WB