Delivery of furniture for the workshops.

17 pcs. rotating spindle stools, 2 pcs. wardrobe, 1 pcs open-plan cabinet, 17 pcs storage rack, 1 pcs laminating table/grinding table, 1 pcs shelf, 5 pcs sledge rack, 1 pcs chemical cabinet, 14 pcs hinged door cabinet, 1 pcs screw rack, 1 pcs welding table, 24 pcs workbench, 12 pcs workshop cabinet

The offered goods must be original packaging.

The main offer also includes the delivery of all specifications listed in the specifications.

parts described in more detail up to the place of use (room recorded in the position text).

Furniture must be assembled complete with all built-in parts for ready-to-use use.

For cabinets, the contractor must take measurements on the construction site.

The required assembly material and removal must also be taken into account.

of all packaging materials from the construction site.

The contractor shall provide a responsible project supervisor as an authorized contact person for all questions relating to the order. Its tasks include, among other things, the

Control of on-site inputs on the construction site and coordination and monitoring of delivery and assembly services.

It is mandatory to have a complete facility in which the individual

furnishings correspond to each other in shape, colors and materials,

that is, are harmoniously coordinated to create a coherent

and ensure consistent furnishing of the individual areas.

All furniture and materials used must be based on the formaldehyde

Emission behaviour have been tested and have an emission potential lower than 0.1 ppm HCHO in order to fall below the guideline value recommended by the health authority. Corresponding certificates and certificates must be submitted at the request of the client. Only wood stains and varnishes based on water-based paint are to be offered.

The series offered must have been produced over a period of at least five years up to the time of submission of the offer and must have proven themselves in practice. In addition, a post-purchase guarantee must be given for at least five years.

A subsequent purchase guarantee for spare parts deliveries and small-scale material (e.g. plastic foot caps, etc.) must be guaranteed for at least 5 years.

The invitation to tender may only offer products which:

- DIN EN ISO 9001 or a quality management system of equivalent type

- DIN EN ISO 14001 or an environmental management system of an equivalent type

- DIN EN ISO 50001 or an energy management system of an equivalent type

are certified.

The quality of the materials must comply with emission class E1.

All materials, coatings, seals and adhesives used must be toxicologically safe and free of odour-nuisance emissions. You have to go through the

have the required test certificates.

No tropical woods may be used to make the furniture.